[Sat May 11 10:49:13 2013] Detection parameters:
  Position = (287.9, 783.0) = 19 54 24.24 28 42 51.1
  Extent = 1.4" x 0.8", rotation angle = 166 degrees
  Source counts = 18.8 +/- 4.5
  Background counts = 1.2
  Rate = 0.002 +/- 0.0005

[Sat May 11 10:49:13 2013] Off-axis axis estimate = 6.00'
[Sat May 11 11:01:10 2013] Using EEF radius (= 1.63 ")to estimate initial spatial extent for simple fitting
[Sat May 11 11:01:10 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 11 11:01:10 2013] Initial guess for spatial extent in simple fitting = 1.63"
[Sat May 11 11:01:10 2013] source mask rpix=3.3, npix_max = 58, mask sum = 64, frac = 1.103
[Sat May 11 11:01:10 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 1.63"
[Sat May 11 11:03:50 2013] fullrun_ccd3_acisf12148_pi14-548_cl_pass0_src1.ximg exists
[Sat May 11 11:03:50 2013] fullrun_ccd3_acisf12148_pi14-548_cl_pass0_src1_1.ximg exists
[Sat May 11 11:03:50 2013] Fit fullrun_ccd3_acisf12148_pi14-548_cl_pass0_src1 appears to have run properly
[Sat May 11 11:03:50 2013] fullrun_ccd3_acisf12148_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat May 11 11:03:50 2013] fullrun_ccd3_acisf12148_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat May 11 11:03:50 2013] Fit fullrun_ccd3_acisf12148_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat May 11 11:03:54 2013] Spatial fit model total counts = 23.743400, observed total counts = 24.000000
[Sat May 11 11:03:54 2013] Offset between fit and detection position for source 1 = 0.842224 pixels
[Sat May 11 11:03:54 2013] 23.798050 total counts/ 6.038750 bgd. counts: snr = 7.226905
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.842224 pixels
  Position = (287.9, 783.8) = 19 54 24.26 28 42 51.3
  Extent = 1.7 (0.7-2.0)" x 0.9 (0.6-1.4)", rotation angle = 0 (321-45) degrees
  Source counts = 17.8 +/- 4.9
  Background counts = 6.0
  Rate = 0.002 +/- 0.0005
[Sat May 11 11:03:54 2013] Vigneting correction estimate = 1.000000
[Sat May 11 11:03:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 11:03:54 2013] Assessing source extent using major axis lower bound
[Sat May 11 11:03:54 2013] Source does appear to be extended
[Sat May 11 11:03:54 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.50
[Sat May 11 11:14:30 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 11 11:14:30 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 11 11:14:30 2013] Initial guess for spatial extent in simple fitting = 1.31"
[Sat May 11 11:14:30 2013] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.903
[Sat May 11 11:14:30 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 1.31"
[Sat May 11 11:17:21 2013] fullrun_ccd3_acisf12148_pi14-548_cl_pass1_src1.ximg exists
[Sat May 11 11:17:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12148_pi14-548_cl_pass1_src1.csv
[Sat May 11 11:17:21 2013] fullrun_ccd3_acisf12148_pi14-548_cl_pass1_src1_1.ximg exists
[Sat May 11 11:17:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12148_pi14-548_cl_pass1_src1.csv
[Sat May 11 11:17:21 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12148_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12148_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 11:17:21 2013] fullrun_ccd3_acisf12148_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat May 11 11:17:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12148_pi14-548_cl_pass1_tfrozen_src1.csv
[Sat May 11 11:17:21 2013] fullrun_ccd3_acisf12148_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat May 11 11:17:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12148_pi14-548_cl_pass1_tfrozen_src1.csv
