[Fri Feb 17 15:08:57 2012] Detection parameters:
  Position = (472.5, 700.8) = 13 25 28.68 -43 0 59.9
  Extent = 0.8" x 0.7", rotation angle = 8 degrees
  Source counts = 147.2 +/- 13.6
  Background counts = 38.8
  Rate = 0.03 +/- 0.003

[Fri Feb 17 15:08:59 2012] Off-axis axis estimate = 4.33'
[Fri Feb 17 15:23:43 2012] Using EEF radius (= 0.93 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 15:23:43 2012] Initial guess for spatial extent in simple fitting = 0.93"
[Fri Feb 17 15:23:43 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.085
[Fri Feb 17 15:23:43 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 0.93"
[Fri Feb 17 15:59:57 2012] fullrun_ccd3_acisf12155_pi14-548_cl_pass0_src4.ximg exists
[Fri Feb 17 15:59:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12155_pi14-548_cl_pass0_src4.csv
[Fri Feb 17 15:59:57 2012] fullrun_ccd3_acisf12155_pi14-548_cl_pass0_src4_1.ximg exists
[Fri Feb 17 15:59:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12155_pi14-548_cl_pass0_src4.csv
[Fri Feb 17 15:59:57 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12155_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12155_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 15:59:57 2012] fullrun_ccd3_acisf12155_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Fri Feb 17 15:59:57 2012] fullrun_ccd3_acisf12155_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Feb 17 15:59:57 2012] Fit fullrun_ccd3_acisf12155_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Feb 17 16:00:05 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.317801 pixels away
[Fri Feb 17 16:00:05 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 16:00:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 16:00:05 2012] Assessing source extent using major
[Fri Feb 17 16:00:05 2012] Source does appear to be extended
[Fri Feb 17 16:00:05 2012] Computing asymmetry using major and minor axis, asym = 1.19
[Fri Feb 17 16:13:03 2012] Using EEF radius (= 0.93 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 16:13:03 2012] Initial guess for spatial extent in simple fitting = 0.93"
[Fri Feb 17 16:13:03 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.085
[Fri Feb 17 16:13:03 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 0.93"
[Fri Feb 17 16:33:10 2012] fullrun_ccd3_acisf12155_pi14-548_cl_pass1_src4.ximg exists
[Fri Feb 17 16:33:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12155_pi14-548_cl_pass1_src4.csv
[Fri Feb 17 16:33:10 2012] fullrun_ccd3_acisf12155_pi14-548_cl_pass1_src4_1.ximg exists
[Fri Feb 17 16:33:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12155_pi14-548_cl_pass1_src4.csv
[Fri Feb 17 16:33:10 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12155_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12155_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 16:33:10 2012] fullrun_ccd3_acisf12155_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Fri Feb 17 16:33:10 2012] fullrun_ccd3_acisf12155_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Feb 17 16:33:10 2012] Fit fullrun_ccd3_acisf12155_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Feb 17 16:33:15 2012] Spatial fit model total counts = 204.388000, observed total counts = 204.000000
[Fri Feb 17 16:33:15 2012] Offset between fit and detection position for source 3 = 1.223928 pixels
[Fri Feb 17 16:33:15 2012] 204.580700 total counts/ 31.827700 bgd. counts: snr = 30.621254
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.223928 pixels
  Position = (472.1, 701.9) = 13 25 28.72 -43 0 59.6
  Extent = 1.5 (1.2-1.7)", rotation angle = 0
  Source counts = 172.8 +/- 14.3
  Background counts = 31.8
  Rate = 0.03 +/- 0.003
[Fri Feb 17 16:33:15 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 16:33:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 16:33:15 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 16:33:15 2012] Source does appear to be extended
[Fri Feb 17 16:33:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 16:46:46 2012] Writing source region out to fullrun_ccd3_acisf12155_pi14-548_pass1_cl_src3_src.reg
[Fri Feb 17 16:46:46 2012] Extracting stamp from image fullrun_ccd3_acisf12155_pi14-548_cl_sm2.00.img.gz, (405, 634) - (540, 769)
[Fri Feb 17 16:46:46 2012] Writing fullrun_ccd3_acisf12155_pi14-548_pass1_cl_src3.gif
[Fri Feb 17 16:48:35 2012] Size of ../../acisf12155/products/events/fullrun_ccd3_acisf12155_pi14-548_pass1_cl_src3_src.evt.gz[events] = 275 counts
[Fri Feb 17 16:48:35 2012] Mean chipx,y = (569.24, 654.62)
[Fri Feb 17 16:48:35 2012] Mean tdetx,y = (4477.38, 3630.24)
[Fri Feb 17 16:48:35 2012] chipx,y range = (544.00-594.00, 629.00-680.00)
[Fri Feb 17 16:48:35 2012] Size of ../../acisf12155/products/events/fullrun_ccd3_acisf12155_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 918 counts
[Fri Feb 17 16:48:36 2012] rmf not found, will run specextract
[Fri Feb 17 16:48:36 2012] arf not found, will run specextract
[Fri Feb 17 16:49:01 2012] ../../acisf12155/products/spectra/fullrun_ccd3_acisf12155_pi14-548_pass1_cl_src3.warf not found
[Fri Feb 17 16:49:01 2012] ../../acisf12155/products/spectra/fullrun_ccd3_acisf12155_pi14-548_pass1_cl_src3.wrmf not found
[Fri Feb 17 16:49:01 2012] Removal of ../../acisf12155/products/spectra/fullrun_ccd3_acisf12155_pi14-548_pass1_cl_src3.soff failed
[Fri Feb 17 16:54:45 2012] Keeping rmf generated by specextract
[Fri Feb 17 16:54:45 2012] 187.292
[Fri Feb 17 16:54:48 2012] Updating aperture counts using extracted products
[Fri Feb 17 16:54:48 2012] Error reading totcts from fullrun_ccd3_acisf12155_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Feb 17 16:54:48 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 16:54:48 2012] Using photon index=1.80, rate=0.0346, arf fullrun_ccd3_acisf12155_pi14-548_pass1_cl_src3.arf
[Fri Feb 17 16:54:48 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 17 16:54:48 2012] Updating source flux to 4.2e-13