[Mon Jan 23 19:59:11 2012] Detection parameters:
  Position = (1197.7, 829.5) = 0 42 45.13 41 15 42.7
  Extent = 0.6" x 0.5", rotation angle = 113 degrees
  Source counts = 19.7 +/- 4.6
  Background counts = 1.3
  Rate = 0.005 +/- 0.001

[Mon Jan 23 19:59:14 2012] Off-axis axis estimate = 0.51'
[Mon Jan 23 20:55:12 2012] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 20:55:12 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Mon Jan 23 20:55:12 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.339
[Mon Jan 23 20:55:12 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 0.39"
[Mon Jan 23 21:36:57 2012] fullrun_ccd3_acisf12160_pi14-548_cl_pass0_src24.ximg exists
[Mon Jan 23 21:36:57 2012] Warning: total counts is not > 0
[Mon Jan 23 21:36:57 2012] fullrun_ccd3_acisf12160_pi14-548_cl_pass0_src24_1.ximg exists
[Mon Jan 23 21:36:57 2012] Warning: total counts is not > 0
[Mon Jan 23 21:36:57 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12160_pi14-548_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12160_pi14-548_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 21:36:57 2012] fullrun_ccd3_acisf12160_pi14-548_cl_pass0_tfrozen_src24.ximg exists
[Mon Jan 23 21:36:57 2012] Warning: total counts is not > 0
[Mon Jan 23 21:36:57 2012] fullrun_ccd3_acisf12160_pi14-548_cl_pass0_tfrozen_src24_1.ximg exists
[Mon Jan 23 21:36:57 2012] Warning: total counts is not > 0
[Mon Jan 23 21:36:57 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12160_pi14-548_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12160_pi14-548_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 21:45:56 2012] Source 11 is offset by 0.953159 and 2.637636 pixels which is larger than
2 X fitted extent = 0.398159 x 0.398159, not incorporating fit results
[Mon Jan 23 21:45:56 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 21:45:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 21:45:56 2012] Assessing source extent using major
[Mon Jan 23 21:45:56 2012] Source does appear to be extended
[Mon Jan 23 21:45:56 2012] Computing asymmetry using major and minor axis, asym = 1.25
[Mon Jan 23 22:35:30 2012] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 22:35:30 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Mon Jan 23 22:35:30 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.339
[Mon Jan 23 22:35:30 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 0.39"
[Mon Jan 23 22:59:58 2012] fullrun_ccd3_acisf12160_pi14-548_cl_pass1_src14.ximg exists
[Mon Jan 23 22:59:58 2012] Warning: total counts is not > 0
[Mon Jan 23 22:59:58 2012] fullrun_ccd3_acisf12160_pi14-548_cl_pass1_src14_1.ximg exists
[Mon Jan 23 22:59:58 2012] Warning: total counts is not > 0
[Mon Jan 23 22:59:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12160_pi14-548_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12160_pi14-548_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 22:59:58 2012] fullrun_ccd3_acisf12160_pi14-548_cl_pass1_tfrozen_src14.ximg exists
[Mon Jan 23 22:59:58 2012] Warning: total counts is not > 0
[Mon Jan 23 22:59:58 2012] fullrun_ccd3_acisf12160_pi14-548_cl_pass1_tfrozen_src14_1.ximg exists
[Mon Jan 23 22:59:58 2012] Warning: total counts is not > 0
[Mon Jan 23 22:59:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12160_pi14-548_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12160_pi14-548_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 23:09:28 2012] Source 11 is offset by 0.898106 and 1.775360 pixels which is larger than
2 X fitted extent = 0.398159 x 0.398159, not incorporating fit results
[Mon Jan 23 23:09:28 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:09:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:09:28 2012] Assessing source extent using major
[Mon Jan 23 23:09:28 2012] Source does appear to be extended
[Mon Jan 23 23:09:28 2012] Computing asymmetry using major and minor axis, asym = 1.25
[Mon Jan 23 23:18:30 2012] Writing source region out to fullrun_ccd3_acisf12160_pi14-548_pass1_cl_src11_src.reg
[Mon Jan 23 23:18:30 2012] Extracting stamp from image fullrun_ccd3_acisf12160_pi14-548_cl_sm2.00.img.gz, (1170, 801) - (1226, 858)
[Mon Jan 23 23:18:30 2012] Writing fullrun_ccd3_acisf12160_pi14-548_pass1_cl_src11.gif
[Mon Jan 23 23:22:18 2012] ../../acisf12160/products/events/fullrun_ccd3_acisf12160_pi14-548_pass1_cl_src11_src.evt.gz[events] does not have any counts, not extracting products.
[Mon Jan 23 23:24:06 2012] No arf file found
[Mon Jan 23 23:25:30 2012] Updating aperture counts using extracted products
[Mon Jan 23 23:25:30 2012] Error reading totcts from fullrun_ccd3_acisf12160_pi14-548_pass1_cl_src11_src.pi
[Mon Jan 23 23:25:31 2012] No arf file for this source, not re-computing flux
[Mon Jan 23 23:25:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jan 23 23:25:38 2012] acisf12160/analysis//spectral/fullrun_ccd3_acisf12160_pi14-548_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete