[Tue Feb 28 04:47:15 2012] Detection parameters:
  Position = (670.6, 191.5) = 0 42 42.51 41 16 59.4
  Extent = 0.5" x 0.5", rotation angle = 83 degrees
  Source counts = 13.7 +/- 3.7
  Background counts = 0.3
  Rate = 0.003 +/- 0.0009

[Tue Feb 28 04:47:15 2012] Off-axis axis estimate = 1.30'
[Tue Feb 28 05:45:16 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Tue Feb 28 05:45:16 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Tue Feb 28 05:45:16 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.370
[Tue Feb 28 05:45:16 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 0.38"
[Tue Feb 28 06:29:21 2012] fullrun_ccd3_acisf12164_pi14-548_cl_pass0_src27.ximg exists
[Tue Feb 28 06:29:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12164_pi14-548_cl_pass0_src27.csv
[Tue Feb 28 06:29:21 2012] fullrun_ccd3_acisf12164_pi14-548_cl_pass0_src27_1.ximg exists
[Tue Feb 28 06:29:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12164_pi14-548_cl_pass0_src27.csv
[Tue Feb 28 06:29:21 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12164_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12164_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 28 06:29:21 2012] fullrun_ccd3_acisf12164_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Tue Feb 28 06:29:21 2012] fullrun_ccd3_acisf12164_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Tue Feb 28 06:29:21 2012] Fit fullrun_ccd3_acisf12164_pi14-548_cl_pass0_tfrozen_src27 appears to have run properly
[Tue Feb 28 06:42:30 2012] Spatial fit model total counts = 14.077900, observed total counts = 14.000000
[Tue Feb 28 06:42:30 2012] Offset between fit and detection position for source 28 = 0.711655 pixels
[Tue Feb 28 06:42:30 2012] 14.077936 total counts/ 0.002336 bgd. counts: snr = 291.198190
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.711655 pixels
  Position = (671.1, 192.0) = 0 42 42.52 41 16 59.4
  Extent = 0.3 (0.3-0.4)", rotation angle = 0
  Source counts = 14.1 +/- 3.8
  Background counts = 0.0
  Rate = 0.004 +/- 0.0009
[Tue Feb 28 06:42:30 2012] Vigneting correction estimate = 1.000000
[Tue Feb 28 06:42:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 28 06:42:30 2012] Assessing source extent using major axis lower bound
[Tue Feb 28 06:42:30 2012] Source does appear to be extended
[Tue Feb 28 06:42:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 28 07:30:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 28 07:30:39 2012] Initial guess for spatial extent in simple fitting = 0.33"
[Tue Feb 28 07:30:39 2012] source mask rpix=0.7, npix_max = 5, mask sum = 4, frac = 0.722
[Tue Feb 28 07:30:39 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 0.33"
[Tue Feb 28 08:05:41 2012] fullrun_ccd3_acisf12164_pi14-548_cl_pass1_src27.ximg exists
[Tue Feb 28 08:05:41 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12164_pi14-548_cl_pass1_src27.csv
[Tue Feb 28 08:05:41 2012] fullrun_ccd3_acisf12164_pi14-548_cl_pass1_src27_1.ximg exists
[Tue Feb 28 08:05:41 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12164_pi14-548_cl_pass1_src27.csv
[Tue Feb 28 08:05:41 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12164_pi14-548_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12164_pi14-548_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 28 08:05:41 2012] fullrun_ccd3_acisf12164_pi14-548_cl_pass1_tfrozen_src27.ximg exists
[Tue Feb 28 08:05:41 2012] fullrun_ccd3_acisf12164_pi14-548_cl_pass1_tfrozen_src27_1.ximg exists
[Tue Feb 28 08:05:41 2012] Fit fullrun_ccd3_acisf12164_pi14-548_cl_pass1_tfrozen_src27 appears to have run properly
[Tue Feb 28 08:18:13 2012] Spatial fit model total counts = 13.540000, observed total counts = 14.000000
[Tue Feb 28 08:18:13 2012] Offset between fit and detection position for source 28 = 0.071297 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.071297 pixels
  Position = (671.2, 192.0) = 0 42 42.51 41 16 59.4
  Extent = 0.3 (0.3-0.4)", rotation angle = 0
  Source counts = 13.5 +/- 3.7
  Background counts = 0.0
  Rate = 0.003 +/- 0.0009
[Tue Feb 28 08:18:13 2012] Vigneting correction estimate = 1.000000
[Tue Feb 28 08:18:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 28 08:18:13 2012] Assessing source extent using major axis lower bound
[Tue Feb 28 08:18:13 2012] Source does appear to be extended
[Tue Feb 28 08:18:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 28 08:46:09 2012] Writing source region out to fullrun_ccd3_acisf12164_pi14-548_pass1_cl_src28_src.reg
[Tue Feb 28 08:46:09 2012] Extracting stamp from image fullrun_ccd3_acisf12164_pi14-548_cl_sm2.00.img.gz, (656, 177) - (687, 207)
[Tue Feb 28 08:46:09 2012] Writing fullrun_ccd3_acisf12164_pi14-548_pass1_cl_src28.gif
[Tue Feb 28 09:02:20 2012] Size of ../../acisf12164/products/events/fullrun_ccd3_acisf12164_pi14-548_pass1_cl_src28_src.evt.gz[events] = 14 counts
[Tue Feb 28 09:02:20 2012] Mean chipx,y = (913.14, 868.43)
[Tue Feb 28 09:02:20 2012] Mean tdetx,y = (4263.57, 3974.14)
[Tue Feb 28 09:02:20 2012] chipx,y range = (902.00-932.00, 853.00-886.00)
[Tue Feb 28 09:02:20 2012] ../../acisf12164/products/events/fullrun_ccd3_acisf12164_pi14-548_pass1_cl_src28_bgd.evt.gz[events] does not have any counts, not extracting spectra.
[Tue Feb 28 09:05:01 2012] No arf file found
[Tue Feb 28 09:05:45 2012] Updating aperture counts using extracted products
[Tue Feb 28 09:05:45 2012] Error reading totcts from fullrun_ccd3_acisf12164_pi14-548_pass1_cl_src28_src.pi
[Tue Feb 28 09:05:45 2012] No arf file for this source, not re-computing flux
[Tue Feb 28 09:06:41 2012] Source 28 has fewer than 100.000000 counts, skipping spectral fitting