[Mon Jan 23 19:59:09 2012] Detection parameters:
  Position = (176.3, 649.5) = 0 42 44.45 41 11 58.4
  Extent = 0.6" x 0.5", rotation angle = 128 degrees
  Source counts = 13.7 +/- 3.7
  Background counts = 0.3
  Rate = 0.003 +/- 0.0009

[Mon Jan 23 19:59:09 2012] Off-axis axis estimate = 3.87'
[Mon Jan 23 20:36:47 2012] Using EEF radius (= 0.79 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 20:36:47 2012] Initial guess for spatial extent in simple fitting = 0.79"
[Mon Jan 23 20:36:47 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.125
[Mon Jan 23 20:36:47 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 0.79"
[Mon Jan 23 20:55:12 2012] fullrun_ccd2_acisf12160_pi14-548_cl_pass0_src15.ximg exists
[Mon Jan 23 20:55:12 2012] Warning: total counts is not > 0
[Mon Jan 23 20:55:12 2012] fullrun_ccd2_acisf12160_pi14-548_cl_pass0_src15_1.ximg exists
[Mon Jan 23 20:55:12 2012] Warning: total counts is not > 0
[Mon Jan 23 20:55:12 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12160_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12160_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 20:55:12 2012] fullrun_ccd2_acisf12160_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Mon Jan 23 20:55:12 2012] Warning: total counts is not > 0
[Mon Jan 23 20:55:12 2012] fullrun_ccd2_acisf12160_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Mon Jan 23 20:55:12 2012] Warning: total counts is not > 0
[Mon Jan 23 20:55:12 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12160_pi14-548_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12160_pi14-548_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 21:45:52 2012] Source 15 is offset by -5.036966 and -1.687130 pixels which is larger than
2 X fitted extent = 0.804996 x 0.804996, not incorporating fit results
[Mon Jan 23 21:45:52 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 21:45:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 21:45:52 2012] Assessing source extent using major
[Mon Jan 23 21:45:52 2012] Source does appear to be extended
[Mon Jan 23 21:45:52 2012] Computing asymmetry using major and minor axis, asym = 1.26
[Mon Jan 23 22:24:17 2012] Using EEF radius (= 0.79 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 22:24:17 2012] Initial guess for spatial extent in simple fitting = 0.79"
[Mon Jan 23 22:24:17 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.125
[Mon Jan 23 22:24:17 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 0.79"
[Mon Jan 23 22:35:30 2012] fullrun_ccd2_acisf12160_pi14-548_cl_pass1_src10.ximg exists
[Mon Jan 23 22:35:30 2012] Warning: total counts is not > 0
[Mon Jan 23 22:35:30 2012] fullrun_ccd2_acisf12160_pi14-548_cl_pass1_src10_1.ximg exists
[Mon Jan 23 22:35:30 2012] Warning: total counts is not > 0
[Mon Jan 23 22:35:30 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12160_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12160_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 22:35:30 2012] fullrun_ccd2_acisf12160_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Mon Jan 23 22:35:30 2012] Warning: total counts is not > 0
[Mon Jan 23 22:35:30 2012] fullrun_ccd2_acisf12160_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Mon Jan 23 22:35:30 2012] Warning: total counts is not > 0
[Mon Jan 23 22:35:30 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12160_pi14-548_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12160_pi14-548_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 23:09:25 2012] Source 15 is offset by -0.993708 and 5.933293 pixels which is larger than
2 X fitted extent = 0.804163 x 0.804163, not incorporating fit results
[Mon Jan 23 23:09:25 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:09:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:09:25 2012] Assessing source extent using major
[Mon Jan 23 23:09:25 2012] Source does appear to be extended
[Mon Jan 23 23:09:25 2012] Computing asymmetry using major and minor axis, asym = 1.26
[Mon Jan 23 23:15:43 2012] Writing source region out to fullrun_ccd2_acisf12160_pi14-548_pass1_cl_src15_src.reg
[Mon Jan 23 23:15:43 2012] Extracting stamp from image fullrun_ccd2_acisf12160_pi14-548_cl_sm2.00.img.gz, (148, 621) - (205, 678)
[Mon Jan 23 23:15:44 2012] Writing fullrun_ccd2_acisf12160_pi14-548_pass1_cl_src15.gif
[Mon Jan 23 23:17:41 2012] ../../acisf12160/products/events/fullrun_ccd2_acisf12160_pi14-548_pass1_cl_src15_src.evt.gz[events] does not have any counts, not extracting products.
[Mon Jan 23 23:18:29 2012] No arf file found
[Mon Jan 23 23:25:30 2012] Updating aperture counts using extracted products
[Mon Jan 23 23:25:30 2012] Error reading totcts from fullrun_ccd2_acisf12160_pi14-548_pass1_cl_src15_src.pi
[Mon Jan 23 23:25:30 2012] No arf file for this source, not re-computing flux
[Mon Jan 23 23:25:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jan 23 23:25:37 2012] acisf12160/analysis//spectral/fullrun_ccd2_acisf12160_pi14-548_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete