[Mon Jan 23 19:59:05 2012] Detection parameters:
  Position = (837.2, 234.8) = 0 42 40.22 41 18 44.9
  Extent = 0.5" x 0.5", rotation angle = 33 degrees
  Source counts = 51.8 +/- 7.2
  Background counts = 0.2
  Rate = 0.01 +/- 0.002

[Mon Jan 23 19:59:06 2012] Off-axis axis estimate = 2.96'
[Mon Jan 23 20:14:25 2012] Using EEF radius (= 0.57 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 20:14:25 2012] Initial guess for spatial extent in simple fitting = 0.57"
[Mon Jan 23 20:14:25 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.815
[Mon Jan 23 20:14:25 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 0.57"
[Mon Jan 23 20:36:47 2012] fullrun_ccd1_acisf12160_pi14-548_cl_pass0_src6.ximg exists
[Mon Jan 23 20:36:47 2012] Warning: total counts is not > 0
[Mon Jan 23 20:36:47 2012] fullrun_ccd1_acisf12160_pi14-548_cl_pass0_src6_1.ximg exists
[Mon Jan 23 20:36:47 2012] Warning: total counts is not > 0
[Mon Jan 23 20:36:47 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12160_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12160_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 20:36:47 2012] fullrun_ccd1_acisf12160_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Mon Jan 23 20:36:47 2012] Warning: total counts is not > 0
[Mon Jan 23 20:36:47 2012] fullrun_ccd1_acisf12160_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Jan 23 20:36:47 2012] Warning: total counts is not > 0
[Mon Jan 23 20:36:47 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12160_pi14-548_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12160_pi14-548_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 21:45:50 2012] Source 6 is offset by -2.310685 and -3.694580 pixels which is larger than
2 X fitted extent = 0.580581 x 0.580581, not incorporating fit results
[Mon Jan 23 21:45:50 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 21:45:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 21:45:50 2012] Assessing source extent using major
[Mon Jan 23 21:45:50 2012] Source does appear to be extended
[Mon Jan 23 21:45:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 21:59:40 2012] Using EEF radius (= 0.57 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 21:59:40 2012] Initial guess for spatial extent in simple fitting = 0.57"
[Mon Jan 23 21:59:40 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.815
[Mon Jan 23 21:59:40 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 0.57"
[Mon Jan 23 22:24:16 2012] fullrun_ccd1_acisf12160_pi14-548_cl_pass1_src4.ximg exists
[Mon Jan 23 22:24:16 2012] Warning: total counts is not > 0
[Mon Jan 23 22:24:16 2012] fullrun_ccd1_acisf12160_pi14-548_cl_pass1_src4_1.ximg exists
[Mon Jan 23 22:24:16 2012] Warning: total counts is not > 0
[Mon Jan 23 22:24:16 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12160_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12160_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 22:24:16 2012] fullrun_ccd1_acisf12160_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Mon Jan 23 22:24:16 2012] Warning: total counts is not > 0
[Mon Jan 23 22:24:16 2012] fullrun_ccd1_acisf12160_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Mon Jan 23 22:24:16 2012] Warning: total counts is not > 0
[Mon Jan 23 22:24:16 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12160_pi14-548_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12160_pi14-548_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 23:09:24 2012] Source 6 is offset by -0.874956 and -3.386673 pixels which is larger than
2 X fitted extent = 0.580581 x 0.580581, not incorporating fit results
[Mon Jan 23 23:09:24 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:09:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:09:24 2012] Assessing source extent using major
[Mon Jan 23 23:09:24 2012] Source does appear to be extended
[Mon Jan 23 23:09:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 23:12:54 2012] Writing source region out to fullrun_ccd1_acisf12160_pi14-548_pass1_cl_src6_src.reg
[Mon Jan 23 23:12:54 2012] Extracting stamp from image fullrun_ccd1_acisf12160_pi14-548_cl_sm2.00.img.gz, (815, 212) - (860, 257)
[Mon Jan 23 23:12:54 2012] Writing fullrun_ccd1_acisf12160_pi14-548_pass1_cl_src6.gif
[Mon Jan 23 23:13:45 2012] ../../acisf12160/products/events/fullrun_ccd1_acisf12160_pi14-548_pass1_cl_src6_src.evt.gz[events] does not have any counts, not extracting products.
[Mon Jan 23 23:15:43 2012] No arf file found
[Mon Jan 23 23:25:30 2012] Updating aperture counts using extracted products
[Mon Jan 23 23:25:30 2012] Error reading totcts from fullrun_ccd1_acisf12160_pi14-548_pass1_cl_src6_src.pi
[Mon Jan 23 23:25:30 2012] No arf file for this source, not re-computing flux
[Mon Jan 23 23:25:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jan 23 23:25:36 2012] acisf12160/analysis//spectral/fullrun_ccd1_acisf12160_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete