[Mon Jan 23 19:59:02 2012] Detection parameters:
  Position = (413.5, 289.5) = 0 42 21.49 41 16 1.3
  Extent = 0.8" x 0.6", rotation angle = 36 degrees
  Source counts = 136.2 +/- 11.7
  Background counts = 1.8
  Rate = 0.03 +/- 0.003

[Mon Jan 23 19:59:04 2012] Off-axis axis estimate = 3.94'
[Mon Jan 23 20:00:48 2012] Using EEF radius (= 0.81 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 20:00:48 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jan 23 20:00:48 2012] Initial guess for spatial extent in simple fitting = 0.81"
[Mon Jan 23 20:00:48 2012] source mask rpix=1.7, npix_max = 18, mask sum = 25, frac = 1.347
[Mon Jan 23 20:00:48 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 0.81"
[Mon Jan 23 20:14:25 2012] fullrun_ccd0_acisf12160_pi14-548_cl_pass0_src2.ximg exists
[Mon Jan 23 20:14:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12160_pi14-548_cl_pass0_src2.csv
[Mon Jan 23 20:14:25 2012] fullrun_ccd0_acisf12160_pi14-548_cl_pass0_src2_1.ximg exists
[Mon Jan 23 20:14:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12160_pi14-548_cl_pass0_src2.csv
[Mon Jan 23 20:14:25 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12160_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12160_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 20:14:25 2012] fullrun_ccd0_acisf12160_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Mon Jan 23 20:14:25 2012] fullrun_ccd0_acisf12160_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Jan 23 20:14:25 2012] Fit fullrun_ccd0_acisf12160_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Mon Jan 23 21:45:48 2012] Spatial fit model total counts = 6.481030, observed total counts = 6.000000
[Mon Jan 23 21:45:48 2012] Offset between fit and detection position for source 2 = 0.207456 pixels
[Mon Jan 23 21:45:48 2012] 6.480640 total counts/ 0.000000 bgd. counts: snr = 45189627133866.679688
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.207456 pixels
  Position = (413.6, 289.3) = 0 42 21.51 41 16 1.0
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 6.5 +/- 2.5
  Background counts = 0.0
  Rate = 0.04 +/- 0.02
[Mon Jan 23 21:45:48 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 21:45:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 21:45:48 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 21:45:48 2012] Source does appear to be extended
[Mon Jan 23 21:45:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 21:46:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan 23 21:46:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jan 23 21:46:13 2012] Initial guess for spatial extent in simple fitting = 0.69"
[Mon Jan 23 21:46:13 2012] Spatial fitting skipped for pass 1: source                                 has 6.5 net counts, is at off-axis angle 3.9'
[Mon Jan 23 23:09:22 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:09:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:09:22 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 23:09:22 2012] Source does appear to be extended
[Mon Jan 23 23:09:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 23:09:45 2012] Writing source region out to fullrun_ccd0_acisf12160_pi14-548_pass1_cl_src2_src.reg
[Mon Jan 23 23:09:45 2012] Extracting stamp from image fullrun_ccd0_acisf12160_pi14-548_cl_sm2.00.img.gz, (382, 258) - (445, 321)
[Mon Jan 23 23:09:45 2012] Writing fullrun_ccd0_acisf12160_pi14-548_pass1_cl_src2.gif
[Mon Jan 23 23:10:21 2012] Size of ../../acisf12160/products/events/fullrun_ccd0_acisf12160_pi14-548_pass1_cl_src2_src.evt.gz[events] = 6 counts
[Mon Jan 23 23:10:21 2012] Mean chipx,y = (899.17, 614.17)
[Mon Jan 23 23:10:21 2012] Mean tdetx,y = (3675.17, 4232.83)
[Mon Jan 23 23:10:21 2012] chipx,y range = (886.00-916.00, 597.00-627.00)
[Mon Jan 23 23:10:21 2012] ../../acisf12160/products/events/fullrun_ccd0_acisf12160_pi14-548_pass1_cl_src2_bgd.evt.gz[events] does not have any counts, not extracting spectra.
[Mon Jan 23 23:12:54 2012] No arf file found
[Mon Jan 23 23:25:29 2012] Updating aperture counts using extracted products
[Mon Jan 23 23:25:29 2012] Error reading totcts from fullrun_ccd0_acisf12160_pi14-548_pass1_cl_src2_src.pi
[Mon Jan 23 23:25:30 2012] No arf file for this source, not re-computing flux
[Mon Jan 23 23:25:34 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jan 23 23:25:35 2012] acisf12160/analysis//spectral/fullrun_ccd0_acisf12160_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete