[Thu May  2 14:06:26 2013] Detection parameters:
  Position = (354.7, 632.9) = 10 28 33.37 -58 11 31.1
  Extent = 0.8" x 0.7", rotation angle = 113 degrees
  Source counts = 10.2 +/- 3.3
  Background counts = 0.8
  Rate = 0.001 +/- 0.0003

[Thu May  2 14:06:26 2013] Off-axis axis estimate = 6.00'
[Thu May  2 14:10:19 2013] Using EEF radius (= 1.63 ")to estimate initial spatial extent for simple fitting
[Thu May  2 14:10:19 2013] Initial guess for spatial extent in simple fitting = 1.63"
[Thu May  2 14:10:19 2013] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.964
[Thu May  2 14:10:19 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 1.63"
[Thu May  2 14:13:51 2013] fullrun_ccd0_acisf12150_pi14-548_cl_pass0_src2.ximg exists
[Thu May  2 14:13:51 2013] fullrun_ccd0_acisf12150_pi14-548_cl_pass0_src2_1.ximg exists
[Thu May  2 14:13:51 2013] Fit fullrun_ccd0_acisf12150_pi14-548_cl_pass0_src2 appears to have run properly
[Thu May  2 14:13:51 2013] fullrun_ccd0_acisf12150_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Thu May  2 14:13:51 2013] fullrun_ccd0_acisf12150_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Thu May  2 14:13:51 2013] Fit fullrun_ccd0_acisf12150_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Thu May  2 14:43:47 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 18.348043 pixels away
[Thu May  2 14:43:47 2013] Vigneting correction estimate = 1.000000
[Thu May  2 14:43:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 14:43:47 2013] Assessing source extent using major
[Thu May  2 14:43:47 2013] Source does appear to be extended
[Thu May  2 14:43:47 2013] Computing asymmetry using major and minor axis, asym = 1.15
[Thu May  2 14:44:00 2013] Using EEF radius (= 1.63 ")to estimate initial spatial extent for simple fitting
[Thu May  2 14:44:00 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  2 14:44:00 2013] Initial guess for spatial extent in simple fitting = 1.63"
[Thu May  2 14:44:00 2013] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.964
[Thu May  2 14:44:00 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 1.63"
[Thu May  2 14:47:24 2013] fullrun_ccd0_acisf12150_pi14-548_cl_pass1_src2.ximg exists
[Thu May  2 14:47:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12150_pi14-548_cl_pass1_src2.csv
[Thu May  2 14:47:24 2013] fullrun_ccd0_acisf12150_pi14-548_cl_pass1_src2_1.ximg exists
[Thu May  2 14:47:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12150_pi14-548_cl_pass1_src2.csv
[Thu May  2 14:47:24 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12150_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12150_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 14:47:24 2013] fullrun_ccd0_acisf12150_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Thu May  2 14:47:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12150_pi14-548_cl_pass1_tfrozen_src2.csv
[Thu May  2 14:47:24 2013] fullrun_ccd0_acisf12150_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Thu May  2 14:47:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12150_pi14-548_cl_pass1_tfrozen_src2.csv
[Thu May  2 14:47:24 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12150_pi14-548_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12150_pi14-548_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 15:21:14 2013] Spatial fit model total counts = 10.911200, observed total counts = 12.000000
[Thu May  2 15:21:14 2013] Offset between fit and detection position for source 3 = 0.780720 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.780720 pixels
  Position = (355.3, 633.3) = 10 28 33.36 -58 11 31.1
  Extent = 1.1 (0.8-1.4)", rotation angle = 0
  Source counts = 10.8 +/- 3.3
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Thu May  2 15:21:14 2013] Vigneting correction estimate = 1.000000
[Thu May  2 15:21:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 15:21:14 2013] Assessing source extent using major axis lower bound
[Thu May  2 15:21:14 2013] Source does appear to be extended
[Thu May  2 15:21:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 15:21:27 2013] Writing source region out to fullrun_ccd0_acisf12150_pi14-548_pass1_cl_src3_src.reg
[Thu May  2 15:21:27 2013] Extracting stamp from image fullrun_ccd0_acisf12150_pi14-548_cl_sm2.00.img.gz, (307, 585) - (404, 682)
[Thu May  2 15:21:27 2013] Writing fullrun_ccd0_acisf12150_pi14-548_pass1_cl_src3.gif
[Thu May  2 15:22:39 2013] Size of ../../acisf12150/products/events/fullrun_ccd0_acisf12150_pi14-548_pass1_cl_src3_src.evt.gz[events] = 11 counts
[Thu May  2 15:22:39 2013] Mean chipx,y = (437.00, 785.73)
[Thu May  2 15:22:39 2013] Mean tdetx,y = (3846.73, 4695.00)
[Thu May  2 15:22:39 2013] chipx,y range = (419.00-453.00, 775.00-795.00)
[Thu May  2 15:22:39 2013] Size of ../../acisf12150/products/events/fullrun_ccd0_acisf12150_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 13 counts
[Thu May  2 15:22:40 2013] Not generating rmf since there are only 10 counts
[Thu May  2 15:22:40 2013] arf not found, will run specextract
[Thu May  2 15:23:07 2013] ../../acisf12150/products/spectra/fullrun_ccd0_acisf12150_pi14-548_pass1_cl_src3.warf not found
[Thu May  2 15:23:07 2013] ../../acisf12150/products/spectra/fullrun_ccd0_acisf12150_pi14-548_pass1_cl_src3.wrmf not found
[Thu May  2 15:23:07 2013] Removal of ../../acisf12150/products/spectra/fullrun_ccd0_acisf12150_pi14-548_pass1_cl_src3.soff failed
[Thu May  2 15:24:47 2013] Spectrum 3 has only 11 counts, deleting rmf
[Thu May  2 15:24:47 2013] 182.428
[Thu May  2 15:35:12 2013] Updating aperture counts using extracted products
[Thu May  2 15:35:12 2013] Total counts from fullrun_ccd0_acisf12150_pi14-548_pass1_cl_src3_src.pi.gz = 11.00
[Thu May  2 15:35:12 2013] Total counts from fullrun_ccd0_acisf12150_pi14-548_pass1_cl_src3_bgd.pi.gz = 13.00
[Thu May  2 15:35:12 2013] Got source and background scale factors 0.000004, 0.000040
[Thu May  2 15:35:12 2013] User source parameters:
  Position = (355.3, 633.3) = 10 28 33.36 -58 11 31.1
  Extent = 1.1 (0.8-1.4)", rotation angle = 0
  Source aperture counts = 9.9 +/- 4.4
  Background aperture counts = 1.1
  Rate = 0.001 +/- 0.0004

[Thu May  2 15:35:13 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 15:35:13 2013] Using photon index=1.80, rate=0.00108, arf fullrun_ccd0_acisf12150_pi14-548_pass1_cl_src3.arf
[Thu May  2 15:35:13 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu May  2 15:35:13 2013] Updating source flux to 1.8e-14
[Thu May  2 15:35:17 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May  2 15:35:18 2013] acisf12150/analysis//spectral/fullrun_ccd0_acisf12150_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete