[Tue Feb 21 01:01:47 2012] Detection parameters:
  Position = (881.6, 885.3) = 0 43 2.92 41 15 23.2
  Extent = 0.6" x 0.5", rotation angle = 61 degrees
  Source counts = 41.5 +/- 6.5
  Background counts = 0.5
  Rate = 0.01 +/- 0.002

[Tue Feb 21 01:01:47 2012] Off-axis axis estimate = 3.18'
[Tue Feb 21 01:39:13 2012] Using EEF radius (= 0.62 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 01:39:13 2012] Initial guess for spatial extent in simple fitting = 0.62"
[Tue Feb 21 01:39:13 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.731
[Tue Feb 21 01:39:13 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 0.62"
[Tue Feb 21 02:06:37 2012] fullrun_ccd2_acisf12163_pi14-548_cl_pass0_src10.ximg exists
[Tue Feb 21 02:06:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12163_pi14-548_cl_pass0_src10.csv
[Tue Feb 21 02:06:37 2012] fullrun_ccd2_acisf12163_pi14-548_cl_pass0_src10_1.ximg exists
[Tue Feb 21 02:06:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12163_pi14-548_cl_pass0_src10.csv
[Tue Feb 21 02:06:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12163_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12163_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 02:06:37 2012] fullrun_ccd2_acisf12163_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Tue Feb 21 02:06:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12163_pi14-548_cl_pass0_tfrozen_src10.csv
[Tue Feb 21 02:06:37 2012] fullrun_ccd2_acisf12163_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Feb 21 02:06:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12163_pi14-548_cl_pass0_tfrozen_src10.csv
[Tue Feb 21 02:06:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12163_pi14-548_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12163_pi14-548_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 02:50:09 2012] Spatial fit model total counts = 40.942500, observed total counts = 56.000000
[Tue Feb 21 02:50:09 2012] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Feb 21 02:50:09 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 02:50:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 02:50:09 2012] Assessing source extent using major
[Tue Feb 21 02:50:09 2012] Source does appear to be extended
[Tue Feb 21 02:50:09 2012] Computing asymmetry using major and minor axis, asym = 1.31
[Tue Feb 21 03:28:10 2012] Using EEF radius (= 0.62 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 03:28:10 2012] Initial guess for spatial extent in simple fitting = 0.62"
[Tue Feb 21 03:28:10 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.731
[Tue Feb 21 03:28:10 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 0.62"
[Tue Feb 21 03:53:03 2012] fullrun_ccd2_acisf12163_pi14-548_cl_pass1_src10.ximg exists
[Tue Feb 21 03:53:03 2012] fullrun_ccd2_acisf12163_pi14-548_cl_pass1_src10_1.ximg exists
[Tue Feb 21 03:53:03 2012] Fit fullrun_ccd2_acisf12163_pi14-548_cl_pass1_src10 appears to have run properly
[Tue Feb 21 03:53:03 2012] fullrun_ccd2_acisf12163_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Tue Feb 21 03:53:03 2012] fullrun_ccd2_acisf12163_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Feb 21 03:53:03 2012] Fit fullrun_ccd2_acisf12163_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Tue Feb 21 04:35:06 2012] Spatial fit model total counts = 52.949700, observed total counts = 56.000000
[Tue Feb 21 04:35:06 2012] Offset between fit and detection position for source 8 = 0.611136 pixels
[Tue Feb 21 04:35:06 2012] 53.265200 total counts/ 13.494700 bgd. counts: snr = 10.826284
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.611136 pixels
  Position = (882.2, 885.5) = 0 43 2.91 41 15 23.0
  Extent = 0.6 (0.5-0.6)", rotation angle = 0
  Source counts = 39.8 +/- 7.3
  Background counts = 13.5
  Rate = 0.01 +/- 0.002
[Tue Feb 21 04:35:06 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 04:35:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 04:35:06 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 04:35:06 2012] Source does appear to be extended
[Tue Feb 21 04:35:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 04:52:15 2012] Writing source region out to fullrun_ccd2_acisf12163_pi14-548_pass1_cl_src8_src.reg
[Tue Feb 21 04:52:15 2012] Extracting stamp from image fullrun_ccd2_acisf12163_pi14-548_cl_sm2.00.img.gz, (856, 860) - (908, 911)
[Tue Feb 21 04:52:15 2012] Writing fullrun_ccd2_acisf12163_pi14-548_pass1_cl_src8.gif
[Tue Feb 21 04:57:46 2012] Size of ../../acisf12163/products/events/fullrun_ccd2_acisf12163_pi14-548_pass1_cl_src8_src.evt.gz[events] = 40 counts
[Tue Feb 21 04:57:46 2012] Mean chipx,y = (408.20, 828.08)
[Tue Feb 21 04:57:46 2012] Mean tdetx,y = (3889.07, 3677.80)
[Tue Feb 21 04:57:46 2012] chipx,y range = (389.00-425.00, 811.00-845.00)
[Tue Feb 21 04:57:46 2012] Size of ../../acisf12163/products/events/fullrun_ccd2_acisf12163_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 3 counts
[Tue Feb 21 04:57:47 2012] Not generating rmf since there are only 39 counts
[Tue Feb 21 04:57:47 2012] arf not found, will run specextract
[Tue Feb 21 04:58:15 2012] ../../acisf12163/products/spectra/fullrun_ccd2_acisf12163_pi14-548_pass1_cl_src8.warf not found
[Tue Feb 21 04:58:15 2012] ../../acisf12163/products/spectra/fullrun_ccd2_acisf12163_pi14-548_pass1_cl_src8.wrmf not found
[Tue Feb 21 04:58:15 2012] Removal of ../../acisf12163/products/spectra/fullrun_ccd2_acisf12163_pi14-548_pass1_cl_src8.soff failed
[Tue Feb 21 05:03:23 2012] Spectrum 8 has only 40 counts, deleting rmf
[Tue Feb 21 05:03:23 2012] 188.987
[Tue Feb 21 05:24:28 2012] Updating aperture counts using extracted products
[Tue Feb 21 05:24:28 2012] Error reading totcts from fullrun_ccd2_acisf12163_pi14-548_pass1_cl_src8_src.pi.gz
[Tue Feb 21 05:24:28 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 05:24:28 2012] Using photon index=1.80, rate=0.01, arf fullrun_ccd2_acisf12163_pi14-548_pass1_cl_src8.arf
[Tue Feb 21 05:24:28 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 05:24:28 2012] Updating source flux to 1.2e-13
[Tue Feb 21 05:25:09 2012] Flag p found in src. 8 procflags, skipping spectral fitting
[Tue Feb 21 05:25:09 2012] Source 8 has fewer than 100.000000 counts, skipping spectral fitting