[Mon Nov 28 06:57:28 2011] Detection parameters:
  Position = (897.0, 854.8) = 21 4 45.25 -58 50 13.1
  Extent = 4.2" x 3.4", rotation angle = 149 degrees
  Source counts = 108.9 +/- 11.8
  Background counts = 30.1
  Rate = 0.004 +/- 0.0005

[Mon Nov 28 06:57:28 2011] Off-axis axis estimate = 10.46'
[Mon Nov 28 07:00:27 2011] Using EEF radius (= 4.85 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 07:00:27 2011] Initial guess for spatial extent in simple fitting = 4.85"
[Mon Nov 28 07:00:27 2011] source mask rpix=9.9, npix_max = 429, mask sum = 420, frac = 0.978
[Mon Nov 28 07:00:27 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 4.85"
[Mon Nov 28 07:15:56 2011] fullrun_ccd0_acisf12180_pi14-548_cl_pass0_src2.ximg exists
[Mon Nov 28 07:15:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12180_pi14-548_cl_pass0_src2.csv
[Mon Nov 28 07:15:56 2011] fullrun_ccd0_acisf12180_pi14-548_cl_pass0_src2_1.ximg exists
[Mon Nov 28 07:15:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12180_pi14-548_cl_pass0_src2.csv
[Mon Nov 28 07:15:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12180_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12180_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 07:15:56 2011] fullrun_ccd0_acisf12180_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Mon Nov 28 07:15:56 2011] fullrun_ccd0_acisf12180_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Nov 28 07:15:56 2011] Fit fullrun_ccd0_acisf12180_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Mon Nov 28 08:27:04 2011] Spatial fit model total counts = 155.130000, observed total counts = 154.000000
[Mon Nov 28 08:27:04 2011] Offset between fit and detection position for source 2 = 3.815164 pixels
[Mon Nov 28 08:27:04 2011] 155.085500 total counts/ 11.133500 bgd. counts: snr = 43.142156
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 3.815164 pixels
  Position = (900.8, 854.8) = 21 4 45.04 -58 50 13.3
  Extent = 5.3 (4.4-6.2)", rotation angle = 0
  Source counts = 144.0 +/- 12.5
  Background counts = 11.1
  Rate = 0.006 +/- 0.0005
[Mon Nov 28 08:27:04 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 08:27:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 08:27:04 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 08:27:04 2011] Source does appear to be extended
[Mon Nov 28 08:27:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 08:27:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Nov 28 08:27:19 2011] Initial guess for spatial extent in simple fitting = 5.29"
[Mon Nov 28 08:27:19 2011] source mask rpix=10.8, npix_max = 506, mask sum = 484, frac = 0.955
[Mon Nov 28 08:27:19 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 5.29"
[Mon Nov 28 08:40:04 2011] fullrun_ccd0_acisf12180_pi14-548_cl_pass1_src2.ximg exists
[Mon Nov 28 08:40:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12180_pi14-548_cl_pass1_src2.csv
[Mon Nov 28 08:40:04 2011] fullrun_ccd0_acisf12180_pi14-548_cl_pass1_src2_1.ximg exists
[Mon Nov 28 08:40:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12180_pi14-548_cl_pass1_src2.csv
[Mon Nov 28 08:40:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12180_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12180_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 08:40:04 2011] fullrun_ccd0_acisf12180_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Mon Nov 28 08:40:04 2011] fullrun_ccd0_acisf12180_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Nov 28 08:40:04 2011] Fit fullrun_ccd0_acisf12180_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Mon Nov 28 09:18:27 2011] Warning, spatial fit 2 centroid is now closest to src. 1
[Mon Nov 28 09:18:27 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 09:18:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 09:18:27 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 09:18:27 2011] Source does appear to be extended
[Mon Nov 28 09:18:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 09:18:42 2011] Writing source region out to fullrun_ccd0_acisf12180_pi14-548_pass1_cl_src2_src.reg
[Mon Nov 28 09:18:42 2011] Extracting stamp from image fullrun_ccd0_acisf12180_pi14-548_cl_sm2.00.img.gz, (659, 613) - (1095, 1095)
[Mon Nov 28 09:18:42 2011] Writing fullrun_ccd0_acisf12180_pi14-548_pass1_cl_src2.gif
[Mon Nov 28 09:19:13 2011] Size of ../../acisf12180/products/events/fullrun_ccd0_acisf12180_pi14-548_pass1_cl_src2_src.evt.gz[events] = 170 counts
[Mon Nov 28 09:19:13 2011] Mean chipx,y = (182.19, 837.44)
[Mon Nov 28 09:19:13 2011] Mean tdetx,y = (3898.44, 4949.81)
[Mon Nov 28 09:19:13 2011] chipx,y range = (141.00-232.00, 797.00-884.00)
[Mon Nov 28 09:19:13 2011] Size of ../../acisf12180/products/events/fullrun_ccd0_acisf12180_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 424 counts
[Mon Nov 28 09:19:14 2011] rmf not found, will run specextract
[Mon Nov 28 09:19:14 2011] arf not found, will run specextract
[Mon Nov 28 09:19:39 2011] ../../acisf12180/products/spectra/fullrun_ccd0_acisf12180_pi14-548_pass1_cl_src2.warf not found
[Mon Nov 28 09:19:39 2011] ../../acisf12180/products/spectra/fullrun_ccd0_acisf12180_pi14-548_pass1_cl_src2.wrmf not found
[Mon Nov 28 09:19:39 2011] Removal of ../../acisf12180/products/spectra/fullrun_ccd0_acisf12180_pi14-548_pass1_cl_src2.soff failed
[Mon Nov 28 09:22:19 2011] Keeping rmf generated by specextract
[Mon Nov 28 09:22:19 2011] 156.657
[Mon Nov 28 09:44:01 2011] Updating aperture counts using extracted products
[Mon Nov 28 09:44:01 2011] Error reading totcts from fullrun_ccd0_acisf12180_pi14-548_pass1_cl_src2_src.pi.gz
[Mon Nov 28 09:44:01 2011] Calculating source flux in energy range 0.30-8.00
[Mon Nov 28 09:44:01 2011] Using photon index=1.80, rate=0.00582, arf fullrun_ccd0_acisf12180_pi14-548_pass1_cl_src2.arf
[Mon Nov 28 09:44:01 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Nov 28 09:44:01 2011] Updating source flux to 8.4e-14
[Mon Nov 28 09:44:07 2011] Reading fit data from acisf12180/analysis//spectral/fullrun_ccd0_acisf12180_pi14-548_pass1_cl_src2_pl.csv
[Mon Nov 28 09:44:07 2011] Spectral fit parameter nH value = 3.27734e+20
[Mon Nov 28 09:44:07 2011] Spectral fit parameter PhoIndex value = 2.09682
[Mon Nov 28 09:44:07 2011] Failed to get F(0.3-8.0) from acisf12180/analysis//spectral/fullrun_ccd0_acisf12180_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon Nov 28 09:44:07 2011] Calculating source flux in energy range 0.30-8.00
[Mon Nov 28 09:44:07 2011] Using Nh = 3.3e+20, photon index=2.10, rate=0.00582, arf fullrun_ccd0_acisf12180_pi14-548_pass1_cl_src2.arf
[Mon Nov 28 09:44:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Nov 28 09:44:07 2011] Updating source flux to 8.2e-14