[Mon Jan 23 01:01:34 2012] Detection parameters:
  Position = (460.4, 948.8) = 0 43 10.63 41 14 51.7
  Extent = 1.2" x 0.7", rotation angle = 84 degrees
  Source counts = 315.8 +/- 17.9
  Background counts = 4.2
  Rate = 0.08 +/- 0.005

[Mon Jan 23 01:01:34 2012] Off-axis axis estimate = 4.82'
[Mon Jan 23 01:41:55 2012] Using EEF radius (= 1.11 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 01:41:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jan 23 01:41:55 2012] Initial guess for spatial extent in simple fitting = 1.11"
[Mon Jan 23 01:41:55 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.986
[Mon Jan 23 01:41:55 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 1.11"
[Mon Jan 23 02:01:41 2012] fullrun_ccd2_acisf12162_pi14-548_cl_pass0_src1.ximg exists
[Mon Jan 23 02:01:41 2012] fullrun_ccd2_acisf12162_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Jan 23 02:01:41 2012] Fit fullrun_ccd2_acisf12162_pi14-548_cl_pass0_src1 appears to have run properly
[Mon Jan 23 02:01:41 2012] fullrun_ccd2_acisf12162_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Jan 23 02:01:41 2012] fullrun_ccd2_acisf12162_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jan 23 02:01:41 2012] Fit fullrun_ccd2_acisf12162_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jan 23 02:48:59 2012] Spatial fit model total counts = 313.370000, observed total counts = 316.000000
[Mon Jan 23 02:48:59 2012] Offset between fit and detection position for source 3 = 0.431416 pixels
[Mon Jan 23 02:48:59 2012] 316.862500 total counts/ 41.525500 bgd. counts: snr = 42.727466
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.431416 pixels
  Position = (460.9, 948.9) = 0 43 10.64 41 14 51.5
  Extent = 1.1 (0.9-1.2)", rotation angle = 0
  Source counts = 275.3 +/- 17.8
  Background counts = 41.5
  Rate = 0.07 +/- 0.004
[Mon Jan 23 02:48:59 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 02:48:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 02:48:59 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 02:48:59 2012] Source does appear to be extended
[Mon Jan 23 02:48:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 03:23:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan 23 03:23:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jan 23 03:23:14 2012] Initial guess for spatial extent in simple fitting = 1.06"
[Mon Jan 23 03:23:14 2012] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.269
[Mon Jan 23 03:23:14 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 1.06"
[Mon Jan 23 03:43:33 2012] fullrun_ccd2_acisf12162_pi14-548_cl_pass1_src1.ximg exists
[Mon Jan 23 03:43:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12162_pi14-548_cl_pass1_src1.csv
[Mon Jan 23 03:43:33 2012] fullrun_ccd2_acisf12162_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Jan 23 03:43:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12162_pi14-548_cl_pass1_src1.csv
[Mon Jan 23 03:43:33 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12162_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12162_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 03:43:33 2012] fullrun_ccd2_acisf12162_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Jan 23 03:43:33 2012] fullrun_ccd2_acisf12162_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jan 23 03:43:33 2012] Fit fullrun_ccd2_acisf12162_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jan 23 04:32:40 2012] Spatial fit model total counts = 315.103000, observed total counts = 316.000000
[Mon Jan 23 04:32:40 2012] Offset between fit and detection position for source 3 = 0.031055 pixels
[Mon Jan 23 04:32:40 2012] 318.669500 total counts/ 47.759500 bgd. counts: snr = 39.200820
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.031055 pixels
  Position = (460.8, 948.9) = 0 43 10.64 41 14 51.5
  Extent = 1.0 (0.9-1.2)", rotation angle = 0
  Source counts = 270.9 +/- 17.9
  Background counts = 47.8
  Rate = 0.07 +/- 0.005
[Mon Jan 23 04:32:40 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 04:32:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 04:32:40 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 04:32:40 2012] Source does appear to be extended
[Mon Jan 23 04:32:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 04:53:55 2012] Writing source region out to fullrun_ccd2_acisf12162_pi14-548_pass1_cl_src3_src.reg
[Mon Jan 23 04:53:55 2012] Extracting stamp from image fullrun_ccd2_acisf12162_pi14-548_cl_sm2.00.img.gz, (413, 901) - (508, 996)
[Mon Jan 23 04:53:55 2012] Writing fullrun_ccd2_acisf12162_pi14-548_pass1_cl_src3.gif
[Mon Jan 23 04:53:56 2012] Size of ../../acisf12162/products/events/fullrun_ccd2_acisf12162_pi14-548_pass1_cl_src3_src.evt.gz[events] = 312 counts
[Mon Jan 23 04:53:56 2012] Mean chipx,y = (641.85, 894.63)
[Mon Jan 23 04:53:56 2012] Mean tdetx,y = (3955.63, 3444.15)
[Mon Jan 23 04:53:56 2012] chipx,y range = (619.00-661.00, 873.00-918.00)
[Mon Jan 23 04:53:56 2012] Size of ../../acisf12162/products/events/fullrun_ccd2_acisf12162_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 8 counts
[Mon Jan 23 04:53:57 2012] rmf not found, will run specextract
[Mon Jan 23 04:53:57 2012] arf not found, will run specextract
[Mon Jan 23 04:54:31 2012] ../../acisf12162/products/spectra/fullrun_ccd2_acisf12162_pi14-548_pass1_cl_src3.warf not found
[Mon Jan 23 04:54:31 2012] ../../acisf12162/products/spectra/fullrun_ccd2_acisf12162_pi14-548_pass1_cl_src3.wrmf not found
[Mon Jan 23 04:54:31 2012] Removal of ../../acisf12162/products/spectra/fullrun_ccd2_acisf12162_pi14-548_pass1_cl_src3.soff failed
[Mon Jan 23 05:03:18 2012] Keeping rmf generated by specextract
[Mon Jan 23 05:03:18 2012] 175.936
[Mon Jan 23 05:27:18 2012] Updating aperture counts using extracted products
[Mon Jan 23 05:27:18 2012] Error reading totcts from fullrun_ccd2_acisf12162_pi14-548_pass1_cl_src3_src.pi.gz
[Mon Jan 23 05:27:18 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jan 23 05:27:18 2012] Using photon index=1.80, rate=0.0683, arf fullrun_ccd2_acisf12162_pi14-548_pass1_cl_src3.arf
[Mon Jan 23 05:27:18 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Jan 23 05:27:18 2012] Updating source flux to 8.7e-13
[Mon Jan 23 05:28:11 2012] Reading fit data from acisf12162/analysis//spectral/fullrun_ccd2_acisf12162_pi14-548_pass1_cl_src3_pl.csv
[Mon Jan 23 05:28:11 2012] Spectral fit parameter nH value = 1.20349e+21
[Mon Jan 23 05:28:11 2012] Spectral fit parameter PhoIndex value = 1.26143
[Mon Jan 23 05:28:11 2012] Failed to get F(0.3-8.0) from acisf12162/analysis//spectral/fullrun_ccd2_acisf12162_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Mon Jan 23 05:28:11 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jan 23 05:28:11 2012] Using Nh = 1.2e+21, photon index=1.26, rate=0.0683, arf fullrun_ccd2_acisf12162_pi14-548_pass1_cl_src3.arf
[Mon Jan 23 05:28:11 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Jan 23 05:28:11 2012] Updating source flux to 1.1e-12