[Sat Oct 22 11:46:28 2011] Detection parameters:
  Position = (246.0, 118.0) = 1 1 49.52 -22 2 32.2
  Extent = 0.8" x 0.6", rotation angle = 37 degrees
  Source counts = 13.5 +/- 3.9
  Background counts = 1.5
  Rate = 0.0003 +/- 8e-05

[Sat Oct 22 11:46:28 2011] Off-axis axis estimate = 0.91'
[Sat Oct 22 12:35:26 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 12:35:26 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sat Oct 22 12:35:26 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.617
[Sat Oct 22 12:35:26 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 0.38"
[Sat Oct 22 12:50:23 2011] fullrun_ccd2_acisf12177_pi14-548_cl_pass0_src8.ximg exists
[Sat Oct 22 12:50:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12177_pi14-548_cl_pass0_src8.csv
[Sat Oct 22 12:50:23 2011] fullrun_ccd2_acisf12177_pi14-548_cl_pass0_src8_1.ximg exists
[Sat Oct 22 12:50:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12177_pi14-548_cl_pass0_src8.csv
[Sat Oct 22 12:50:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12177_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12177_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 12:50:23 2011] fullrun_ccd2_acisf12177_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Sat Oct 22 12:50:23 2011] fullrun_ccd2_acisf12177_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Sat Oct 22 12:50:23 2011] Fit fullrun_ccd2_acisf12177_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly
[Sat Oct 22 13:16:15 2011] Spatial fit model total counts = 15.765000, observed total counts = 16.000000
[Sat Oct 22 13:16:15 2011] Offset between fit and detection position for source 10 = 0.591793 pixels
[Sat Oct 22 13:16:15 2011] 15.852140 total counts/ 3.858040 bgd. counts: snr = 6.106387
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.591793 pixels
  Position = (246.2, 118.5) = 1 1 49.53 -22 2 32.1
  Extent = 0.6 (0.4-1.0)", rotation angle = 0
  Source counts = 12.0 +/- 4.0
  Background counts = 3.9
  Rate = 0.0002 +/- 8e-05
[Sat Oct 22 13:16:15 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 13:16:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 13:16:15 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 13:16:15 2011] Source does appear to be extended
[Sat Oct 22 13:16:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 13:57:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 13:57:09 2011] Initial guess for spatial extent in simple fitting = 0.63"
[Sat Oct 22 13:57:09 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.943
[Sat Oct 22 13:57:09 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 0.63"
[Sat Oct 22 14:11:23 2011] fullrun_ccd2_acisf12177_pi14-548_cl_pass1_src8.ximg exists
[Sat Oct 22 14:11:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12177_pi14-548_cl_pass1_src8.csv
[Sat Oct 22 14:11:23 2011] fullrun_ccd2_acisf12177_pi14-548_cl_pass1_src8_1.ximg exists
[Sat Oct 22 14:11:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12177_pi14-548_cl_pass1_src8.csv
[Sat Oct 22 14:11:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12177_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12177_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 14:11:23 2011] fullrun_ccd2_acisf12177_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Sat Oct 22 14:11:23 2011] fullrun_ccd2_acisf12177_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Sat Oct 22 14:11:23 2011] Fit fullrun_ccd2_acisf12177_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly
[Sat Oct 22 14:33:54 2011] Spatial fit model total counts = 15.555500, observed total counts = 16.000000
[Sat Oct 22 14:33:54 2011] Offset between fit and detection position for source 10 = 0.079583 pixels
[Sat Oct 22 14:33:54 2011] 15.658170 total counts/ 3.688370 bgd. counts: snr = 6.232606
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.079583 pixels
  Position = (246.2, 118.5) = 1 1 49.53 -22 2 32.2
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 12.0 +/- 4.0
  Background counts = 3.7
  Rate = 0.0002 +/- 8e-05
[Sat Oct 22 14:33:54 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 14:33:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 14:33:54 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 14:33:54 2011] Source does appear to be extended
[Sat Oct 22 14:33:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 14:50:37 2011] Writing source region out to fullrun_ccd2_acisf12177_pi14-548_pass1_cl_src10_src.reg
[Sat Oct 22 14:50:37 2011] Extracting stamp from image fullrun_ccd2_acisf12177_pi14-548_cl_sm2.00.img.gz, (216, 89) - (276, 148)
[Sat Oct 22 14:50:37 2011] Writing fullrun_ccd2_acisf12177_pi14-548_pass1_cl_src10.gif
[Sat Oct 22 14:54:27 2011] Size of ../../acisf12177/products/events/fullrun_ccd2_acisf12177_pi14-548_pass1_cl_src10_src.evt.gz[events] = 14 counts
[Sat Oct 22 14:54:27 2011] Mean chipx,y = (80.79, 926.64)
[Sat Oct 22 14:54:27 2011] Mean tdetx,y = (3987.64, 4005.21)
[Sat Oct 22 14:54:27 2011] chipx,y range = (67.00-105.00, 911.00-946.00)
[Sat Oct 22 14:54:27 2011] Size of ../../acisf12177/products/events/fullrun_ccd2_acisf12177_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 23 counts
[Sat Oct 22 14:54:28 2011] Not generating rmf since there are only 11 counts
[Sat Oct 22 14:54:28 2011] arf not found, will run specextract
[Sat Oct 22 14:54:56 2011] ../../acisf12177/products/spectra/fullrun_ccd2_acisf12177_pi14-548_pass1_cl_src10.warf not found
[Sat Oct 22 14:54:56 2011] ../../acisf12177/products/spectra/fullrun_ccd2_acisf12177_pi14-548_pass1_cl_src10.wrmf not found
[Sat Oct 22 14:54:56 2011] Removal of ../../acisf12177/products/spectra/fullrun_ccd2_acisf12177_pi14-548_pass1_cl_src10.soff failed
[Sat Oct 22 14:55:36 2011] Spectrum 10 has only 12 counts, deleting rmf
[Sat Oct 22 14:55:36 2011] 201.749
[Sat Oct 22 15:11:30 2011] Updating aperture counts using extracted products
[Sat Oct 22 15:11:30 2011] Error reading totcts from fullrun_ccd2_acisf12177_pi14-548_pass1_cl_src10_src.pi.gz
[Sat Oct 22 15:11:31 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 15:11:31 2011] Using photon index=1.80, rate=0.000239, arf fullrun_ccd2_acisf12177_pi14-548_pass1_cl_src10.arf
[Sat Oct 22 15:11:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 15:11:31 2011] Updating source flux to 2.8e-15
[Sat Oct 22 15:11:46 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct 22 15:11:47 2011] acisf12177/analysis//spectral/fullrun_ccd2_acisf12177_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete