[Mon Jan 23 15:59:18 2012] Detection parameters:
  Position = (454.0, 493.8) = 0 42 35.22 41 20 5.8
  Extent = 0.6" x 0.5", rotation angle = 48 degrees
  Source counts = 60.8 +/- 7.8
  Background counts = 0.2
  Rate = 0.02 +/- 0.002

[Mon Jan 23 15:59:19 2012] Off-axis axis estimate = 4.75'
[Mon Jan 23 16:26:24 2012] Using EEF radius (= 1.08 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 16:26:24 2012] Initial guess for spatial extent in simple fitting = 1.08"
[Mon Jan 23 16:26:24 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.231
[Mon Jan 23 16:26:24 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 1.08"
[Mon Jan 23 16:39:23 2012] fullrun_ccd1_acisf12161_pi14-548_cl_pass0_src6.ximg exists
[Mon Jan 23 16:39:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12161_pi14-548_cl_pass0_src6.csv
[Mon Jan 23 16:39:23 2012] fullrun_ccd1_acisf12161_pi14-548_cl_pass0_src6_1.ximg exists
[Mon Jan 23 16:39:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12161_pi14-548_cl_pass0_src6.csv
[Mon Jan 23 16:39:23 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12161_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12161_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 16:39:23 2012] fullrun_ccd1_acisf12161_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Mon Jan 23 16:39:23 2012] fullrun_ccd1_acisf12161_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Jan 23 16:39:23 2012] Fit fullrun_ccd1_acisf12161_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Mon Jan 23 17:53:56 2012] Source 4 is offset by 1.040544 and 1.831214 pixels which is larger than
2 X fitted extent = 1.102028 x 1.102028, not incorporating fit results
[Mon Jan 23 17:53:56 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:53:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:53:56 2012] Assessing source extent using major
[Mon Jan 23 17:53:56 2012] Source does appear to be extended
[Mon Jan 23 17:53:56 2012] Computing asymmetry using major and minor axis, asym = 1.30
[Mon Jan 23 18:07:23 2012] Using EEF radius (= 1.08 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 18:07:23 2012] Initial guess for spatial extent in simple fitting = 1.08"
[Mon Jan 23 18:07:23 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.231
[Mon Jan 23 18:07:23 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 1.08"
[Mon Jan 23 18:26:00 2012] fullrun_ccd1_acisf12161_pi14-548_cl_pass1_src5.ximg exists
[Mon Jan 23 18:26:00 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf12161_pi14-548_cl_pass1_src5.csv
[Mon Jan 23 18:26:00 2012] fullrun_ccd1_acisf12161_pi14-548_cl_pass1_src5_1.ximg exists
[Mon Jan 23 18:26:00 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf12161_pi14-548_cl_pass1_src5.csv
[Mon Jan 23 18:26:00 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12161_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12161_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 18:26:00 2012] fullrun_ccd1_acisf12161_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Mon Jan 23 18:26:00 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf12161_pi14-548_cl_pass1_tfrozen_src5.csv
[Mon Jan 23 18:26:00 2012] fullrun_ccd1_acisf12161_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Jan 23 18:26:00 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf12161_pi14-548_cl_pass1_tfrozen_src5.csv
[Mon Jan 23 18:26:00 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12161_pi14-548_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12161_pi14-548_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 19:18:00 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 13.349996 pixels away
[Mon Jan 23 19:18:00 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 19:18:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 19:18:00 2012] Assessing source extent using major
[Mon Jan 23 19:18:00 2012] Source does appear to be extended
[Mon Jan 23 19:18:00 2012] Computing asymmetry using major and minor axis, asym = 1.30
[Mon Jan 23 19:22:03 2012] Writing source region out to fullrun_ccd1_acisf12161_pi14-548_pass1_cl_src4_src.reg
[Mon Jan 23 19:22:03 2012] Extracting stamp from image fullrun_ccd1_acisf12161_pi14-548_cl_sm2.00.img.gz, (425, 465) - (483, 523)
[Mon Jan 23 19:22:03 2012] Writing fullrun_ccd1_acisf12161_pi14-548_pass1_cl_src4.gif
[Mon Jan 23 19:23:28 2012] Size of ../../acisf12161/products/events/fullrun_ccd1_acisf12161_pi14-548_pass1_cl_src4_src.evt.gz[events] = 1 counts
[Mon Jan 23 19:23:28 2012] Mean chipx,y = (297.00, 607.00)
[Mon Jan 23 19:23:28 2012] Mean tdetx,y = (4525.00, 4404.00)
[Mon Jan 23 19:23:28 2012] chipx,y range = (297.00-297.00, 607.00-607.00)
[Mon Jan 23 19:23:28 2012] Size of ../../acisf12161/products/events/fullrun_ccd1_acisf12161_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 1 counts
[Mon Jan 23 19:23:29 2012] Not generating rmf since there are only 60 counts
[Mon Jan 23 19:23:29 2012] arf not found, will run specextract
[Mon Jan 23 19:23:53 2012] ../../acisf12161/products/spectra/fullrun_ccd1_acisf12161_pi14-548_pass1_cl_src4.warf not found
[Mon Jan 23 19:23:53 2012] ../../acisf12161/products/spectra/fullrun_ccd1_acisf12161_pi14-548_pass1_cl_src4.wrmf not found
[Mon Jan 23 19:23:53 2012] Removal of ../../acisf12161/products/spectra/fullrun_ccd1_acisf12161_pi14-548_pass1_cl_src4.soff failed
[Mon Jan 23 19:25:17 2012] Spectrum 4 has only 61 counts, deleting rmf
[Mon Jan 23 19:25:17 2012] 196.603
[Mon Jan 23 19:34:33 2012] Updating aperture counts using extracted products
[Mon Jan 23 19:34:33 2012] Error reading totcts from fullrun_ccd1_acisf12161_pi14-548_pass1_cl_src4_src.pi.gz
[Mon Jan 23 19:34:33 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jan 23 19:34:33 2012] Using photon index=1.80, rate=0.0153, arf fullrun_ccd1_acisf12161_pi14-548_pass1_cl_src4.arf
[Mon Jan 23 19:34:33 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Jan 23 19:34:33 2012] Updating source flux to 1.8e-13
[Mon Jan 23 19:34:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jan 23 19:34:38 2012] acisf12161/analysis//spectral/fullrun_ccd1_acisf12161_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete