[Mon Feb 20 04:45:46 2012] Detection parameters:
  Position = (84.6, 711.8) = 6 34 37.13 4 12 57.9
  Extent = 0.5" x 0.5", rotation angle = 39 degrees
  Source counts = 16.2 +/- 4.1
  Background counts = 0.8
  Rate = 0.0004 +/- 0.0001

[Mon Feb 20 04:45:47 2012] Off-axis axis estimate = 0.41'
[Mon Feb 20 05:49:33 2012] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 05:49:33 2012] Initial guess for spatial extent in simple fitting = 0.40"
[Mon Feb 20 05:49:33 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.316
[Mon Feb 20 05:49:33 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 0.40"
[Mon Feb 20 06:19:18 2012] fullrun_ccd3_acisf12142_pi14-548_cl_pass0_src17.ximg exists
[Mon Feb 20 06:19:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12142_pi14-548_cl_pass0_src17.csv
[Mon Feb 20 06:19:18 2012] fullrun_ccd3_acisf12142_pi14-548_cl_pass0_src17_1.ximg exists
[Mon Feb 20 06:19:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12142_pi14-548_cl_pass0_src17.csv
[Mon Feb 20 06:19:18 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12142_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12142_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 06:19:18 2012] fullrun_ccd3_acisf12142_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Mon Feb 20 06:19:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12142_pi14-548_cl_pass0_tfrozen_src17.csv
[Mon Feb 20 06:19:18 2012] fullrun_ccd3_acisf12142_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Feb 20 06:19:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12142_pi14-548_cl_pass0_tfrozen_src17.csv
[Mon Feb 20 06:19:18 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12142_pi14-548_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12142_pi14-548_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 06:29:24 2012] Spatial fit model total counts = 43.881300, observed total counts = 54.000000
[Mon Feb 20 06:29:24 2012] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Feb 20 06:29:24 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 06:29:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 06:29:24 2012] Assessing source extent using major
[Mon Feb 20 06:29:24 2012] Source does appear to be extended
[Mon Feb 20 06:29:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 07:24:37 2012] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 07:24:37 2012] Initial guess for spatial extent in simple fitting = 0.40"
[Mon Feb 20 07:24:37 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.316
[Mon Feb 20 07:24:37 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 0.40"
[Mon Feb 20 07:54:15 2012] fullrun_ccd3_acisf12142_pi14-548_cl_pass1_src17.ximg exists
[Mon Feb 20 07:54:15 2012] fullrun_ccd3_acisf12142_pi14-548_cl_pass1_src17_1.ximg exists
[Mon Feb 20 07:54:15 2012] Fit fullrun_ccd3_acisf12142_pi14-548_cl_pass1_src17 appears to have run properly
[Mon Feb 20 07:54:15 2012] fullrun_ccd3_acisf12142_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Mon Feb 20 07:54:15 2012] fullrun_ccd3_acisf12142_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Mon Feb 20 07:54:15 2012] Fit fullrun_ccd3_acisf12142_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Mon Feb 20 08:06:58 2012] Spatial fit model total counts = 53.923800, observed total counts = 54.000000
[Mon Feb 20 08:06:58 2012] Offset between fit and detection position for source 10 = 0.675536 pixels
[Mon Feb 20 08:06:58 2012] 31.802800 total counts/ 15.151800 bgd. counts: snr = 4.277679
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.675536 pixels
  Position = (85.1, 712.3) = 6 34 37.13 4 12 57.9
  Extent = 0.3 (0.2-0.4)", rotation angle = 0
  Source counts = 16.7 +/- 5.6
  Background counts = 15.2
  Rate = 0.0004 +/- 0.0001
[Mon Feb 20 08:06:58 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 08:06:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 08:06:58 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 08:06:58 2012] Source does appear to be extended
[Mon Feb 20 08:06:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 08:31:25 2012] Writing source region out to fullrun_ccd3_acisf12142_pi14-548_pass1_cl_src10_src.reg
[Mon Feb 20 08:31:25 2012] Extracting stamp from image fullrun_ccd3_acisf12142_pi14-548_cl_sm2.00.img.gz, (70, 697) - (100, 727)
[Mon Feb 20 08:31:25 2012] Writing fullrun_ccd3_acisf12142_pi14-548_pass1_cl_src10.gif
[Mon Feb 20 08:40:51 2012] Size of ../../acisf12142/products/events/fullrun_ccd3_acisf12142_pi14-548_pass1_cl_src10_src.evt.gz[events] = 18 counts
[Mon Feb 20 08:40:51 2012] Mean chipx,y = (938.00, 979.39)
[Mon Feb 20 08:40:51 2012] Mean tdetx,y = (4152.61, 3999.00)
[Mon Feb 20 08:40:51 2012] chipx,y range = (920.00-956.00, 963.00-996.00)
[Mon Feb 20 08:40:51 2012] Size of ../../acisf12142/products/events/fullrun_ccd3_acisf12142_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 10 counts
[Mon Feb 20 08:40:52 2012] Not generating rmf since there are only 16 counts
[Mon Feb 20 08:40:52 2012] arf not found, will run specextract
[Mon Feb 20 08:41:21 2012] ../../acisf12142/products/spectra/fullrun_ccd3_acisf12142_pi14-548_pass1_cl_src10.warf not found
[Mon Feb 20 08:41:21 2012] ../../acisf12142/products/spectra/fullrun_ccd3_acisf12142_pi14-548_pass1_cl_src10.wrmf not found
[Mon Feb 20 08:41:21 2012] Removal of ../../acisf12142/products/spectra/fullrun_ccd3_acisf12142_pi14-548_pass1_cl_src10.soff failed
[Mon Feb 20 08:51:19 2012] Spectrum 10 has only 17 counts, deleting rmf
[Mon Feb 20 08:51:19 2012] 201.768
[Mon Feb 20 08:51:42 2012] Updating aperture counts using extracted products
[Mon Feb 20 08:51:42 2012] Error reading totcts from fullrun_ccd3_acisf12142_pi14-548_pass1_cl_src10_src.pi.gz
[Mon Feb 20 08:51:42 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 08:51:42 2012] Using photon index=1.80, rate=0.000421, arf fullrun_ccd3_acisf12142_pi14-548_pass1_cl_src10.arf
[Mon Feb 20 08:51:42 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Feb 20 08:51:42 2012] Updating source flux to 5.4e-15
[Mon Feb 20 08:51:54 2012] Flag p found in src. 10 procflags, skipping spectral fitting
[Mon Feb 20 08:51:54 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting