[Fri Aug 31 00:39:17 2012] Detection parameters:
  Position = (648.2, 138.8) = 3 9 40.62 -20 34 57.5
  Extent = 0.5" x 0.5", rotation angle = 101 degrees
  Source counts = 203.6 +/- 14.3
  Background counts = 1.4
  Rate = 0.004 +/- 0.0003

[Fri Aug 31 00:39:18 2012] Off-axis axis estimate = 1.58'
[Fri Aug 31 00:40:10 2012] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 00:40:10 2012] Initial guess for spatial extent in simple fitting = 0.40"
[Fri Aug 31 00:40:10 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.878
[Fri Aug 31 00:40:10 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.40"
[Fri Aug 31 00:40:10 2012] fullrun_ccd2_acisf12153_pi14-548_cl_pass0_src1.ximg exists
[Fri Aug 31 00:40:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12153_pi14-548_cl_pass0_src1.csv
[Fri Aug 31 00:40:11 2012] fullrun_ccd2_acisf12153_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Aug 31 00:40:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12153_pi14-548_cl_pass0_src1.csv
[Fri Aug 31 00:40:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12153_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12153_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 00:40:11 2012] fullrun_ccd2_acisf12153_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug 31 00:40:11 2012] fullrun_ccd2_acisf12153_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug 31 00:40:11 2012] Fit fullrun_ccd2_acisf12153_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Aug 31 00:40:26 2012] Spatial fit model total counts = 214.527000, observed total counts = 215.000000
[Fri Aug 31 00:40:26 2012] Offset between fit and detection position for source 2 = 0.683486 pixels
[Fri Aug 31 00:40:26 2012] 213.555500 total counts/ 14.866500 bgd. counts: snr = 51.531105
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.683486 pixels
  Position = (648.7, 139.3) = 3 9 40.62 -20 34 57.5
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 198.7 +/- 14.6
  Background counts = 14.9
  Rate = 0.004 +/- 0.0003
[Fri Aug 31 00:40:26 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 00:40:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 00:40:26 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 00:40:26 2012] Source does appear to be extended
[Fri Aug 31 00:40:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 00:40:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 31 00:40:51 2012] Initial guess for spatial extent in simple fitting = 0.43"
[Fri Aug 31 00:40:51 2012] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.193
[Fri Aug 31 00:40:51 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.43"
[Fri Aug 31 00:40:52 2012] fullrun_ccd2_acisf12153_pi14-548_cl_pass1_src1.ximg exists
[Fri Aug 31 00:40:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12153_pi14-548_cl_pass1_src1.csv
[Fri Aug 31 00:40:52 2012] fullrun_ccd2_acisf12153_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Aug 31 00:40:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12153_pi14-548_cl_pass1_src1.csv
[Fri Aug 31 00:40:52 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12153_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12153_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 00:40:52 2012] fullrun_ccd2_acisf12153_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug 31 00:40:52 2012] fullrun_ccd2_acisf12153_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug 31 00:40:52 2012] Fit fullrun_ccd2_acisf12153_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Aug 31 00:41:07 2012] Spatial fit model total counts = 214.884000, observed total counts = 215.000000
[Fri Aug 31 00:41:07 2012] Offset between fit and detection position for source 2 = 0.001989 pixels
[Fri Aug 31 00:41:07 2012] 213.633100 total counts/ 14.893100 bgd. counts: snr = 51.498281
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.001989 pixels
  Position = (648.7, 139.3) = 3 9 40.62 -20 34 57.5
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 198.7 +/- 14.6
  Background counts = 14.9
  Rate = 0.004 +/- 0.0003
[Fri Aug 31 00:41:07 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 00:41:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 00:41:07 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 00:41:07 2012] Source does appear to be extended
[Fri Aug 31 00:41:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 00:44:06 2012] Not overwriting source region fullrun_ccd2_acisf12153_pi14-548_pass1_cl_src2_src.reg
[Fri Aug 31 00:44:06 2012] Extracting stamp from image fullrun_ccd2_acisf12153_pi14-548_cl_sm2.00.img.gz, (629, 120) - (668, 159)
[Fri Aug 31 00:44:06 2012] Writing fullrun_ccd2_acisf12153_pi14-548_pass1_cl_src2.gif
[Fri Aug 31 00:44:08 2012] ../../acisf12153/products/events/fullrun_ccd2_acisf12153_pi14-548_pass1_cl_src2_src.evt and ../../acisf12153/products/events/fullrun_ccd2_acisf12153_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Aug 31 00:44:08 2012] Size of ../../acisf12153/products/events/fullrun_ccd2_acisf12153_pi14-548_pass1_cl_src2_src.evt.gz[events] = 202 counts
[Fri Aug 31 00:44:08 2012] Mean chipx,y = (259.80, 981.02)
[Fri Aug 31 00:44:08 2012] Mean tdetx,y = (4042.02, 3826.20)
[Fri Aug 31 00:44:08 2012] chipx,y range = (243.00-279.00, 962.00-998.00)
[Fri Aug 31 00:44:08 2012] Size of ../../acisf12153/products/events/fullrun_ccd2_acisf12153_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 14 counts
[Fri Aug 31 00:44:08 2012] ../../acisf12153/products/images/fullrun_ccd2_acisf12153_pi14-548_pass1_cl_src2_src.img and ../../acisf12153/products/images/fullrun_ccd2_acisf12153_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Aug 31 00:44:08 2012] ../../acisf12153/products/spectra/fullrun_ccd2_acisf12153_pi14-548_pass1_cl_src2_src.pi and ../../acisf12153/products/spectra/fullrun_ccd2_acisf12153_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri Aug 31 00:44:11 2012] ../../acisf12153/products/lightcurves/fullrun_ccd2_acisf12153_pi14-548_pass1_cl_src2_src.lc and ../../acisf12153/products/lightcurves/fullrun_ccd2_acisf12153_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Aug 31 00:45:34 2012] Keeping rmf generated by specextract
[Fri Aug 31 00:45:34 2012] 189.916
[Fri Aug 31 00:46:50 2012] Updating aperture counts using extracted products
[Fri Aug 31 00:46:50 2012] Error reading totcts from fullrun_ccd2_acisf12153_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Aug 31 00:46:50 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 31 00:46:50 2012] Using photon index=1.80, rate=0.0041, arf fullrun_ccd2_acisf12153_pi14-548_pass1_cl_src2.arf
[Fri Aug 31 00:46:50 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Aug 31 00:46:50 2012] Updating source flux to 5e-14
[Fri Aug 31 00:47:13 2012] Reading fit data from acisf12153/analysis//spectral/fullrun_ccd2_acisf12153_pi14-548_pass1_cl_src2_pl.csv
[Fri Aug 31 00:47:13 2012] Spectral fit parameter nH value = 2.24027e+21
[Fri Aug 31 00:47:13 2012] Spectral fit parameter PhoIndex value = 1.98676
[Fri Aug 31 00:47:13 2012] Failed to get F(0.3-8.0) from acisf12153/analysis//spectral/fullrun_ccd2_acisf12153_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Aug 31 00:47:13 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 31 00:47:13 2012] Using Nh = 2.2e+21, photon index=1.99, rate=0.0041, arf fullrun_ccd2_acisf12153_pi14-548_pass1_cl_src2.arf
[Fri Aug 31 00:47:13 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Aug 31 00:47:13 2012] Updating source flux to 4.6e-14