[Mon Nov 28 06:58:37 2011] Detection parameters:
  Position = (723.8, 507.4) = 21 5 57.79 -58 44 0.8
  Extent = 0.6" x 0.5", rotation angle = 81 degrees
  Source counts = 13.2 +/- 3.7
  Background counts = 0.8
  Rate = 0.0005 +/- 0.0002

[Mon Nov 28 06:58:37 2011] Off-axis axis estimate = 4.05'
[Mon Nov 28 07:28:36 2011] Using EEF radius (= 0.84 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 07:28:36 2011] Initial guess for spatial extent in simple fitting = 0.84"
[Mon Nov 28 07:28:36 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.017
[Mon Nov 28 07:28:36 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 0.84"
[Mon Nov 28 07:46:14 2011] fullrun_ccd3_acisf12180_pi14-548_cl_pass0_src9.ximg exists
[Mon Nov 28 07:46:14 2011] fullrun_ccd3_acisf12180_pi14-548_cl_pass0_src9_1.ximg exists
[Mon Nov 28 07:46:14 2011] Fit fullrun_ccd3_acisf12180_pi14-548_cl_pass0_src9 appears to have run properly
[Mon Nov 28 07:46:14 2011] fullrun_ccd3_acisf12180_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Mon Nov 28 07:46:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12180_pi14-548_cl_pass0_tfrozen_src9.csv
[Mon Nov 28 07:46:14 2011] fullrun_ccd3_acisf12180_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Mon Nov 28 07:46:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12180_pi14-548_cl_pass0_tfrozen_src9.csv
[Mon Nov 28 07:46:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12180_pi14-548_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12180_pi14-548_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 08:27:07 2011] Spatial fit model total counts = 13.792000, observed total counts = 15.000000
[Mon Nov 28 08:27:07 2011] Offset between fit and detection position for source 6 = 0.674471 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.674471 pixels
  Position = (724.3, 507.9) = 21 5 57.79 -58 44 0.9
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 13.8 +/- 3.7
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Mon Nov 28 08:27:07 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 08:27:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 08:27:07 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 08:27:07 2011] Source does appear to be extended
[Mon Nov 28 08:27:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 08:51:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Nov 28 08:51:29 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Mon Nov 28 08:51:29 2011] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.064
[Mon Nov 28 08:51:29 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.71"
[Mon Nov 28 09:02:16 2011] fullrun_ccd3_acisf12180_pi14-548_cl_pass1_src9.ximg exists
[Mon Nov 28 09:02:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12180_pi14-548_cl_pass1_src9.csv
[Mon Nov 28 09:02:16 2011] fullrun_ccd3_acisf12180_pi14-548_cl_pass1_src9_1.ximg exists
[Mon Nov 28 09:02:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12180_pi14-548_cl_pass1_src9.csv
[Mon Nov 28 09:02:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12180_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12180_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 09:02:16 2011] fullrun_ccd3_acisf12180_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Mon Nov 28 09:02:16 2011] fullrun_ccd3_acisf12180_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Mon Nov 28 09:02:16 2011] Fit fullrun_ccd3_acisf12180_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Mon Nov 28 09:18:30 2011] Spatial fit model total counts = 14.149800, observed total counts = 15.000000
[Mon Nov 28 09:18:30 2011] Offset between fit and detection position for source 6 = 0.323591 pixels
[Mon Nov 28 09:18:30 2011] 13.721946 total counts/ 0.664846 bgd. counts: snr = 16.013498
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.323591 pixels
  Position = (724.4, 508.2) = 21 5 57.79 -58 44 0.7
  Extent = 0.6 (0.5-0.9)", rotation angle = 0
  Source counts = 13.1 +/- 3.7
  Background counts = 0.7
  Rate = 0.0005 +/- 0.0001
[Mon Nov 28 09:18:30 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 09:18:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 09:18:30 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 09:18:30 2011] Source does appear to be extended
[Mon Nov 28 09:18:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 09:32:36 2011] Writing source region out to fullrun_ccd3_acisf12180_pi14-548_pass1_cl_src6_src.reg
[Mon Nov 28 09:32:36 2011] Extracting stamp from image fullrun_ccd3_acisf12180_pi14-548_cl_sm2.00.img.gz, (698, 482) - (751, 535)
[Mon Nov 28 09:32:36 2011] Writing fullrun_ccd3_acisf12180_pi14-548_pass1_cl_src6.gif
[Mon Nov 28 09:37:20 2011] Size of ../../acisf12180/products/events/fullrun_ccd3_acisf12180_pi14-548_pass1_cl_src6_src.evt.gz[events] = 14 counts
[Mon Nov 28 09:37:20 2011] Mean chipx,y = (697.71, 536.79)
[Mon Nov 28 09:37:20 2011] Mean tdetx,y = (4595.21, 3758.71)
[Mon Nov 28 09:37:20 2011] chipx,y range = (680.00-711.00, 523.00-557.00)
[Mon Nov 28 09:37:20 2011] Size of ../../acisf12180/products/events/fullrun_ccd3_acisf12180_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 7 counts
[Mon Nov 28 09:37:21 2011] Not generating rmf since there are only 13 counts
[Mon Nov 28 09:37:21 2011] arf not found, will run specextract
[Mon Nov 28 09:37:45 2011] ../../acisf12180/products/spectra/fullrun_ccd3_acisf12180_pi14-548_pass1_cl_src6.warf not found
[Mon Nov 28 09:37:45 2011] ../../acisf12180/products/spectra/fullrun_ccd3_acisf12180_pi14-548_pass1_cl_src6.wrmf not found
[Mon Nov 28 09:37:45 2011] Removal of ../../acisf12180/products/spectra/fullrun_ccd3_acisf12180_pi14-548_pass1_cl_src6.soff failed
[Mon Nov 28 09:41:59 2011] Spectrum 6 has only 13 counts, deleting rmf
[Mon Nov 28 09:41:59 2011] 194.423
[Mon Nov 28 09:44:01 2011] Updating aperture counts using extracted products
[Mon Nov 28 09:44:01 2011] Error reading totcts from fullrun_ccd3_acisf12180_pi14-548_pass1_cl_src6_src.pi.gz
[Mon Nov 28 09:44:01 2011] Calculating source flux in energy range 0.30-8.00
[Mon Nov 28 09:44:01 2011] Using photon index=1.80, rate=0.000528, arf fullrun_ccd3_acisf12180_pi14-548_pass1_cl_src6.arf
[Mon Nov 28 09:44:01 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Nov 28 09:44:01 2011] Updating source flux to 6.3e-15
[Mon Nov 28 09:44:09 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting