[Mon May 20 00:26:42 2013] Detection parameters:
  Position = (924.0, 1026.7) = 13 20 30.27 -21 45 37.8
  Extent = 0.7" x 0.5", rotation angle = 116 degrees
  Source counts = 11.9 +/- 3.5
  Background counts = 0.1
  Rate = 0.001 +/- 0.0003

[Mon May 20 00:26:42 2013] Off-axis axis estimate = 5.50'
[Mon May 20 00:39:51 2013] Using EEF radius (= 1.39 ")to estimate initial spatial extent for simple fitting
[Mon May 20 00:39:51 2013] Initial guess for spatial extent in simple fitting = 1.39"
[Mon May 20 00:39:51 2013] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.949
[Mon May 20 00:39:51 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 1.39"
[Mon May 20 00:44:03 2013] fullrun_ccd3_acisf12173_pi14-548_cl_pass0_src4.ximg exists
[Mon May 20 00:44:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12173_pi14-548_cl_pass0_src4.csv
[Mon May 20 00:44:03 2013] fullrun_ccd3_acisf12173_pi14-548_cl_pass0_src4_1.ximg exists
[Mon May 20 00:44:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12173_pi14-548_cl_pass0_src4.csv
[Mon May 20 00:44:03 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12173_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12173_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 00:44:03 2013] fullrun_ccd3_acisf12173_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Mon May 20 00:44:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12173_pi14-548_cl_pass0_tfrozen_src4.csv
[Mon May 20 00:44:03 2013] fullrun_ccd3_acisf12173_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Mon May 20 00:44:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12173_pi14-548_cl_pass0_tfrozen_src4.csv
[Mon May 20 00:44:03 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12173_pi14-548_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12173_pi14-548_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 00:44:06 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.248154 pixels away
[Mon May 20 00:44:06 2013] Vigneting correction estimate = 1.000000
[Mon May 20 00:44:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 00:44:06 2013] Assessing source extent using major
[Mon May 20 00:44:06 2013] Source does appear to be extended
[Mon May 20 00:44:06 2013] Computing asymmetry using major and minor axis, asym = 1.43
[Mon May 20 00:44:06 2013] Deleting source due to low Poisson probability 0.9