[Mon Jan 23 01:01:59 2012] Detection parameters:
  Position = (901.2, 106.4) = 0 42 47.18 41 16 28.6
  Extent = 0.5" x 0.5", rotation angle = 161 degrees
  Source counts = 423.8 +/- 20.7
  Background counts = 5.2
  Rate = 0.1 +/- 0.005

[Mon Jan 23 01:01:59 2012] Off-axis axis estimate = 0.85'
[Mon Jan 23 02:01:41 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 02:01:41 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Jan 23 02:01:41 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.923
[Mon Jan 23 02:01:41 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.38"
[Mon Jan 23 02:37:55 2012] fullrun_ccd3_acisf12162_pi14-548_cl_pass0_src1.ximg exists
[Mon Jan 23 02:37:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12162_pi14-548_cl_pass0_src1.csv
[Mon Jan 23 02:37:55 2012] fullrun_ccd3_acisf12162_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Jan 23 02:37:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12162_pi14-548_cl_pass0_src1.csv
[Mon Jan 23 02:37:55 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12162_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12162_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 02:37:55 2012] fullrun_ccd3_acisf12162_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Jan 23 02:37:55 2012] fullrun_ccd3_acisf12162_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jan 23 02:37:55 2012] Fit fullrun_ccd3_acisf12162_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jan 23 02:49:02 2012] Spatial fit model total counts = 431.059000, observed total counts = 427.000000
[Mon Jan 23 02:49:02 2012] Offset between fit and detection position for source 3 = 0.708111 pixels
[Mon Jan 23 02:49:02 2012] 432.802100 total counts/ 24.435100 bgd. counts: snr = 82.612084
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.708111 pixels
  Position = (901.7, 106.9) = 0 42 47.18 41 16 28.6
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 408.4 +/- 20.8
  Background counts = 24.4
  Rate = 0.1 +/- 0.005
[Mon Jan 23 02:49:02 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 02:49:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 02:49:02 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 02:49:02 2012] Source does appear to be extended
[Mon Jan 23 02:49:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 03:43:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan 23 03:43:34 2012] Initial guess for spatial extent in simple fitting = 0.42"
[Mon Jan 23 03:43:34 2012] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.816
[Mon Jan 23 03:43:34 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.42"
[Mon Jan 23 04:22:33 2012] fullrun_ccd3_acisf12162_pi14-548_cl_pass1_src1.ximg exists
[Mon Jan 23 04:22:33 2012] fullrun_ccd3_acisf12162_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Jan 23 04:22:33 2012] Fit fullrun_ccd3_acisf12162_pi14-548_cl_pass1_src1 appears to have run properly
[Mon Jan 23 04:22:33 2012] fullrun_ccd3_acisf12162_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Jan 23 04:22:33 2012] fullrun_ccd3_acisf12162_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jan 23 04:22:33 2012] Fit fullrun_ccd3_acisf12162_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jan 23 04:32:43 2012] Spatial fit model total counts = 430.528000, observed total counts = 431.000000
[Mon Jan 23 04:32:43 2012] Offset between fit and detection position for source 3 = 0.001624 pixels
[Mon Jan 23 04:32:43 2012] 431.579400 total counts/ 28.836400 bgd. counts: snr = 74.999347
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.001624 pixels
  Position = (901.7, 106.9) = 0 42 47.18 41 16 28.6
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 402.7 +/- 20.8
  Background counts = 28.8
  Rate = 0.1 +/- 0.005
[Mon Jan 23 04:32:43 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 04:32:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 04:32:43 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 04:32:43 2012] Source does appear to be extended
[Mon Jan 23 04:32:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 05:03:18 2012] Writing source region out to fullrun_ccd3_acisf12162_pi14-548_pass1_cl_src3_src.reg
[Mon Jan 23 05:03:18 2012] Extracting stamp from image fullrun_ccd3_acisf12162_pi14-548_cl_sm2.00.img.gz, (883, 88) - (921, 126)
[Mon Jan 23 05:03:18 2012] Writing fullrun_ccd3_acisf12162_pi14-548_pass1_cl_src3.gif
[Mon Jan 23 05:03:21 2012] Size of ../../acisf12162/products/events/fullrun_ccd3_acisf12162_pi14-548_pass1_cl_src3_src.evt.gz[events] = 409 counts
[Mon Jan 23 05:03:21 2012] Mean chipx,y = (903.57, 931.81)
[Mon Jan 23 05:03:21 2012] Mean tdetx,y = (4200.19, 3964.57)
[Mon Jan 23 05:03:21 2012] chipx,y range = (886.00-922.00, 914.00-950.00)
[Mon Jan 23 05:03:21 2012] Size of ../../acisf12162/products/events/fullrun_ccd3_acisf12162_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 15 counts
[Mon Jan 23 05:03:22 2012] rmf not found, will run specextract
[Mon Jan 23 05:03:22 2012] arf not found, will run specextract
[Mon Jan 23 05:03:49 2012] ../../acisf12162/products/spectra/fullrun_ccd3_acisf12162_pi14-548_pass1_cl_src3.warf not found
[Mon Jan 23 05:03:49 2012] ../../acisf12162/products/spectra/fullrun_ccd3_acisf12162_pi14-548_pass1_cl_src3.wrmf not found
[Mon Jan 23 05:03:49 2012] Removal of ../../acisf12162/products/spectra/fullrun_ccd3_acisf12162_pi14-548_pass1_cl_src3.soff failed
[Mon Jan 23 05:26:14 2012] Keeping rmf generated by specextract
[Mon Jan 23 05:26:14 2012] 201.192
[Mon Jan 23 05:27:18 2012] Updating aperture counts using extracted products
[Mon Jan 23 05:27:18 2012] Error reading totcts from fullrun_ccd3_acisf12162_pi14-548_pass1_cl_src3_src.pi.gz
[Mon Jan 23 05:27:18 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jan 23 05:27:18 2012] Using photon index=1.80, rate=0.102, arf fullrun_ccd3_acisf12162_pi14-548_pass1_cl_src3.arf
[Mon Jan 23 05:27:18 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Jan 23 05:27:18 2012] Updating source flux to 1.1e-12
[Mon Jan 23 05:28:33 2012] Reading fit data from acisf12162/analysis//spectral/fullrun_ccd3_acisf12162_pi14-548_pass1_cl_src3_pl.csv
[Mon Jan 23 05:28:33 2012] Spectral fit parameter nH value = 1.64631e+21
[Mon Jan 23 05:28:33 2012] Spectral fit parameter PhoIndex value = 1.44038
[Mon Jan 23 05:28:33 2012] Failed to get F(0.3-8.0) from acisf12162/analysis//spectral/fullrun_ccd3_acisf12162_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Mon Jan 23 05:28:33 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jan 23 05:28:33 2012] Using Nh = 1.6e+21, photon index=1.44, rate=0.102, arf fullrun_ccd3_acisf12162_pi14-548_pass1_cl_src3.arf
[Mon Jan 23 05:28:33 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Jan 23 05:28:33 2012] Updating source flux to 1.3e-12