[Mon Jan 23 19:59:06 2012] Detection parameters:
  Position = (484.3, 213.8) = 0 42 55.63 41 18 34.6
  Extent = 0.6" x 0.5", rotation angle = 8 degrees
  Source counts = 12.7 +/- 3.6
  Background counts = 0.3
  Rate = 0.003 +/- 0.0009

[Mon Jan 23 19:59:06 2012] Off-axis axis estimate = 3.70'
[Mon Jan 23 20:14:25 2012] Using EEF radius (= 0.75 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 20:14:25 2012] Initial guess for spatial extent in simple fitting = 0.75"
[Mon Jan 23 20:14:25 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.986
[Mon Jan 23 20:14:25 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 0.75"
[Mon Jan 23 20:36:47 2012] fullrun_ccd1_acisf12160_pi14-548_cl_pass0_src15.ximg exists
[Mon Jan 23 20:36:47 2012] Warning: total counts is not > 0
[Mon Jan 23 20:36:47 2012] fullrun_ccd1_acisf12160_pi14-548_cl_pass0_src15_1.ximg exists
[Mon Jan 23 20:36:47 2012] Warning: total counts is not > 0
[Mon Jan 23 20:36:47 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12160_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12160_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 20:36:47 2012] fullrun_ccd1_acisf12160_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Mon Jan 23 20:36:47 2012] Warning: total counts is not > 0
[Mon Jan 23 20:36:47 2012] fullrun_ccd1_acisf12160_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Mon Jan 23 20:36:47 2012] Warning: total counts is not > 0
[Mon Jan 23 20:36:47 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12160_pi14-548_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12160_pi14-548_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 21:45:50 2012] Source 9 is offset by 5.881157 and -1.681940 pixels which is larger than
2 X fitted extent = 0.796065 x 0.796065, not incorporating fit results
[Mon Jan 23 21:45:50 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 21:45:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 21:45:50 2012] Assessing source extent using major
[Mon Jan 23 21:45:50 2012] Source does appear to be extended
[Mon Jan 23 21:45:50 2012] Computing asymmetry using major and minor axis, asym = 1.26
[Mon Jan 23 21:59:40 2012] Using EEF radius (= 0.75 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 21:59:40 2012] Initial guess for spatial extent in simple fitting = 0.75"
[Mon Jan 23 21:59:40 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.986
[Mon Jan 23 21:59:40 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 0.75"
[Mon Jan 23 22:24:16 2012] fullrun_ccd1_acisf12160_pi14-548_cl_pass1_src12.ximg exists
[Mon Jan 23 22:24:16 2012] Warning: total counts is not > 0
[Mon Jan 23 22:24:16 2012] fullrun_ccd1_acisf12160_pi14-548_cl_pass1_src12_1.ximg exists
[Mon Jan 23 22:24:16 2012] Warning: total counts is not > 0
[Mon Jan 23 22:24:16 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12160_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12160_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 22:24:17 2012] fullrun_ccd1_acisf12160_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Mon Jan 23 22:24:17 2012] Warning: total counts is not > 0
[Mon Jan 23 22:24:17 2012] fullrun_ccd1_acisf12160_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Mon Jan 23 22:24:17 2012] Warning: total counts is not > 0
[Mon Jan 23 22:24:17 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12160_pi14-548_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12160_pi14-548_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 23:09:24 2012] Source 9 is offset by 1.769425 and 4.308593 pixels which is larger than
2 X fitted extent = 0.757126 x 0.757126, not incorporating fit results
[Mon Jan 23 23:09:24 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:09:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:09:24 2012] Assessing source extent using major
[Mon Jan 23 23:09:24 2012] Source does appear to be extended
[Mon Jan 23 23:09:24 2012] Computing asymmetry using major and minor axis, asym = 1.26
[Mon Jan 23 23:12:55 2012] Writing source region out to fullrun_ccd1_acisf12160_pi14-548_pass1_cl_src9_src.reg
[Mon Jan 23 23:12:55 2012] Extracting stamp from image fullrun_ccd1_acisf12160_pi14-548_cl_sm2.00.img.gz, (456, 185) - (513, 242)
[Mon Jan 23 23:12:55 2012] Writing fullrun_ccd1_acisf12160_pi14-548_pass1_cl_src9.gif
[Mon Jan 23 23:15:15 2012] ../../acisf12160/products/events/fullrun_ccd1_acisf12160_pi14-548_pass1_cl_src9_src.evt.gz[events] does not have any counts, not extracting products.
[Mon Jan 23 23:15:43 2012] No arf file found
[Mon Jan 23 23:25:30 2012] Updating aperture counts using extracted products
[Mon Jan 23 23:25:30 2012] Error reading totcts from fullrun_ccd1_acisf12160_pi14-548_pass1_cl_src9_src.pi
[Mon Jan 23 23:25:30 2012] No arf file for this source, not re-computing flux
[Mon Jan 23 23:25:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jan 23 23:25:36 2012] acisf12160/analysis//spectral/fullrun_ccd1_acisf12160_pi14-548_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete