[Mon Jan 23 15:59:20 2012] Detection parameters:
  Position = (847.1, 1190.0) = 0 42 41.43 41 15 24.0
  Extent = 0.5" x 0.5", rotation angle = 104 degrees
  Source counts = 10.7 +/- 3.3
  Background counts = 0.3
  Rate = 0.003 +/- 0.0008

[Mon Jan 23 15:59:21 2012] Off-axis axis estimate = 0.58'
[Mon Jan 23 16:39:23 2012] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 16:39:23 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Mon Jan 23 16:39:23 2012] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.601
[Mon Jan 23 16:39:23 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 0.39"
[Mon Jan 23 16:53:42 2012] fullrun_ccd2_acisf12161_pi14-548_cl_pass0_src14.ximg exists
[Mon Jan 23 16:53:42 2012] Warning: total counts is not > 0
[Mon Jan 23 16:53:42 2012] fullrun_ccd2_acisf12161_pi14-548_cl_pass0_src14_1.ximg exists
[Mon Jan 23 16:53:42 2012] Warning: total counts is not > 0
[Mon Jan 23 16:53:42 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12161_pi14-548_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12161_pi14-548_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 16:53:42 2012] fullrun_ccd2_acisf12161_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Mon Jan 23 16:53:42 2012] Warning: total counts is not > 0
[Mon Jan 23 16:53:42 2012] fullrun_ccd2_acisf12161_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Mon Jan 23 16:53:42 2012] Warning: total counts is not > 0
[Mon Jan 23 16:53:42 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12161_pi14-548_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12161_pi14-548_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 17:53:58 2012] Source 10 is offset by 3.095722 and -1.648739 pixels which is larger than
2 X fitted extent = 0.394959 x 0.394959, not incorporating fit results
[Mon Jan 23 17:53:58 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:53:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:53:58 2012] Assessing source extent using major
[Mon Jan 23 17:53:58 2012] Source does appear to be extended
[Mon Jan 23 17:53:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 18:26:00 2012] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 18:26:00 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Mon Jan 23 18:26:00 2012] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.601
[Mon Jan 23 18:26:00 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 0.39"
[Mon Jan 23 18:37:35 2012] fullrun_ccd2_acisf12161_pi14-548_cl_pass1_src13.ximg exists
[Mon Jan 23 18:37:35 2012] Warning: total counts is not > 0
[Mon Jan 23 18:37:35 2012] fullrun_ccd2_acisf12161_pi14-548_cl_pass1_src13_1.ximg exists
[Mon Jan 23 18:37:35 2012] Warning: total counts is not > 0
[Mon Jan 23 18:37:35 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12161_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12161_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 18:37:35 2012] fullrun_ccd2_acisf12161_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Mon Jan 23 18:37:35 2012] Warning: total counts is not > 0
[Mon Jan 23 18:37:35 2012] fullrun_ccd2_acisf12161_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Mon Jan 23 18:37:35 2012] Warning: total counts is not > 0
[Mon Jan 23 18:37:35 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12161_pi14-548_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12161_pi14-548_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 19:18:02 2012] Source 10 is offset by -1.363566 and -3.546020 pixels which is larger than
2 X fitted extent = 0.394959 x 0.394959, not incorporating fit results
[Mon Jan 23 19:18:02 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 19:18:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 19:18:02 2012] Assessing source extent using major
[Mon Jan 23 19:18:02 2012] Source does appear to be extended
[Mon Jan 23 19:18:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 19:25:18 2012] Writing source region out to fullrun_ccd2_acisf12161_pi14-548_pass1_cl_src10_src.reg
[Mon Jan 23 19:25:18 2012] Extracting stamp from image fullrun_ccd2_acisf12161_pi14-548_cl_sm2.00.img.gz, (825, 1167) - (870, 1205)
[Mon Jan 23 19:25:18 2012] Writing fullrun_ccd2_acisf12161_pi14-548_pass1_cl_src10.gif
[Mon Jan 23 19:27:10 2012] ../../acisf12161/products/events/fullrun_ccd2_acisf12161_pi14-548_pass1_cl_src10_src.evt.gz[events] does not have any counts, not extracting products.
[Mon Jan 23 19:27:39 2012] No arf file found
[Mon Jan 23 19:34:33 2012] Updating aperture counts using extracted products
[Mon Jan 23 19:34:33 2012] Error reading totcts from fullrun_ccd2_acisf12161_pi14-548_pass1_cl_src10_src.pi
[Mon Jan 23 19:34:33 2012] No arf file for this source, not re-computing flux
[Mon Jan 23 19:34:38 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jan 23 19:34:39 2012] acisf12161/analysis//spectral/fullrun_ccd2_acisf12161_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete