[Mon Feb 20 04:45:43 2012] Detection parameters:
  Position = (1088.8, 1020.3) = 6 34 30.15 4 21 14.6
  Extent = 3.6" x 2.2", rotation angle = 156 degrees
  Source counts = 193.2 +/- 14.9
  Background counts = 29.8
  Rate = 0.005 +/- 0.0004

[Mon Feb 20 04:45:44 2012] Off-axis axis estimate = 8.36'
[Mon Feb 20 05:13:39 2012] Using EEF radius (= 3.09 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 05:13:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 20 05:13:39 2012] Initial guess for spatial extent in simple fitting = 3.09"
[Mon Feb 20 05:13:39 2012] source mask rpix=6.3, npix_max = 183, mask sum = 182, frac = 0.992
[Mon Feb 20 05:13:39 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 3.09"
[Mon Feb 20 05:49:33 2012] fullrun_ccd2_acisf12142_pi14-548_cl_pass0_src1.ximg exists
[Mon Feb 20 05:49:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12142_pi14-548_cl_pass0_src1.csv
[Mon Feb 20 05:49:33 2012] fullrun_ccd2_acisf12142_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Feb 20 05:49:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12142_pi14-548_cl_pass0_src1.csv
[Mon Feb 20 05:49:33 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12142_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12142_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 05:49:33 2012] fullrun_ccd2_acisf12142_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Feb 20 05:49:33 2012] fullrun_ccd2_acisf12142_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Feb 20 05:49:33 2012] Fit fullrun_ccd2_acisf12142_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Feb 20 06:29:20 2012] Spatial fit model total counts = 235.727000, observed total counts = 235.000000
[Mon Feb 20 06:29:20 2012] Offset between fit and detection position for source 3 = 1.506638 pixels
[Mon Feb 20 06:29:20 2012] 235.085100 total counts/ 44.574100 bgd. counts: snr = 28.535058
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.506638 pixels
  Position = (1090.0, 1021.2) = 6 34 30.13 4 21 14.7
  Extent = 3.2 (2.7-3.7)", rotation angle = 0
  Source counts = 190.5 +/- 15.3
  Background counts = 44.6
  Rate = 0.005 +/- 0.0004
[Mon Feb 20 06:29:20 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 06:29:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 06:29:20 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 06:29:20 2012] Source does appear to be extended
[Mon Feb 20 06:29:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 06:49:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 20 06:49:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 20 06:49:43 2012] Initial guess for spatial extent in simple fitting = 3.20"
[Mon Feb 20 06:49:43 2012] source mask rpix=6.5, npix_max = 196, mask sum = 196, frac = 0.997
[Mon Feb 20 06:49:43 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 3.20"
[Mon Feb 20 07:24:37 2012] fullrun_ccd2_acisf12142_pi14-548_cl_pass1_src1.ximg exists
[Mon Feb 20 07:24:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12142_pi14-548_cl_pass1_src1.csv
[Mon Feb 20 07:24:37 2012] fullrun_ccd2_acisf12142_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Feb 20 07:24:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12142_pi14-548_cl_pass1_src1.csv
[Mon Feb 20 07:24:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12142_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12142_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 07:24:37 2012] fullrun_ccd2_acisf12142_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Feb 20 07:24:37 2012] fullrun_ccd2_acisf12142_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Feb 20 07:24:37 2012] Fit fullrun_ccd2_acisf12142_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Feb 20 08:06:54 2012] Spatial fit model total counts = 234.602000, observed total counts = 235.000000
[Mon Feb 20 08:06:54 2012] Offset between fit and detection position for source 3 = 0.059426 pixels
[Mon Feb 20 08:06:54 2012] 233.577200 total counts/ 37.841200 bgd. counts: snr = 31.819127
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.059426 pixels
  Position = (1090.0, 1021.2) = 6 34 30.13 4 21 14.8
  Extent = 3.3 (2.8-3.8)", rotation angle = 0
  Source counts = 195.7 +/- 15.3
  Background counts = 37.8
  Rate = 0.005 +/- 0.0004
[Mon Feb 20 08:06:54 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 08:06:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 08:06:54 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 08:06:54 2012] Source does appear to be extended
[Mon Feb 20 08:06:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 08:17:31 2012] Writing source region out to fullrun_ccd2_acisf12142_pi14-548_pass1_cl_src3_src.reg
[Mon Feb 20 08:17:31 2012] Extracting stamp from image fullrun_ccd2_acisf12142_pi14-548_cl_sm2.00.img.gz, (939, 870) - (1241, 1173)
[Mon Feb 20 08:17:31 2012] Writing fullrun_ccd2_acisf12142_pi14-548_pass1_cl_src3.gif
[Mon Feb 20 08:17:36 2012] Size of ../../acisf12142/products/events/fullrun_ccd2_acisf12142_pi14-548_pass1_cl_src3_src.evt.gz[events] = 229 counts
[Mon Feb 20 08:17:36 2012] Mean chipx,y = (989.39, 584.00)
[Mon Feb 20 08:17:36 2012] Mean tdetx,y = (3645.00, 3096.61)
[Mon Feb 20 08:17:36 2012] chipx,y range = (952.00-1014.00, 552.00-619.00)
[Mon Feb 20 08:17:36 2012] Size of ../../acisf12142/products/events/fullrun_ccd2_acisf12142_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 214 counts
[Mon Feb 20 08:17:37 2012] rmf not found, will run specextract
[Mon Feb 20 08:17:37 2012] arf not found, will run specextract
[Mon Feb 20 08:18:07 2012] ../../acisf12142/products/spectra/fullrun_ccd2_acisf12142_pi14-548_pass1_cl_src3.warf not found
[Mon Feb 20 08:18:07 2012] ../../acisf12142/products/spectra/fullrun_ccd2_acisf12142_pi14-548_pass1_cl_src3.wrmf not found
[Mon Feb 20 08:18:07 2012] Removal of ../../acisf12142/products/spectra/fullrun_ccd2_acisf12142_pi14-548_pass1_cl_src3.soff failed
[Mon Feb 20 08:31:25 2012] Keeping rmf generated by specextract
[Mon Feb 20 08:31:25 2012] 159.474
[Mon Feb 20 08:51:41 2012] Updating aperture counts using extracted products
[Mon Feb 20 08:51:41 2012] Error reading totcts from fullrun_ccd2_acisf12142_pi14-548_pass1_cl_src3_src.pi.gz
[Mon Feb 20 08:51:41 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 08:51:41 2012] Using photon index=1.80, rate=0.00495, arf fullrun_ccd2_acisf12142_pi14-548_pass1_cl_src3.arf
[Mon Feb 20 08:51:41 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Feb 20 08:51:41 2012] Updating source flux to 7.8e-14
[Mon Feb 20 08:51:53 2012] Reading fit data from acisf12142/analysis//spectral/fullrun_ccd2_acisf12142_pi14-548_pass1_cl_src3_pl.csv
[Mon Feb 20 08:51:53 2012] Spectral fit parameter nH value = 1.14923e+22
[Mon Feb 20 08:51:53 2012] Spectral fit parameter PhoIndex value = 1.95673
[Mon Feb 20 08:51:53 2012] Failed to get F(0.3-8.0) from acisf12142/analysis//spectral/fullrun_ccd2_acisf12142_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Mon Feb 20 08:51:53 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 08:51:53 2012] Using Nh = 1.1e+22, photon index=1.96, rate=0.00495, arf fullrun_ccd2_acisf12142_pi14-548_pass1_cl_src3.arf
[Mon Feb 20 08:51:53 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Feb 20 08:51:53 2012] Updating source flux to 8.5e-14