[Mon Jan 23 19:59:12 2012] Detection parameters:
  Position = (1187.3, 882.0) = 0 42 45.59 41 16 8.6
  Extent = 0.5" x 0.5", rotation angle = 64 degrees
  Source counts = 11.2 +/- 3.6
  Background counts = 1.8
  Rate = 0.003 +/- 0.0009

[Mon Jan 23 19:59:14 2012] Off-axis axis estimate = 0.67'
[Mon Jan 23 20:55:12 2012] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 20:55:12 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Mon Jan 23 20:55:12 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.911
[Mon Jan 23 20:55:12 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 0.39"
[Mon Jan 23 21:36:57 2012] fullrun_ccd3_acisf12160_pi14-548_cl_pass0_src29.ximg exists
[Mon Jan 23 21:36:57 2012] Warning: total counts is not > 0
[Mon Jan 23 21:36:57 2012] fullrun_ccd3_acisf12160_pi14-548_cl_pass0_src29_1.ximg exists
[Mon Jan 23 21:36:57 2012] Warning: total counts is not > 0
[Mon Jan 23 21:36:57 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12160_pi14-548_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12160_pi14-548_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 21:36:57 2012] fullrun_ccd3_acisf12160_pi14-548_cl_pass0_tfrozen_src29.ximg exists
[Mon Jan 23 21:36:57 2012] Warning: total counts is not > 0
[Mon Jan 23 21:36:57 2012] fullrun_ccd3_acisf12160_pi14-548_cl_pass0_tfrozen_src29_1.ximg exists
[Mon Jan 23 21:36:57 2012] Warning: total counts is not > 0
[Mon Jan 23 21:36:57 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12160_pi14-548_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12160_pi14-548_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 21:45:56 2012] Source 18 is offset by 1.171210 and 2.095288 pixels which is larger than
2 X fitted extent = 0.395359 x 0.395359, not incorporating fit results
[Mon Jan 23 21:45:56 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 21:45:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 21:45:56 2012] Assessing source extent using major
[Mon Jan 23 21:45:56 2012] Source does appear to be extended
[Mon Jan 23 21:45:56 2012] Computing asymmetry using major and minor axis, asym = 1.09
[Mon Jan 23 22:35:30 2012] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 22:35:30 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Mon Jan 23 22:35:30 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.911
[Mon Jan 23 22:35:30 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 0.39"
[Mon Jan 23 22:59:58 2012] fullrun_ccd3_acisf12160_pi14-548_cl_pass1_src19.ximg exists
[Mon Jan 23 22:59:58 2012] Warning: total counts is not > 0
[Mon Jan 23 22:59:58 2012] fullrun_ccd3_acisf12160_pi14-548_cl_pass1_src19_1.ximg exists
[Mon Jan 23 22:59:58 2012] Warning: total counts is not > 0
[Mon Jan 23 22:59:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12160_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12160_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 22:59:58 2012] fullrun_ccd3_acisf12160_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Mon Jan 23 22:59:58 2012] Warning: total counts is not > 0
[Mon Jan 23 22:59:58 2012] fullrun_ccd3_acisf12160_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Mon Jan 23 22:59:58 2012] Warning: total counts is not > 0
[Mon Jan 23 22:59:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12160_pi14-548_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12160_pi14-548_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 23:09:28 2012] Source 18 is offset by -2.864575 and -3.143981 pixels which is larger than
2 X fitted extent = 0.391732 x 0.391732, not incorporating fit results
[Mon Jan 23 23:09:28 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:09:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:09:28 2012] Assessing source extent using major
[Mon Jan 23 23:09:28 2012] Source does appear to be extended
[Mon Jan 23 23:09:28 2012] Computing asymmetry using major and minor axis, asym = 1.09
[Mon Jan 23 23:18:30 2012] Writing source region out to fullrun_ccd3_acisf12160_pi14-548_pass1_cl_src18_src.reg
[Mon Jan 23 23:18:30 2012] Extracting stamp from image fullrun_ccd3_acisf12160_pi14-548_cl_sm2.00.img.gz, (1163, 857) - (1212, 906)
[Mon Jan 23 23:18:30 2012] Writing fullrun_ccd3_acisf12160_pi14-548_pass1_cl_src18.gif
[Mon Jan 23 23:22:37 2012] ../../acisf12160/products/events/fullrun_ccd3_acisf12160_pi14-548_pass1_cl_src18_src.evt.gz[events] does not have any counts, not extracting products.
[Mon Jan 23 23:24:06 2012] No arf file found
[Mon Jan 23 23:25:30 2012] Updating aperture counts using extracted products
[Mon Jan 23 23:25:30 2012] Error reading totcts from fullrun_ccd3_acisf12160_pi14-548_pass1_cl_src18_src.pi
[Mon Jan 23 23:25:31 2012] No arf file for this source, not re-computing flux
[Mon Jan 23 23:25:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jan 23 23:25:38 2012] acisf12160/analysis//spectral/fullrun_ccd3_acisf12160_pi14-548_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete