[Mon Jan 23 19:59:11 2012] Detection parameters:
  Position = (1226.3, 872.6) = 0 42 43.88 41 16 3.9
  Extent = 0.5" x 0.5", rotation angle = 49 degrees
  Source counts = 35.7 +/- 6.2
  Background counts = 2.3
  Rate = 0.009 +/- 0.002

[Mon Jan 23 19:59:14 2012] Off-axis axis estimate = 0.36'
[Mon Jan 23 20:55:12 2012] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 20:55:12 2012] Initial guess for spatial extent in simple fitting = 0.40"
[Mon Jan 23 20:55:12 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.304
[Mon Jan 23 20:55:12 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 0.40"
[Mon Jan 23 21:36:57 2012] fullrun_ccd3_acisf12160_pi14-548_cl_pass0_src17.ximg exists
[Mon Jan 23 21:36:57 2012] Warning: total counts is not > 0
[Mon Jan 23 21:36:57 2012] fullrun_ccd3_acisf12160_pi14-548_cl_pass0_src17_1.ximg exists
[Mon Jan 23 21:36:57 2012] Warning: total counts is not > 0
[Mon Jan 23 21:36:57 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12160_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12160_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 21:36:57 2012] fullrun_ccd3_acisf12160_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Mon Jan 23 21:36:57 2012] Warning: total counts is not > 0
[Mon Jan 23 21:36:57 2012] fullrun_ccd3_acisf12160_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Jan 23 21:36:57 2012] Warning: total counts is not > 0
[Mon Jan 23 21:36:57 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12160_pi14-548_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12160_pi14-548_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 21:45:56 2012] Source 15 appears to have -ve number of counts, which is not physical
Fit may be corrupt, not incorporating results
[Mon Jan 23 21:45:56 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 21:45:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 21:45:56 2012] Assessing source extent using major
[Mon Jan 23 21:45:56 2012] Source does appear to be extended
[Mon Jan 23 21:45:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 22:35:30 2012] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 22:35:30 2012] Initial guess for spatial extent in simple fitting = 0.40"
[Mon Jan 23 22:35:30 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.304
[Mon Jan 23 22:35:30 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 0.40"
[Mon Jan 23 22:59:58 2012] fullrun_ccd3_acisf12160_pi14-548_cl_pass1_src9.ximg exists
[Mon Jan 23 22:59:58 2012] Warning: total counts is not > 0
[Mon Jan 23 22:59:58 2012] fullrun_ccd3_acisf12160_pi14-548_cl_pass1_src9_1.ximg exists
[Mon Jan 23 22:59:58 2012] Warning: total counts is not > 0
[Mon Jan 23 22:59:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12160_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12160_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 22:59:58 2012] fullrun_ccd3_acisf12160_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Mon Jan 23 22:59:58 2012] Warning: total counts is not > 0
[Mon Jan 23 22:59:58 2012] fullrun_ccd3_acisf12160_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Mon Jan 23 22:59:58 2012] Warning: total counts is not > 0
[Mon Jan 23 22:59:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12160_pi14-548_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12160_pi14-548_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 23:09:28 2012] Source 15 appears to have -ve number of counts, which is not physical
Fit may be corrupt, not incorporating results
[Mon Jan 23 23:09:28 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:09:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:09:28 2012] Assessing source extent using major
[Mon Jan 23 23:09:28 2012] Source does appear to be extended
[Mon Jan 23 23:09:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 23:18:30 2012] Writing source region out to fullrun_ccd3_acisf12160_pi14-548_pass1_cl_src15_src.reg
[Mon Jan 23 23:18:30 2012] Extracting stamp from image fullrun_ccd3_acisf12160_pi14-548_cl_sm2.00.img.gz, (1204, 850) - (1249, 895)
[Mon Jan 23 23:18:30 2012] Writing fullrun_ccd3_acisf12160_pi14-548_pass1_cl_src15.gif
[Mon Jan 23 23:21:18 2012] ../../acisf12160/products/events/fullrun_ccd3_acisf12160_pi14-548_pass1_cl_src15_src.evt.gz[events] does not have any counts, not extracting products.
[Mon Jan 23 23:24:06 2012] No arf file found
[Mon Jan 23 23:25:30 2012] Updating aperture counts using extracted products
[Mon Jan 23 23:25:30 2012] Error reading totcts from fullrun_ccd3_acisf12160_pi14-548_pass1_cl_src15_src.pi
[Mon Jan 23 23:25:31 2012] No arf file for this source, not re-computing flux
[Mon Jan 23 23:25:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jan 23 23:25:38 2012] acisf12160/analysis//spectral/fullrun_ccd3_acisf12160_pi14-548_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete