[Mon Jan 23 15:59:22 2012] Detection parameters:
  Position = (859.7, 229.1) = 0 42 58.33 41 15 29.4
  Extent = 0.5" x 0.5", rotation angle = 53 degrees
  Source counts = 25.9 +/- 5.1
  Background counts = 0.1
  Rate = 0.007 +/- 0.001

[Mon Jan 23 15:59:24 2012] Off-axis axis estimate = 2.66'
[Mon Jan 23 16:53:42 2012] Using EEF radius (= 0.52 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 16:53:42 2012] Initial guess for spatial extent in simple fitting = 0.52"
[Mon Jan 23 16:53:42 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.935
[Mon Jan 23 16:53:42 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 0.52"
[Mon Jan 23 17:28:35 2012] fullrun_ccd3_acisf12161_pi14-548_cl_pass0_src25.ximg exists
[Mon Jan 23 17:28:35 2012] Warning: total counts is not > 0
[Mon Jan 23 17:28:35 2012] fullrun_ccd3_acisf12161_pi14-548_cl_pass0_src25_1.ximg exists
[Mon Jan 23 17:28:35 2012] Warning: total counts is not > 0
[Mon Jan 23 17:28:35 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12161_pi14-548_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12161_pi14-548_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 17:28:35 2012] fullrun_ccd3_acisf12161_pi14-548_cl_pass0_tfrozen_src25.ximg exists
[Mon Jan 23 17:28:35 2012] Warning: total counts is not > 0
[Mon Jan 23 17:28:35 2012] fullrun_ccd3_acisf12161_pi14-548_cl_pass0_tfrozen_src25_1.ximg exists
[Mon Jan 23 17:28:35 2012] Warning: total counts is not > 0
[Mon Jan 23 17:28:35 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12161_pi14-548_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12161_pi14-548_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 17:54:01 2012] Source 4 appears to have -ve number of counts, which is not physical
Fit may be corrupt, not incorporating results
[Mon Jan 23 17:54:01 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:54:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:54:01 2012] Assessing source extent using major
[Mon Jan 23 17:54:01 2012] Source does appear to be extended
[Mon Jan 23 17:54:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 18:37:35 2012] Using EEF radius (= 0.52 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 18:37:35 2012] Initial guess for spatial extent in simple fitting = 0.52"
[Mon Jan 23 18:37:35 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.935
[Mon Jan 23 18:37:35 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 0.52"
[Mon Jan 23 18:56:35 2012] fullrun_ccd3_acisf12161_pi14-548_cl_pass1_src14.ximg exists
[Mon Jan 23 18:56:35 2012] Warning: total counts is not > 0
[Mon Jan 23 18:56:35 2012] fullrun_ccd3_acisf12161_pi14-548_cl_pass1_src14_1.ximg exists
[Mon Jan 23 18:56:35 2012] Warning: total counts is not > 0
[Mon Jan 23 18:56:35 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12161_pi14-548_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12161_pi14-548_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 18:56:35 2012] fullrun_ccd3_acisf12161_pi14-548_cl_pass1_tfrozen_src14.ximg exists
[Mon Jan 23 18:56:35 2012] Warning: total counts is not > 0
[Mon Jan 23 18:56:35 2012] fullrun_ccd3_acisf12161_pi14-548_cl_pass1_tfrozen_src14_1.ximg exists
[Mon Jan 23 18:56:35 2012] Warning: total counts is not > 0
[Mon Jan 23 18:56:35 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12161_pi14-548_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12161_pi14-548_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 19:18:04 2012] Source 4 appears to have -ve number of counts, which is not physical
Fit may be corrupt, not incorporating results
[Mon Jan 23 19:18:04 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 19:18:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 19:18:04 2012] Assessing source extent using major
[Mon Jan 23 19:18:04 2012] Source does appear to be extended
[Mon Jan 23 19:18:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 19:27:39 2012] Writing source region out to fullrun_ccd3_acisf12161_pi14-548_pass1_cl_src4_src.reg
[Mon Jan 23 19:27:39 2012] Extracting stamp from image fullrun_ccd3_acisf12161_pi14-548_cl_sm2.00.img.gz, (837, 207) - (882, 252)
[Mon Jan 23 19:27:39 2012] Writing fullrun_ccd3_acisf12161_pi14-548_pass1_cl_src4.gif
[Mon Jan 23 19:32:20 2012] ../../acisf12161/products/events/fullrun_ccd3_acisf12161_pi14-548_pass1_cl_src4_src.evt.gz[events] does not have any counts, not extracting products.
[Mon Jan 23 19:33:32 2012] No arf file found
[Mon Jan 23 19:34:34 2012] Updating aperture counts using extracted products
[Mon Jan 23 19:34:34 2012] Error reading totcts from fullrun_ccd3_acisf12161_pi14-548_pass1_cl_src4_src.pi
[Mon Jan 23 19:34:34 2012] No arf file for this source, not re-computing flux
[Mon Jan 23 19:34:39 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jan 23 19:34:40 2012] acisf12161/analysis//spectral/fullrun_ccd3_acisf12161_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete