[Tue Feb 28 04:47:14 2012] Detection parameters:
  Position = (441.6, 425.8) = 0 42 52.51 41 18 54.6
  Extent = 0.5" x 0.5", rotation angle = 25 degrees
  Source counts = 315.8 +/- 17.8
  Background counts = 1.2
  Rate = 0.08 +/- 0.004

[Tue Feb 28 04:47:15 2012] Off-axis axis estimate = 3.14'
[Tue Feb 28 05:45:16 2012] Using EEF radius (= 0.61 ")to estimate initial spatial extent for simple fitting
[Tue Feb 28 05:45:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 28 05:45:16 2012] Initial guess for spatial extent in simple fitting = 0.61"
[Tue Feb 28 05:45:16 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.993
[Tue Feb 28 05:45:16 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.61"
[Tue Feb 28 06:29:21 2012] fullrun_ccd3_acisf12164_pi14-548_cl_pass0_src1.ximg exists
[Tue Feb 28 06:29:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12164_pi14-548_cl_pass0_src1.csv
[Tue Feb 28 06:29:21 2012] fullrun_ccd3_acisf12164_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Feb 28 06:29:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12164_pi14-548_cl_pass0_src1.csv
[Tue Feb 28 06:29:21 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12164_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12164_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 28 06:29:21 2012] fullrun_ccd3_acisf12164_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Feb 28 06:29:21 2012] fullrun_ccd3_acisf12164_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Feb 28 06:29:21 2012] Fit fullrun_ccd3_acisf12164_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Feb 28 06:42:30 2012] Spatial fit model total counts = 306.025000, observed total counts = 318.000000
[Tue Feb 28 06:42:30 2012] Offset between fit and detection position for source 1 = 0.665926 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.665926 pixels
  Position = (442.1, 426.3) = 0 42 52.52 41 18 54.6
  Extent = 0.6 (0.6-0.6)", rotation angle = 0
  Source counts = 309.4 +/- 17.6
  Background counts = 0.0
  Rate = 0.08 +/- 0.004
[Tue Feb 28 06:42:30 2012] Vigneting correction estimate = 1.000000
[Tue Feb 28 06:42:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 28 06:42:30 2012] Assessing source extent using major axis lower bound
[Tue Feb 28 06:42:30 2012] Source does appear to be extended
[Tue Feb 28 06:42:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 28 07:30:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 28 07:30:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 28 07:30:39 2012] Initial guess for spatial extent in simple fitting = 0.61"
[Tue Feb 28 07:30:39 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.985
[Tue Feb 28 07:30:39 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.61"
[Tue Feb 28 08:05:40 2012] fullrun_ccd3_acisf12164_pi14-548_cl_pass1_src1.ximg exists
[Tue Feb 28 08:05:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12164_pi14-548_cl_pass1_src1.csv
[Tue Feb 28 08:05:40 2012] fullrun_ccd3_acisf12164_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Feb 28 08:05:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12164_pi14-548_cl_pass1_src1.csv
[Tue Feb 28 08:05:40 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12164_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12164_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 28 08:05:41 2012] fullrun_ccd3_acisf12164_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Feb 28 08:05:41 2012] fullrun_ccd3_acisf12164_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Feb 28 08:05:41 2012] Fit fullrun_ccd3_acisf12164_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Feb 28 08:18:13 2012] Spatial fit model total counts = 309.913000, observed total counts = 317.000000
[Tue Feb 28 08:18:13 2012] Offset between fit and detection position for source 1 = 0.028138 pixels
[Tue Feb 28 08:18:13 2012] 311.760540 total counts/ 2.015540 bgd. counts: snr = 218.176813
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.028138 pixels
  Position = (442.1, 426.3) = 0 42 52.51 41 18 54.6
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 309.7 +/- 17.7
  Background counts = 2.0
  Rate = 0.08 +/- 0.004
[Tue Feb 28 08:18:13 2012] Vigneting correction estimate = 1.000000
[Tue Feb 28 08:18:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 28 08:18:13 2012] Assessing source extent using major axis lower bound
[Tue Feb 28 08:18:13 2012] Source does appear to be extended
[Tue Feb 28 08:18:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 28 08:46:08 2012] Writing source region out to fullrun_ccd3_acisf12164_pi14-548_pass1_cl_src1_src.reg
[Tue Feb 28 08:46:08 2012] Extracting stamp from image fullrun_ccd3_acisf12164_pi14-548_cl_sm2.00.img.gz, (414, 398) - (471, 455)
[Tue Feb 28 08:46:08 2012] Writing fullrun_ccd3_acisf12164_pi14-548_pass1_cl_src1.gif
[Tue Feb 28 08:46:10 2012] Size of ../../acisf12164/products/events/fullrun_ccd3_acisf12164_pi14-548_pass1_cl_src1_src.evt.gz[events] = 313 counts
[Tue Feb 28 08:46:10 2012] Mean chipx,y = (589.25, 894.85)
[Tue Feb 28 08:46:10 2012] Mean tdetx,y = (4237.15, 3650.25)
[Tue Feb 28 08:46:10 2012] chipx,y range = (571.00-607.00, 875.00-914.00)
[Tue Feb 28 08:46:10 2012] Size of ../../acisf12164/products/events/fullrun_ccd3_acisf12164_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 5 counts
[Tue Feb 28 08:46:11 2012] rmf not found, will run specextract
[Tue Feb 28 08:46:11 2012] arf not found, will run specextract
[Tue Feb 28 08:46:39 2012] ../../acisf12164/products/spectra/fullrun_ccd3_acisf12164_pi14-548_pass1_cl_src1.warf not found
[Tue Feb 28 08:46:39 2012] ../../acisf12164/products/spectra/fullrun_ccd3_acisf12164_pi14-548_pass1_cl_src1.wrmf not found
[Tue Feb 28 08:46:39 2012] Removal of ../../acisf12164/products/spectra/fullrun_ccd3_acisf12164_pi14-548_pass1_cl_src1.soff failed
[Tue Feb 28 09:05:01 2012] Keeping rmf generated by specextract
[Tue Feb 28 09:05:01 2012] 189.976
[Tue Feb 28 09:05:44 2012] Updating aperture counts using extracted products
[Tue Feb 28 09:05:45 2012] Error reading totcts from fullrun_ccd3_acisf12164_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Feb 28 09:05:45 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 28 09:05:45 2012] Using photon index=1.80, rate=0.0781, arf fullrun_ccd3_acisf12164_pi14-548_pass1_cl_src1.arf
[Tue Feb 28 09:05:45 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 28 09:05:45 2012] Updating source flux to 9.2e-13
[Tue Feb 28 09:07:00 2012] Reading fit data from acisf12164/analysis//spectral/fullrun_ccd3_acisf12164_pi14-548_pass1_cl_src1_pl.csv
[Tue Feb 28 09:07:00 2012] Spectral fit parameter nH value = 2.49083e+21
[Tue Feb 28 09:07:00 2012] Spectral fit parameter PhoIndex value = 1.45149
[Tue Feb 28 09:07:00 2012] Failed to get F(0.3-8.0) from acisf12164/analysis//spectral/fullrun_ccd3_acisf12164_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Feb 28 09:07:00 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 28 09:07:00 2012] Using Nh = 2.5e+21, photon index=1.45, rate=0.0781, arf fullrun_ccd3_acisf12164_pi14-548_pass1_cl_src1.arf
[Tue Feb 28 09:07:00 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 28 09:07:00 2012] Updating source flux to 1.1e-12