[Fri Oct  7 12:38:20 2011] Detection parameters:
  Position = (499.0, 815.2) = 3 24 53.97 -62 28 9.3
  Extent = 1.6" x 0.9", rotation angle = 147 degrees
  Source counts = 26.9 +/- 5.4
  Background counts = 2.1
  Rate = 0.001 +/- 0.0003

[Fri Oct  7 12:38:20 2011] Off-axis axis estimate = 6.03'
[Fri Oct  7 13:03:02 2011] Using EEF radius (= 1.64 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 13:03:02 2011] Initial guess for spatial extent in simple fitting = 1.64"
[Fri Oct  7 13:03:02 2011] source mask rpix=3.3, npix_max = 58, mask sum = 64, frac = 1.085
[Fri Oct  7 13:03:02 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.64"
[Fri Oct  7 13:11:02 2011] fullrun_ccd2_acisf12181_pi14-548_cl_pass0_src3.ximg exists
[Fri Oct  7 13:11:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12181_pi14-548_cl_pass0_src3.csv
[Fri Oct  7 13:11:02 2011] fullrun_ccd2_acisf12181_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Oct  7 13:11:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12181_pi14-548_cl_pass0_src3.csv
[Fri Oct  7 13:11:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12181_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12181_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 13:11:02 2011] fullrun_ccd2_acisf12181_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Oct  7 13:11:02 2011] fullrun_ccd2_acisf12181_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Oct  7 13:11:02 2011] Fit fullrun_ccd2_acisf12181_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Oct  7 13:24:12 2011] Spatial fit model total counts = 28.451600, observed total counts = 29.000000
[Fri Oct  7 13:24:12 2011] Offset between fit and detection position for source 6 = 1.035060 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 1.035060 pixels
  Position = (500.1, 815.2) = 3 24 53.93 -62 28 9.5
  Extent = 1.7 (1.3-2.0)", rotation angle = 0
  Source counts = 28.3 +/- 5.3
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Fri Oct  7 13:24:12 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 13:24:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 13:24:12 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 13:24:12 2011] Source does appear to be extended
[Fri Oct  7 13:24:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 13:43:20 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 13:43:20 2011] Initial guess for spatial extent in simple fitting = 1.71"
[Fri Oct  7 13:43:20 2011] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.009
[Fri Oct  7 13:43:20 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.71"
[Fri Oct  7 13:51:11 2011] fullrun_ccd2_acisf12181_pi14-548_cl_pass1_src3.ximg exists
[Fri Oct  7 13:51:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12181_pi14-548_cl_pass1_src3.csv
[Fri Oct  7 13:51:11 2011] fullrun_ccd2_acisf12181_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Oct  7 13:51:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12181_pi14-548_cl_pass1_src3.csv
[Fri Oct  7 13:51:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12181_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12181_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 13:51:11 2011] fullrun_ccd2_acisf12181_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Oct  7 13:51:11 2011] fullrun_ccd2_acisf12181_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Oct  7 13:51:11 2011] Fit fullrun_ccd2_acisf12181_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Oct  7 14:05:27 2011] Spatial fit model total counts = 28.785300, observed total counts = 29.000000
[Fri Oct  7 14:05:27 2011] Offset between fit and detection position for source 6 = 0.072553 pixels
[Fri Oct  7 14:05:27 2011] 28.589245 total counts/ 0.089345 bgd. counts: snr = 95.347258
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.072553 pixels
  Position = (500.1, 815.3) = 3 24 53.93 -62 28 9.5
  Extent = 1.6 (1.3-2.0)", rotation angle = 0
  Source counts = 28.5 +/- 5.3
  Background counts = 0.1
  Rate = 0.001 +/- 0.0003
[Fri Oct  7 14:05:27 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 14:05:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 14:05:27 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 14:05:27 2011] Source does appear to be extended
[Fri Oct  7 14:05:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 14:15:37 2011] Writing source region out to fullrun_ccd2_acisf12181_pi14-548_pass1_cl_src6_src.reg
[Fri Oct  7 14:15:37 2011] Extracting stamp from image fullrun_ccd2_acisf12181_pi14-548_cl_sm2.00.img.gz, (426, 741) - (575, 890)
[Fri Oct  7 14:15:37 2011] Writing fullrun_ccd2_acisf12181_pi14-548_pass1_cl_src6.gif
[Fri Oct  7 14:16:53 2011] Size of ../../acisf12181/products/events/fullrun_ccd2_acisf12181_pi14-548_pass1_cl_src6_src.evt.gz[events] = 30 counts
[Fri Oct  7 14:16:53 2011] Mean chipx,y = (388.20, 310.83)
[Fri Oct  7 14:16:53 2011] Mean tdetx,y = (3371.83, 3697.80)
[Fri Oct  7 14:16:53 2011] chipx,y range = (367.00-408.00, 290.00-328.00)
[Fri Oct  7 14:16:53 2011] Size of ../../acisf12181/products/events/fullrun_ccd2_acisf12181_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 25 counts
[Fri Oct  7 14:16:54 2011] Not generating rmf since there are only 28 counts
[Fri Oct  7 14:16:54 2011] arf not found, will run specextract
[Fri Oct  7 14:17:17 2011] ../../acisf12181/products/spectra/fullrun_ccd2_acisf12181_pi14-548_pass1_cl_src6.warf not found
[Fri Oct  7 14:17:17 2011] ../../acisf12181/products/spectra/fullrun_ccd2_acisf12181_pi14-548_pass1_cl_src6.wrmf not found
[Fri Oct  7 14:17:17 2011] Removal of ../../acisf12181/products/spectra/fullrun_ccd2_acisf12181_pi14-548_pass1_cl_src6.soff failed
[Fri Oct  7 14:22:29 2011] Spectrum 6 has only 28 counts, deleting rmf
[Fri Oct  7 14:22:29 2011] 178.511
[Fri Oct  7 14:36:55 2011] Updating aperture counts using extracted products
[Fri Oct  7 14:36:55 2011] Error reading totcts from fullrun_ccd2_acisf12181_pi14-548_pass1_cl_src6_src.pi.gz
[Fri Oct  7 14:36:55 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 14:36:55 2011] Using photon index=1.80, rate=0.00146, arf fullrun_ccd2_acisf12181_pi14-548_pass1_cl_src6.arf
[Fri Oct  7 14:36:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 14:36:55 2011] Updating source flux to 1.9e-14
[Fri Oct  7 14:37:05 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct  7 14:37:06 2011] acisf12181/analysis//spectral/fullrun_ccd2_acisf12181_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete