[Mon Jan 23 19:59:08 2012] Detection parameters:
  Position = (165.9, 608.7) = 0 42 44.90 41 11 38.3
  Extent = 0.6" x 0.5", rotation angle = 130 degrees
  Source counts = 17.7 +/- 4.2
  Background counts = 0.3
  Rate = 0.004 +/- 0.001

[Mon Jan 23 19:59:09 2012] Off-axis axis estimate = 4.21'
[Mon Jan 23 20:36:47 2012] Using EEF radius (= 0.90 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 20:36:47 2012] Initial guess for spatial extent in simple fitting = 0.90"
[Mon Jan 23 20:36:47 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.744
[Mon Jan 23 20:36:47 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 0.90"
[Mon Jan 23 20:55:12 2012] fullrun_ccd2_acisf12160_pi14-548_cl_pass0_src13.ximg exists
[Mon Jan 23 20:55:12 2012] fullrun_ccd2_acisf12160_pi14-548_cl_pass0_src13_1.ximg exists
[Mon Jan 23 20:55:12 2012] Fit fullrun_ccd2_acisf12160_pi14-548_cl_pass0_src13 appears to have run properly
[Mon Jan 23 20:55:12 2012] fullrun_ccd2_acisf12160_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Mon Jan 23 20:55:12 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf12160_pi14-548_cl_pass0_tfrozen_src13.csv
[Mon Jan 23 20:55:12 2012] fullrun_ccd2_acisf12160_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Jan 23 20:55:12 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf12160_pi14-548_cl_pass0_tfrozen_src13.csv
[Mon Jan 23 20:55:12 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12160_pi14-548_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12160_pi14-548_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 21:45:52 2012] Source 6 is offset by -7.063611 and 0.667051 pixels which is larger than
2 X fitted extent = 0.909728 x 0.909728, not incorporating fit results
[Mon Jan 23 21:45:52 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 21:45:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 21:45:52 2012] Assessing source extent using major
[Mon Jan 23 21:45:52 2012] Source does appear to be extended
[Mon Jan 23 21:45:52 2012] Computing asymmetry using major and minor axis, asym = 1.16
[Mon Jan 23 22:24:17 2012] Using EEF radius (= 0.90 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 22:24:17 2012] Initial guess for spatial extent in simple fitting = 0.90"
[Mon Jan 23 22:24:17 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.744
[Mon Jan 23 22:24:17 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 0.90"
[Mon Jan 23 22:35:30 2012] fullrun_ccd2_acisf12160_pi14-548_cl_pass1_src8.ximg exists
[Mon Jan 23 22:35:30 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf12160_pi14-548_cl_pass1_src8.csv
[Mon Jan 23 22:35:30 2012] fullrun_ccd2_acisf12160_pi14-548_cl_pass1_src8_1.ximg exists
[Mon Jan 23 22:35:30 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf12160_pi14-548_cl_pass1_src8.csv
[Mon Jan 23 22:35:30 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12160_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12160_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 22:35:30 2012] fullrun_ccd2_acisf12160_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Mon Jan 23 22:35:30 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf12160_pi14-548_cl_pass1_tfrozen_src8.csv
[Mon Jan 23 22:35:30 2012] fullrun_ccd2_acisf12160_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Mon Jan 23 22:35:30 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf12160_pi14-548_cl_pass1_tfrozen_src8.csv
[Mon Jan 23 22:35:30 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12160_pi14-548_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12160_pi14-548_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 23:09:25 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 11.310646 pixels away
[Mon Jan 23 23:09:25 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:09:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:09:25 2012] Assessing source extent using major
[Mon Jan 23 23:09:25 2012] Source does appear to be extended
[Mon Jan 23 23:09:25 2012] Computing asymmetry using major and minor axis, asym = 1.16
[Mon Jan 23 23:15:43 2012] Writing source region out to fullrun_ccd2_acisf12160_pi14-548_pass1_cl_src6_src.reg
[Mon Jan 23 23:15:43 2012] Extracting stamp from image fullrun_ccd2_acisf12160_pi14-548_cl_sm2.00.img.gz, (140, 583) - (192, 635)
[Mon Jan 23 23:15:43 2012] Writing fullrun_ccd2_acisf12160_pi14-548_pass1_cl_src6.gif
[Mon Jan 23 23:17:34 2012] ../../acisf12160/products/events/fullrun_ccd2_acisf12160_pi14-548_pass1_cl_src6_src.evt.gz[events] does not have any counts, not extracting products.
[Mon Jan 23 23:18:29 2012] No arf file found
[Mon Jan 23 23:25:30 2012] Updating aperture counts using extracted products
[Mon Jan 23 23:25:30 2012] Error reading totcts from fullrun_ccd2_acisf12160_pi14-548_pass1_cl_src6_src.pi
[Mon Jan 23 23:25:30 2012] No arf file for this source, not re-computing flux
[Mon Jan 23 23:25:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jan 23 23:25:37 2012] acisf12160/analysis//spectral/fullrun_ccd2_acisf12160_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete