[Tue Feb 28 04:46:02 2012] Detection parameters:
  Position = (706.6, 1151.9) = 0 42 13.13 41 18 36.7
  Extent = 1.3" x 0.9", rotation angle = 162 degrees
  Source counts = 257.3 +/- 16.2
  Background counts = 6.7
  Rate = 0.06 +/- 0.004

[Tue Feb 28 04:46:03 2012] Off-axis axis estimate = 6.85'
[Tue Feb 28 04:55:46 2012] Using EEF radius (= 2.09 ")to estimate initial spatial extent for simple fitting
[Tue Feb 28 04:55:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 28 04:55:46 2012] Initial guess for spatial extent in simple fitting = 2.09"
[Tue Feb 28 04:55:46 2012] source mask rpix=4.3, npix_max = 90, mask sum = 90, frac = 0.995
[Tue Feb 28 04:55:46 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 2.09"
[Tue Feb 28 05:22:55 2012] fullrun_ccd1_acisf12164_pi14-548_cl_pass0_src3.ximg exists
[Tue Feb 28 05:22:55 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf12164_pi14-548_cl_pass0_src3.csv
[Tue Feb 28 05:22:55 2012] fullrun_ccd1_acisf12164_pi14-548_cl_pass0_src3_1.ximg exists
[Tue Feb 28 05:22:55 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf12164_pi14-548_cl_pass0_src3.csv
[Tue Feb 28 05:22:55 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12164_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12164_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 28 05:22:55 2012] fullrun_ccd1_acisf12164_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Tue Feb 28 05:22:55 2012] fullrun_ccd1_acisf12164_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Feb 28 05:22:55 2012] Fit fullrun_ccd1_acisf12164_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Feb 28 06:42:24 2012] Spatial fit model total counts = 262.000000, observed total counts = 262.000000
[Tue Feb 28 06:42:24 2012] Offset between fit and detection position for source 3 = 0.561434 pixels
[Tue Feb 28 06:42:24 2012] 262.604300 total counts/ 31.485300 bgd. counts: snr = 41.189046
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.561434 pixels
  Position = (706.9, 1152.4) = 0 42 13.14 41 18 36.7
  Extent = 1.6 (1.4-1.7)", rotation angle = 0
  Source counts = 231.1 +/- 16.2
  Background counts = 31.5
  Rate = 0.06 +/- 0.004
[Tue Feb 28 06:42:24 2012] Vigneting correction estimate = 1.000000
[Tue Feb 28 06:42:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 28 06:42:24 2012] Assessing source extent using major axis lower bound
[Tue Feb 28 06:42:24 2012] Source does appear to be extended
[Tue Feb 28 06:42:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 28 06:48:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 28 06:48:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 28 06:48:09 2012] Initial guess for spatial extent in simple fitting = 1.59"
[Tue Feb 28 06:48:09 2012] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.008
[Tue Feb 28 06:48:09 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 1.59"
[Tue Feb 28 07:13:42 2012] fullrun_ccd1_acisf12164_pi14-548_cl_pass1_src3.ximg exists
[Tue Feb 28 07:13:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12164_pi14-548_cl_pass1_src3.csv
[Tue Feb 28 07:13:42 2012] fullrun_ccd1_acisf12164_pi14-548_cl_pass1_src3_1.ximg exists
[Tue Feb 28 07:13:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12164_pi14-548_cl_pass1_src3.csv
[Tue Feb 28 07:13:42 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12164_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12164_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 28 07:13:42 2012] fullrun_ccd1_acisf12164_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Tue Feb 28 07:13:42 2012] fullrun_ccd1_acisf12164_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Feb 28 07:13:42 2012] Fit fullrun_ccd1_acisf12164_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Feb 28 08:18:07 2012] Spatial fit model total counts = 253.497000, observed total counts = 253.000000
[Tue Feb 28 08:18:07 2012] Offset between fit and detection position for source 3 = 0.063396 pixels
[Tue Feb 28 08:18:07 2012] 254.123700 total counts/ 49.813700 bgd. counts: snr = 28.947777
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.063396 pixels
  Position = (706.8, 1152.4) = 0 42 13.14 41 18 36.7
  Extent = 1.4 (1.2-1.6)", rotation angle = 0
  Source counts = 204.3 +/- 15.9
  Background counts = 49.8
  Rate = 0.05 +/- 0.004
[Tue Feb 28 08:18:07 2012] Vigneting correction estimate = 1.000000
[Tue Feb 28 08:18:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 28 08:18:07 2012] Assessing source extent using major axis lower bound
[Tue Feb 28 08:18:07 2012] Source does appear to be extended
[Tue Feb 28 08:18:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 28 08:23:18 2012] Writing source region out to fullrun_ccd1_acisf12164_pi14-548_pass1_cl_src3_src.reg
[Tue Feb 28 08:23:18 2012] Extracting stamp from image fullrun_ccd1_acisf12164_pi14-548_cl_sm2.00.img.gz, (643, 1089) - (771, 1216)
[Tue Feb 28 08:23:18 2012] Writing fullrun_ccd1_acisf12164_pi14-548_pass1_cl_src3.gif
[Tue Feb 28 08:24:33 2012] Size of ../../acisf12164/products/events/fullrun_ccd1_acisf12164_pi14-548_pass1_cl_src3_src.evt.gz[events] = 251 counts
[Tue Feb 28 08:24:33 2012] Mean chipx,y = (148.65, 224.95)
[Tue Feb 28 08:24:33 2012] Mean tdetx,y = (4907.05, 4255.65)
[Tue Feb 28 08:24:33 2012] chipx,y range = (128.00-174.00, 202.00-248.00)
[Tue Feb 28 08:24:33 2012] Size of ../../acisf12164/products/events/fullrun_ccd1_acisf12164_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 19 counts
[Tue Feb 28 08:24:35 2012] rmf not found, will run specextract
[Tue Feb 28 08:24:35 2012] arf not found, will run specextract
[Tue Feb 28 08:24:56 2012] ../../acisf12164/products/spectra/fullrun_ccd1_acisf12164_pi14-548_pass1_cl_src3.warf not found
[Tue Feb 28 08:24:56 2012] ../../acisf12164/products/spectra/fullrun_ccd1_acisf12164_pi14-548_pass1_cl_src3.wrmf not found
[Tue Feb 28 08:24:56 2012] Removal of ../../acisf12164/products/spectra/fullrun_ccd1_acisf12164_pi14-548_pass1_cl_src3.soff failed
[Tue Feb 28 08:36:48 2012] Keeping rmf generated by specextract
[Tue Feb 28 08:36:48 2012] 181.038
[Tue Feb 28 09:05:44 2012] Updating aperture counts using extracted products
[Tue Feb 28 09:05:44 2012] Error reading totcts from fullrun_ccd1_acisf12164_pi14-548_pass1_cl_src3_src.pi.gz
[Tue Feb 28 09:05:44 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 28 09:05:44 2012] Using photon index=1.80, rate=0.0515, arf fullrun_ccd1_acisf12164_pi14-548_pass1_cl_src3.arf
[Tue Feb 28 09:05:44 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 28 09:05:44 2012] Updating source flux to 6.4e-13