[Thu May  2 10:37:21 2013] Detection parameters:
  Position = (644.4, 654.2) = 20 35 8.32 -59 38 21.5
  Extent = 0.8" x 0.6", rotation angle = 134 degrees
  Source counts = 15.7 +/- 4.1
  Background counts = 1.3
  Rate = 0.0003 +/- 7e-05

[Thu May  2 10:37:21 2013] Off-axis axis estimate = 4.74'
[Thu May  2 11:45:02 2013] Using EEF radius (= 1.08 ")to estimate initial spatial extent for simple fitting
[Thu May  2 11:45:02 2013] Initial guess for spatial extent in simple fitting = 1.08"
[Thu May  2 11:45:02 2013] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.861
[Thu May  2 11:45:02 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 1.08"
[Thu May  2 12:08:54 2013] fullrun_ccd2_acisf12182_pi14-548_cl_pass0_src13.ximg exists
[Thu May  2 12:08:54 2013] fullrun_ccd2_acisf12182_pi14-548_cl_pass0_src13_1.ximg exists
[Thu May  2 12:08:54 2013] Fit fullrun_ccd2_acisf12182_pi14-548_cl_pass0_src13 appears to have run properly
[Thu May  2 12:08:54 2013] fullrun_ccd2_acisf12182_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Thu May  2 12:08:54 2013] fullrun_ccd2_acisf12182_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Thu May  2 12:08:54 2013] Fit fullrun_ccd2_acisf12182_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Thu May  2 13:13:31 2013] Spatial fit model total counts = 18.838100, observed total counts = 20.000000
[Thu May  2 13:13:31 2013] Offset between fit and detection position for source 18 = 0.780157 pixels
[Thu May  2 13:13:31 2013] 17.872412 total counts/ 0.095612 bgd. counts: snr = 57.490672
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.780157 pixels
  Position = (644.9, 654.8) = 20 35 8.33 -59 38 21.4
  Extent = 1.0 (0.6-1.3)", rotation angle = 0
  Source counts = 17.8 +/- 4.2
  Background counts = 0.1
  Rate = 0.0003 +/- 7e-05
[Thu May  2 13:13:31 2013] Vigneting correction estimate = 1.000000
[Thu May  2 13:13:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 13:13:31 2013] Assessing source extent using major axis lower bound
[Thu May  2 13:13:31 2013] Source does appear to be extended
[Thu May  2 13:13:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 14:08:55 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  2 14:08:55 2013] Initial guess for spatial extent in simple fitting = 1.03"
[Thu May  2 14:08:55 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.116
[Thu May  2 14:08:55 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 1.03"
[Thu May  2 14:32:08 2013] fullrun_ccd2_acisf12182_pi14-548_cl_pass1_src13.ximg exists
[Thu May  2 14:32:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12182_pi14-548_cl_pass1_src13.csv
[Thu May  2 14:32:08 2013] fullrun_ccd2_acisf12182_pi14-548_cl_pass1_src13_1.ximg exists
[Thu May  2 14:32:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12182_pi14-548_cl_pass1_src13.csv
[Thu May  2 14:32:08 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12182_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12182_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 14:32:09 2013] fullrun_ccd2_acisf12182_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Thu May  2 14:32:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12182_pi14-548_cl_pass1_tfrozen_src13.csv
[Thu May  2 14:32:09 2013] fullrun_ccd2_acisf12182_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Thu May  2 14:32:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12182_pi14-548_cl_pass1_tfrozen_src13.csv
[Thu May  2 14:32:09 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12182_pi14-548_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12182_pi14-548_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 15:48:11 2013] Spatial fit model total counts = 17.572200, observed total counts = 20.000000
[Thu May  2 15:48:11 2013] Offset between fit and detection position for source 18 = 0.359239 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.359239 pixels
  Position = (645.3, 654.8) = 20 35 8.30 -59 38 21.5
  Extent = 0.9 (0.6-1.2)", rotation angle = 0
  Source counts = 16.2 +/- 4.0
  Background counts = 0.0
  Rate = 0.0003 +/- 7e-05
[Thu May  2 15:48:11 2013] Vigneting correction estimate = 1.000000
[Thu May  2 15:48:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 15:48:11 2013] Assessing source extent using major axis lower bound
[Thu May  2 15:48:11 2013] Source does appear to be extended
[Thu May  2 15:48:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 16:02:53 2013] Writing source region out to fullrun_ccd2_acisf12182_pi14-548_pass1_cl_src18_src.reg
[Thu May  2 16:02:53 2013] Extracting stamp from image fullrun_ccd2_acisf12182_pi14-548_cl_sm2.00.img.gz, (603, 613) - (687, 697)
[Thu May  2 16:02:53 2013] Writing fullrun_ccd2_acisf12182_pi14-548_pass1_cl_src18.gif
[Thu May  2 16:09:59 2013] Size of ../../acisf12182/products/events/fullrun_ccd2_acisf12182_pi14-548_pass1_cl_src18_src.evt.gz[events] = 19 counts
[Thu May  2 16:09:59 2013] Mean chipx,y = (498.42, 478.21)
[Thu May  2 16:09:59 2013] Mean tdetx,y = (3539.21, 3587.58)
[Thu May  2 16:09:59 2013] chipx,y range = (480.00-518.00, 464.00-496.00)
[Thu May  2 16:09:59 2013] Size of ../../acisf12182/products/events/fullrun_ccd2_acisf12182_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 25 counts
[Thu May  2 16:10:00 2013] Not generating rmf since there are only 16 counts
[Thu May  2 16:10:00 2013] arf not found, will run specextract
[Thu May  2 16:10:26 2013] ../../acisf12182/products/spectra/fullrun_ccd2_acisf12182_pi14-548_pass1_cl_src18.warf not found
[Thu May  2 16:10:26 2013] ../../acisf12182/products/spectra/fullrun_ccd2_acisf12182_pi14-548_pass1_cl_src18.wrmf not found
[Thu May  2 16:10:26 2013] Removal of ../../acisf12182/products/spectra/fullrun_ccd2_acisf12182_pi14-548_pass1_cl_src18.soff failed
[Thu May  2 16:19:14 2013] Spectrum 18 has only 16 counts, deleting rmf
[Thu May  2 16:19:14 2013] 164.908
[Thu May  2 16:43:11 2013] Updating aperture counts using extracted products
[Thu May  2 16:43:11 2013] Total counts from fullrun_ccd2_acisf12182_pi14-548_pass1_cl_src18_src.pi.gz = 19.00
[Thu May  2 16:43:11 2013] Total counts from fullrun_ccd2_acisf12182_pi14-548_pass1_cl_src18_bgd.pi.gz = 25.00
[Thu May  2 16:43:11 2013] Got source and background scale factors 0.000003, 0.000031
[Thu May  2 16:43:11 2013] User source parameters:
  Position = (645.3, 654.8) = 20 35 8.30 -59 38 21.5
  Extent = 0.9 (0.6-1.2)", rotation angle = 0
  Source aperture counts = 16.9 +/- 5.4
  Background aperture counts = 2.1
  Rate = 0.0003 +/- 9e-05

[Thu May  2 16:43:13 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 16:43:13 2013] Using photon index=1.80, rate=0.000276, arf fullrun_ccd2_acisf12182_pi14-548_pass1_cl_src18.arf
[Thu May  2 16:43:13 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu May  2 16:43:13 2013] Updating source flux to 3.8e-15
[Thu May  2 16:43:37 2013] Source 18 has fewer than 100.000000 counts, skipping spectral fitting