[Fri Aug 31 00:39:17 2012] Detection parameters:
  Position = (401.8, 189.3) = 3 9 49.26 -20 34 32.7
  Extent = 0.5" x 0.5", rotation angle = 21 degrees
  Source counts = 15.1 +/- 4.0
  Background counts = 0.9
  Rate = 0.0003 +/- 8e-05

[Fri Aug 31 00:39:18 2012] Off-axis axis estimate = 1.70'
[Fri Aug 31 00:40:10 2012] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 00:40:10 2012] Initial guess for spatial extent in simple fitting = 0.40"
[Fri Aug 31 00:40:10 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.286
[Fri Aug 31 00:40:10 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 0.40"
[Fri Aug 31 00:40:11 2012] fullrun_ccd2_acisf12153_pi14-548_cl_pass0_src13.ximg exists
[Fri Aug 31 00:40:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12153_pi14-548_cl_pass0_src13.csv
[Fri Aug 31 00:40:11 2012] fullrun_ccd2_acisf12153_pi14-548_cl_pass0_src13_1.ximg exists
[Fri Aug 31 00:40:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12153_pi14-548_cl_pass0_src13.csv
[Fri Aug 31 00:40:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12153_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12153_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 00:40:11 2012] fullrun_ccd2_acisf12153_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Fri Aug 31 00:40:11 2012] fullrun_ccd2_acisf12153_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Aug 31 00:40:11 2012] Fit fullrun_ccd2_acisf12153_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Aug 31 00:40:26 2012] Spatial fit model total counts = 20.687800, observed total counts = 21.000000
[Fri Aug 31 00:40:26 2012] Offset between fit and detection position for source 10 = 0.904062 pixels
[Fri Aug 31 00:40:26 2012] 20.211570 total counts/ 5.692870 bgd. counts: snr = 6.085021
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.904062 pixels
  Position = (402.5, 189.9) = 3 9 49.25 -20 34 32.6
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 14.5 +/- 4.5
  Background counts = 5.7
  Rate = 0.0003 +/- 9e-05
[Fri Aug 31 00:40:26 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 00:40:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 00:40:26 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 00:40:26 2012] Source does appear to be extended
[Fri Aug 31 00:40:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 00:40:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 31 00:40:51 2012] Initial guess for spatial extent in simple fitting = 0.36"
[Fri Aug 31 00:40:51 2012] source mask rpix=0.7, npix_max = 5, mask sum = 6, frac = 1.003
[Fri Aug 31 00:40:51 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 0.36"
[Fri Aug 31 00:40:52 2012] fullrun_ccd2_acisf12153_pi14-548_cl_pass1_src12.ximg exists
[Fri Aug 31 00:40:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12153_pi14-548_cl_pass1_src12.csv
[Fri Aug 31 00:40:52 2012] fullrun_ccd2_acisf12153_pi14-548_cl_pass1_src12_1.ximg exists
[Fri Aug 31 00:40:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12153_pi14-548_cl_pass1_src12.csv
[Fri Aug 31 00:40:52 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12153_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12153_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 00:40:52 2012] fullrun_ccd2_acisf12153_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Fri Aug 31 00:40:52 2012] fullrun_ccd2_acisf12153_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Aug 31 00:40:52 2012] Fit fullrun_ccd2_acisf12153_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Fri Aug 31 00:41:07 2012] Spatial fit model total counts = 20.638200, observed total counts = 21.000000
[Fri Aug 31 00:41:07 2012] Offset between fit and detection position for source 10 = 0.000982 pixels
[Fri Aug 31 00:41:07 2012] 19.992920 total counts/ 5.263420 bgd. counts: snr = 6.420280
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.000982 pixels
  Position = (402.5, 189.9) = 3 9 49.25 -20 34 32.6
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 14.7 +/- 4.5
  Background counts = 5.3
  Rate = 0.0003 +/- 9e-05
[Fri Aug 31 00:41:07 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 00:41:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 00:41:07 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 00:41:07 2012] Source does appear to be extended
[Fri Aug 31 00:41:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 00:44:07 2012] Not overwriting source region fullrun_ccd2_acisf12153_pi14-548_pass1_cl_src10_src.reg
[Fri Aug 31 00:44:07 2012] Extracting stamp from image fullrun_ccd2_acisf12153_pi14-548_cl_sm2.00.img.gz, (386, 174) - (419, 206)
[Fri Aug 31 00:44:07 2012] Writing fullrun_ccd2_acisf12153_pi14-548_pass1_cl_src10.gif
[Fri Aug 31 00:44:46 2012] ../../acisf12153/products/events/fullrun_ccd2_acisf12153_pi14-548_pass1_cl_src10_src.evt and ../../acisf12153/products/events/fullrun_ccd2_acisf12153_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Fri Aug 31 00:44:46 2012] Size of ../../acisf12153/products/events/fullrun_ccd2_acisf12153_pi14-548_pass1_cl_src10_src.evt.gz[events] = 15 counts
[Fri Aug 31 00:44:46 2012] Mean chipx,y = (58.13, 833.73)
[Fri Aug 31 00:44:46 2012] Mean tdetx,y = (3894.73, 4027.87)
[Fri Aug 31 00:44:46 2012] chipx,y range = (41.00-72.00, 816.00-848.00)
[Fri Aug 31 00:44:46 2012] Size of ../../acisf12153/products/events/fullrun_ccd2_acisf12153_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 5 counts
[Fri Aug 31 00:44:46 2012] ../../acisf12153/products/images/fullrun_ccd2_acisf12153_pi14-548_pass1_cl_src10_src.img and ../../acisf12153/products/images/fullrun_ccd2_acisf12153_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Fri Aug 31 00:44:46 2012] ../../acisf12153/products/spectra/fullrun_ccd2_acisf12153_pi14-548_pass1_cl_src10_src.pi and ../../acisf12153/products/spectra/fullrun_ccd2_acisf12153_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Fri Aug 31 00:44:46 2012] Not generating rmf since there are only 14 counts
[Fri Aug 31 00:44:48 2012] ../../acisf12153/products/lightcurves/fullrun_ccd2_acisf12153_pi14-548_pass1_cl_src10_src.lc and ../../acisf12153/products/lightcurves/fullrun_ccd2_acisf12153_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Fri Aug 31 00:45:35 2012] 200.579
[Fri Aug 31 00:46:50 2012] Updating aperture counts using extracted products
[Fri Aug 31 00:46:50 2012] Error reading totcts from fullrun_ccd2_acisf12153_pi14-548_pass1_cl_src10_src.pi.gz
[Fri Aug 31 00:46:50 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 31 00:46:50 2012] Using photon index=1.80, rate=0.000304, arf fullrun_ccd2_acisf12153_pi14-548_pass1_cl_src10.arf
[Fri Aug 31 00:46:50 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Aug 31 00:46:50 2012] Updating source flux to 3.5e-15
[Fri Aug 31 00:47:09 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting