[Thu May  2 10:37:21 2013] Detection parameters:
  Position = (746.5, 1166.0) = 20 35 1.64 -59 34 9.8
  Extent = 0.5" x 0.5", rotation angle = 81 degrees
  Source counts = 10.8 +/- 3.5
  Background counts = 1.2
  Rate = 0.0002 +/- 6e-05

[Thu May  2 10:37:21 2013] Off-axis axis estimate = 4.98'
[Thu May  2 11:45:02 2013] Using EEF radius (= 1.17 ")to estimate initial spatial extent for simple fitting
[Thu May  2 11:45:02 2013] Initial guess for spatial extent in simple fitting = 1.17"
[Thu May  2 11:45:02 2013] source mask rpix=2.4, npix_max = 33, mask sum = 28, frac = 0.844
[Thu May  2 11:45:02 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 1.17"
[Thu May  2 12:08:54 2013] fullrun_ccd2_acisf12182_pi14-548_cl_pass0_src21.ximg exists
[Thu May  2 12:08:54 2013] fullrun_ccd2_acisf12182_pi14-548_cl_pass0_src21_1.ximg exists
[Thu May  2 12:08:54 2013] Fit fullrun_ccd2_acisf12182_pi14-548_cl_pass0_src21 appears to have run properly
[Thu May  2 12:08:54 2013] fullrun_ccd2_acisf12182_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Thu May  2 12:08:54 2013] fullrun_ccd2_acisf12182_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Thu May  2 12:08:54 2013] Fit fullrun_ccd2_acisf12182_pi14-548_cl_pass0_tfrozen_src21 appears to have run properly
[Thu May  2 13:13:31 2013] Spatial fit model total counts = 20.065700, observed total counts = 22.000000
[Thu May  2 13:13:31 2013] Offset between fit and detection position for source 26 = 0.914789 pixels
[Thu May  2 13:13:31 2013] 19.288310 total counts/ 9.178710 bgd. counts: snr = 3.336900
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.914789 pixels
  Position = (747.3, 1166.4) = 20 35 1.62 -59 34 9.8
  Extent = 0.7 (0.4-1.2)", rotation angle = 0
  Source counts = 10.1 +/- 4.4
  Background counts = 9.2
  Rate = 0.0002 +/- 7e-05
[Thu May  2 13:13:31 2013] Vigneting correction estimate = 1.000000
[Thu May  2 13:13:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 13:13:31 2013] Assessing source extent using major axis lower bound
[Thu May  2 13:13:31 2013] Source does appear to be extended
[Thu May  2 13:13:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 14:08:55 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  2 14:08:55 2013] Initial guess for spatial extent in simple fitting = 0.70"
[Thu May  2 14:08:55 2013] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.076
[Thu May  2 14:08:55 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 0.70"
[Thu May  2 14:32:09 2013] fullrun_ccd2_acisf12182_pi14-548_cl_pass1_src21.ximg exists
[Thu May  2 14:32:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12182_pi14-548_cl_pass1_src21.csv
[Thu May  2 14:32:09 2013] fullrun_ccd2_acisf12182_pi14-548_cl_pass1_src21_1.ximg exists
[Thu May  2 14:32:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12182_pi14-548_cl_pass1_src21.csv
[Thu May  2 14:32:09 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12182_pi14-548_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12182_pi14-548_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 14:32:09 2013] fullrun_ccd2_acisf12182_pi14-548_cl_pass1_tfrozen_src21.ximg exists
[Thu May  2 14:32:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12182_pi14-548_cl_pass1_tfrozen_src21.csv
[Thu May  2 14:32:09 2013] fullrun_ccd2_acisf12182_pi14-548_cl_pass1_tfrozen_src21_1.ximg exists
[Thu May  2 14:32:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12182_pi14-548_cl_pass1_tfrozen_src21.csv
[Thu May  2 14:32:09 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12182_pi14-548_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12182_pi14-548_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 15:48:11 2013] Spatial fit model total counts = 19.814300, observed total counts = 22.000000
[Thu May  2 15:48:11 2013] Offset between fit and detection position for source 26 = 0.015883 pixels
[Thu May  2 15:48:11 2013] 18.833350 total counts/ 8.831050 bgd. counts: snr = 3.365842
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.015883 pixels
  Position = (747.3, 1166.4) = 20 35 1.62 -59 34 9.8
  Extent = 0.7 (0.5-1.2)", rotation angle = 0
  Source counts = 10.0 +/- 4.3
  Background counts = 8.8
  Rate = 0.0002 +/- 7e-05
[Thu May  2 15:48:11 2013] Vigneting correction estimate = 1.000000
[Thu May  2 15:48:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 15:48:11 2013] Assessing source extent using major axis lower bound
[Thu May  2 15:48:11 2013] Source does appear to be extended
[Thu May  2 15:48:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 16:02:53 2013] Writing source region out to fullrun_ccd2_acisf12182_pi14-548_pass1_cl_src26_src.reg
[Thu May  2 16:02:53 2013] Extracting stamp from image fullrun_ccd2_acisf12182_pi14-548_cl_sm2.00.img.gz, (715, 1134) - (779, 1198)
[Thu May  2 16:02:53 2013] Writing fullrun_ccd2_acisf12182_pi14-548_pass1_cl_src26.gif
[Thu May  2 16:14:47 2013] Size of ../../acisf12182/products/events/fullrun_ccd2_acisf12182_pi14-548_pass1_cl_src26_src.evt.gz[events] = 15 counts
[Thu May  2 16:14:47 2013] Mean chipx,y = (933.47, 767.93)
[Thu May  2 16:14:47 2013] Mean tdetx,y = (3828.93, 3152.53)
[Thu May  2 16:14:47 2013] chipx,y range = (914.00-953.00, 750.00-783.00)
[Thu May  2 16:14:47 2013] Size of ../../acisf12182/products/events/fullrun_ccd2_acisf12182_pi14-548_pass1_cl_src26_bgd.evt.gz[events] = 10 counts
[Thu May  2 16:14:49 2013] Not generating rmf since there are only 10 counts
[Thu May  2 16:14:49 2013] arf not found, will run specextract
[Thu May  2 16:15:15 2013] ../../acisf12182/products/spectra/fullrun_ccd2_acisf12182_pi14-548_pass1_cl_src26.warf not found
[Thu May  2 16:15:15 2013] ../../acisf12182/products/spectra/fullrun_ccd2_acisf12182_pi14-548_pass1_cl_src26.wrmf not found
[Thu May  2 16:15:15 2013] Removal of ../../acisf12182/products/spectra/fullrun_ccd2_acisf12182_pi14-548_pass1_cl_src26.soff failed
[Thu May  2 16:19:14 2013] Spectrum 26 has only 10 counts, deleting rmf
[Thu May  2 16:19:14 2013] 175.158
[Thu May  2 16:43:12 2013] Updating aperture counts using extracted products
[Thu May  2 16:43:12 2013] Total counts from fullrun_ccd2_acisf12182_pi14-548_pass1_cl_src26_src.pi.gz = 15.00
[Thu May  2 16:43:12 2013] Total counts from fullrun_ccd2_acisf12182_pi14-548_pass1_cl_src26_bgd.pi.gz = 10.00
[Thu May  2 16:43:12 2013] Got source and background scale factors 0.000002, 0.000018
[Thu May  2 16:43:12 2013] User source parameters:
  Position = (747.3, 1166.4) = 20 35 1.62 -59 34 9.8
  Extent = 0.7 (0.5-1.2)", rotation angle = 0
  Source aperture counts = 14.2 +/- 5.0
  Background aperture counts = 0.8
  Rate = 0.0002 +/- 8e-05

[Thu May  2 16:43:13 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 16:43:13 2013] Using photon index=1.80, rate=0.00017, arf fullrun_ccd2_acisf12182_pi14-548_pass1_cl_src26.arf
[Thu May  2 16:43:13 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu May  2 16:43:13 2013] Updating source flux to 2.3e-15
[Thu May  2 16:43:37 2013] Source 26 has fewer than 100.000000 counts, skipping spectral fitting