[Fri Jul  6 05:57:29 2012] Detection parameters:
  Position = (428.2, 1014.0) = 10 24 0.18 -57 43 12.9
  Extent = 1.5" x 1.4", rotation angle = 101 degrees
  Source counts = 10.3 +/- 3.5
  Background counts = 1.7
  Rate = 0.001 +/- 0.0003

[Fri Jul  6 05:57:29 2012] Off-axis axis estimate = 8.51'
[Fri Jul  6 06:03:19 2012] Using EEF radius (= 3.20 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 06:03:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul  6 06:03:19 2012] Initial guess for spatial extent in simple fitting = 3.20"
[Fri Jul  6 06:03:19 2012] source mask rpix=6.5, npix_max = 196, mask sum = 188, frac = 0.959
[Fri Jul  6 06:03:19 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 3.20"
[Fri Jul  6 06:24:59 2012] fullrun_ccd3_acisf12151_pi14-548_cl_pass0_src13.ximg exists
[Fri Jul  6 06:24:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12151_pi14-548_cl_pass0_src13.csv
[Fri Jul  6 06:24:59 2012] fullrun_ccd3_acisf12151_pi14-548_cl_pass0_src13_1.ximg exists
[Fri Jul  6 06:24:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12151_pi14-548_cl_pass0_src13.csv
[Fri Jul  6 06:24:59 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12151_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12151_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 06:24:59 2012] fullrun_ccd3_acisf12151_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Fri Jul  6 06:24:59 2012] fullrun_ccd3_acisf12151_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Jul  6 06:24:59 2012] Fit fullrun_ccd3_acisf12151_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Jul  6 06:41:05 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 37.600789 pixels away
[Fri Jul  6 06:41:05 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 06:41:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 06:41:05 2012] Assessing source extent using major
[Fri Jul  6 06:41:05 2012] Source does appear to be extended
[Fri Jul  6 06:41:05 2012] Computing asymmetry using major and minor axis, asym = 1.09
[Fri Jul  6 06:44:16 2012] Using EEF radius (= 3.20 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 06:44:16 2012] Initial guess for spatial extent in simple fitting = 3.20"
[Fri Jul  6 06:44:16 2012] source mask rpix=6.5, npix_max = 196, mask sum = 188, frac = 0.959
[Fri Jul  6 06:44:16 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 3.20"
[Fri Jul  6 07:05:16 2012] fullrun_ccd3_acisf12151_pi14-548_cl_pass1_src13.ximg exists
[Fri Jul  6 07:05:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12151_pi14-548_cl_pass1_src13.csv
[Fri Jul  6 07:05:16 2012] fullrun_ccd3_acisf12151_pi14-548_cl_pass1_src13_1.ximg exists
[Fri Jul  6 07:05:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12151_pi14-548_cl_pass1_src13.csv
[Fri Jul  6 07:05:16 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12151_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12151_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 07:05:16 2012] fullrun_ccd3_acisf12151_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Fri Jul  6 07:05:16 2012] fullrun_ccd3_acisf12151_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Jul  6 07:05:16 2012] Fit fullrun_ccd3_acisf12151_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Jul  6 07:23:30 2012] Spatial fit model total counts = 11.219400, observed total counts = 13.000000
[Fri Jul  6 07:23:30 2012] Offset between fit and detection position for source 25 = 0.933237 pixels
[Fri Jul  6 07:23:30 2012] 11.213925 total counts/ 0.423525 bgd. counts: snr = 16.580515
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.933237 pixels
  Position = (429.1, 1014.1) = 10 24 0.16 -57 43 13.1
  Extent = 1.5 (1.1-3.0)" x 1.5 (1.3-3.0)", rotation angle = 0 (264-0) degrees
  Source counts = 10.8 +/- 3.3
  Background counts = 0.4
  Rate = 0.001 +/- 0.0003
[Fri Jul  6 07:23:30 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 07:23:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 07:23:30 2012] Assessing source extent using major axis lower bound
[Fri Jul  6 07:23:30 2012] Source does appear to be extended
[Fri Jul  6 07:23:30 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.37
[Fri Jul  6 07:33:09 2012] Writing source region out to fullrun_ccd3_acisf12151_pi14-548_pass1_cl_src25_src.reg
[Fri Jul  6 07:33:09 2012] Extracting stamp from image fullrun_ccd3_acisf12151_pi14-548_cl_sm2.00.img.gz, (360, 946) - (498, 1083)
[Fri Jul  6 07:33:09 2012] Writing fullrun_ccd3_acisf12151_pi14-548_pass1_cl_src25.gif
[Fri Jul  6 07:39:05 2012] Size of ../../acisf12151/products/events/fullrun_ccd3_acisf12151_pi14-548_pass1_cl_src25_src.evt.gz[events] = 13 counts
[Fri Jul  6 07:39:05 2012] Mean chipx,y = (481.38, 98.85)
[Fri Jul  6 07:39:05 2012] Mean tdetx,y = (5033.15, 3542.38)
[Fri Jul  6 07:39:05 2012] chipx,y range = (461.00-497.00, 81.00-115.00)
[Fri Jul  6 07:39:05 2012] Size of ../../acisf12151/products/events/fullrun_ccd3_acisf12151_pi14-548_pass1_cl_src25_bgd.evt.gz[events] = 12 counts
[Fri Jul  6 07:39:06 2012] Not generating rmf since there are only 10 counts
[Fri Jul  6 07:39:06 2012] arf not found, will run specextract
[Fri Jul  6 07:39:17 2012] ../../acisf12151/products/spectra/fullrun_ccd3_acisf12151_pi14-548_pass1_cl_src25.warf not found
[Fri Jul  6 07:39:17 2012] ../../acisf12151/products/spectra/fullrun_ccd3_acisf12151_pi14-548_pass1_cl_src25.wrmf not found
[Fri Jul  6 07:39:17 2012] Removal of ../../acisf12151/products/spectra/fullrun_ccd3_acisf12151_pi14-548_pass1_cl_src25.soff failed
[Fri Jul  6 07:39:24 2012] Spectrum 25 has only 11 counts, deleting rmf
[Fri Jul  6 07:39:24 2012] 156.142
[Fri Jul  6 07:40:14 2012] Updating aperture counts using extracted products
[Fri Jul  6 07:40:14 2012] Error reading totcts from fullrun_ccd3_acisf12151_pi14-548_pass1_cl_src25_src.pi.gz
[Fri Jul  6 07:40:14 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 07:40:14 2012] Using photon index=1.80, rate=0.00109, arf fullrun_ccd3_acisf12151_pi14-548_pass1_cl_src25.arf
[Fri Jul  6 07:40:14 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jul  6 07:40:14 2012] Updating source flux to 2.1e-14
[Fri Jul  6 07:40:19 2012] Source 25 has fewer than 100.000000 counts, skipping spectral fitting