[Sat May 11 11:17:21 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12148_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12148_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 11:17:25 2013] Spatial fit model total counts = 18.490900, observed total counts = 21.000000
[Sat May 11 11:17:25 2013] Offset between fit and detection position for source 1 = 1.201054 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.201054 pixels
  Position = (286.7, 783.9) = 19 54 24.31 28 42 51.3
  Extent = 1.3 (1.1-1.6)", rotation angle = 0
  Source counts = 19.4 +/- 4.4
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Sat May 11 11:17:25 2013] Vigneting correction estimate = 1.000000
[Sat May 11 11:17:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 11:17:25 2013] Assessing source extent using major axis lower bound
[Sat May 11 11:17:25 2013] Source does appear to be extended
[Sat May 11 11:17:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 11:25:32 2013] Writing source region out to fullrun_ccd3_acisf12148_pi14-548_pass1_cl_src1_src.reg
[Sat May 11 11:25:32 2013] Extracting stamp from image fullrun_ccd3_acisf12148_pi14-548_cl_sm2.00.img.gz, (228, 725) - (345, 842)
[Sat May 11 11:25:32 2013] Writing fullrun_ccd3_acisf12148_pi14-548_pass1_cl_src1.gif
[Sat May 11 11:25:33 2013] Size of ../../acisf12148/products/events/fullrun_ccd3_acisf12148_pi14-548_pass1_cl_src1_src.evt.gz[events] = 20 counts
[Sat May 11 11:25:33 2013] Mean chipx,y = (249.20, 800.60)
[Sat May 11 11:25:33 2013] Mean tdetx,y = (4331.40, 3310.20)
[Sat May 11 11:25:33 2013] chipx,y range = (230.00-265.00, 782.00-824.00)
[Sat May 11 11:25:33 2013] Size of ../../acisf12148/products/events/fullrun_ccd3_acisf12148_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 14 counts
[Sat May 11 11:25:34 2013] Not generating rmf since there are only 19 counts
[Sat May 11 11:25:34 2013] arf not found, will run specextract
[Sat May 11 11:26:02 2013] ../../acisf12148/products/spectra/fullrun_ccd3_acisf12148_pi14-548_pass1_cl_src1.warf not found
[Sat May 11 11:26:02 2013] ../../acisf12148/products/spectra/fullrun_ccd3_acisf12148_pi14-548_pass1_cl_src1.wrmf not found
[Sat May 11 11:26:02 2013] Removal of ../../acisf12148/products/spectra/fullrun_ccd3_acisf12148_pi14-548_pass1_cl_src1.soff failed
[Sat May 11 11:27:54 2013] Spectrum 1 has only 19 counts, deleting rmf
[Sat May 11 11:27:54 2013] 167.174
[Sat May 11 11:28:28 2013] Updating aperture counts using extracted products
[Sat May 11 11:28:28 2013] Total counts from fullrun_ccd3_acisf12148_pi14-548_pass1_cl_src1_src.pi.gz = 20.00
[Sat May 11 11:28:28 2013] Total counts from fullrun_ccd3_acisf12148_pi14-548_pass1_cl_src1_bgd.pi.gz = 14.00
[Sat May 11 11:28:28 2013] Got source and background scale factors 0.000005, 0.000060
[Sat May 11 11:28:28 2013] User source parameters:
  Position = (286.7, 783.9) = 19 54 24.31 28 42 51.3
  Extent = 1.3 (1.1-1.6)", rotation angle = 0
  Source aperture counts = 18.8 +/- 5.6
  Background aperture counts = 1.2
  Rate = 0.002 +/- 0.0006

[Sat May 11 11:28:28 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 11:28:28 2013] Using photon index=1.80, rate=0.00197, arf fullrun_ccd3_acisf12148_pi14-548_pass1_cl_src1.arf
[Sat May 11 11:28:28 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat May 11 11:28:28 2013] Updating source flux to 3.4e-14
[Sat May 11 11:28:35 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sat May 11 11:28:36 2013] acisf12148/analysis//spectral/fullrun_ccd3_acisf12148_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete