[Mon Jan 23 15:59:23 2012] Detection parameters:
  Position = (1190.9, 299.6) = 0 42 43.88 41 16 4.1
  Extent = 0.5" x 0.5", rotation angle = 45 degrees
  Source counts = 32.1 +/- 5.8
  Background counts = 1.9
  Rate = 0.008 +/- 0.001

[Mon Jan 23 15:59:24 2012] Off-axis axis estimate = 0.42'
[Mon Jan 23 16:53:42 2012] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 16:53:42 2012] Initial guess for spatial extent in simple fitting = 0.40"
[Mon Jan 23 16:53:42 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.879
[Mon Jan 23 16:53:42 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 0.40"
[Mon Jan 23 17:28:35 2012] fullrun_ccd3_acisf12161_pi14-548_cl_pass0_src21.ximg exists
[Mon Jan 23 17:28:35 2012] Warning: total counts is not > 0
[Mon Jan 23 17:28:35 2012] fullrun_ccd3_acisf12161_pi14-548_cl_pass0_src21_1.ximg exists
[Mon Jan 23 17:28:35 2012] Warning: total counts is not > 0
[Mon Jan 23 17:28:35 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12161_pi14-548_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12161_pi14-548_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 17:28:35 2012] fullrun_ccd3_acisf12161_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Mon Jan 23 17:28:35 2012] Warning: total counts is not > 0
[Mon Jan 23 17:28:35 2012] fullrun_ccd3_acisf12161_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Mon Jan 23 17:28:35 2012] Warning: total counts is not > 0
[Mon Jan 23 17:28:35 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12161_pi14-548_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12161_pi14-548_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 17:54:01 2012] Source 13 is offset by 2.090689 and -0.526750 pixels which is larger than
2 X fitted extent = 0.403293 x 0.403293, not incorporating fit results
[Mon Jan 23 17:54:01 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:54:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:54:01 2012] Assessing source extent using major
[Mon Jan 23 17:54:01 2012] Source does appear to be extended
[Mon Jan 23 17:54:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 18:37:35 2012] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 18:37:35 2012] Initial guess for spatial extent in simple fitting = 0.40"
[Mon Jan 23 18:37:35 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.879
[Mon Jan 23 18:37:35 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 0.40"
[Mon Jan 23 18:56:35 2012] fullrun_ccd3_acisf12161_pi14-548_cl_pass1_src11.ximg exists
[Mon Jan 23 18:56:35 2012] Warning: total counts is not > 0
[Mon Jan 23 18:56:35 2012] fullrun_ccd3_acisf12161_pi14-548_cl_pass1_src11_1.ximg exists
[Mon Jan 23 18:56:35 2012] Warning: total counts is not > 0
[Mon Jan 23 18:56:35 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12161_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12161_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 18:56:35 2012] fullrun_ccd3_acisf12161_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Mon Jan 23 18:56:35 2012] Warning: total counts is not > 0
[Mon Jan 23 18:56:35 2012] fullrun_ccd3_acisf12161_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Mon Jan 23 18:56:35 2012] Warning: total counts is not > 0
[Mon Jan 23 18:56:35 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12161_pi14-548_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12161_pi14-548_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 19:18:04 2012] Source 13 is offset by -1.605929 and -2.939494 pixels which is larger than
2 X fitted extent = 0.403293 x 0.403293, not incorporating fit results
[Mon Jan 23 19:18:04 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 19:18:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 19:18:04 2012] Assessing source extent using major
[Mon Jan 23 19:18:04 2012] Source does appear to be extended
[Mon Jan 23 19:18:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 19:27:39 2012] Writing source region out to fullrun_ccd3_acisf12161_pi14-548_pass1_cl_src13_src.reg
[Mon Jan 23 19:27:39 2012] Extracting stamp from image fullrun_ccd3_acisf12161_pi14-548_cl_sm2.00.img.gz, (1168, 277) - (1213, 322)
[Mon Jan 23 19:27:39 2012] Writing fullrun_ccd3_acisf12161_pi14-548_pass1_cl_src13.gif
[Mon Jan 23 19:32:06 2012] ../../acisf12161/products/events/fullrun_ccd3_acisf12161_pi14-548_pass1_cl_src13_src.evt.gz[events] does not have any counts, not extracting products.
[Mon Jan 23 19:33:32 2012] No arf file found
[Mon Jan 23 19:34:33 2012] Updating aperture counts using extracted products
[Mon Jan 23 19:34:33 2012] Error reading totcts from fullrun_ccd3_acisf12161_pi14-548_pass1_cl_src13_src.pi
[Mon Jan 23 19:34:34 2012] No arf file for this source, not re-computing flux
[Mon Jan 23 19:34:39 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jan 23 19:34:40 2012] acisf12161/analysis//spectral/fullrun_ccd3_acisf12161_pi14-548_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete