[Wed Jan 18 04:46:15 2012] Detection parameters:
  Position = (447.5, 1012.9) = 3 32 32.75 -27 51 51.6
  Extent = 0.7" x 0.5", rotation angle = 179 degrees
  Source counts = 25.2 +/- 5.3
  Background counts = 2.8
  Rate = 0.0003 +/- 6e-05

[Wed Jan 18 04:46:16 2012] Off-axis axis estimate = 3.28'
[Wed Jan 18 05:58:20 2012] Using EEF radius (= 0.64 ")to estimate initial spatial extent for simple fitting
[Wed Jan 18 05:58:20 2012] Initial guess for spatial extent in simple fitting = 0.64"
[Wed Jan 18 05:58:20 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.924
[Wed Jan 18 05:58:20 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 0.64"
[Wed Jan 18 06:16:06 2012] fullrun_ccd2_acisf12137_pi14-548_cl_pass0_src5.ximg exists
[Wed Jan 18 06:16:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12137_pi14-548_cl_pass0_src5.csv
[Wed Jan 18 06:16:06 2012] fullrun_ccd2_acisf12137_pi14-548_cl_pass0_src5_1.ximg exists
[Wed Jan 18 06:16:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12137_pi14-548_cl_pass0_src5.csv
[Wed Jan 18 06:16:06 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12137_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12137_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 06:16:07 2012] fullrun_ccd2_acisf12137_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Wed Jan 18 06:16:07 2012] fullrun_ccd2_acisf12137_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Jan 18 06:16:07 2012] Fit fullrun_ccd2_acisf12137_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Jan 18 07:02:21 2012] Spatial fit model total counts = 32.886800, observed total counts = 33.000000
[Wed Jan 18 07:02:21 2012] Offset between fit and detection position for source 4 = 0.731683 pixels
[Wed Jan 18 07:02:21 2012] 32.713400 total counts/ 10.469500 bgd. counts: snr = 6.874608
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.731683 pixels
  Position = (447.7, 1013.6) = 3 32 32.76 -27 51 51.5
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 22.2 +/- 5.7
  Background counts = 10.5
  Rate = 0.0002 +/- 6e-05
[Wed Jan 18 07:02:21 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 07:02:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 07:02:21 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 07:02:21 2012] Source does appear to be extended
[Wed Jan 18 07:02:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 08:03:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan 18 08:03:57 2012] Initial guess for spatial extent in simple fitting = 0.47"
[Wed Jan 18 08:03:57 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.064
[Wed Jan 18 08:03:57 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 0.47"
[Wed Jan 18 08:21:50 2012] fullrun_ccd2_acisf12137_pi14-548_cl_pass1_src5.ximg exists
[Wed Jan 18 08:21:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12137_pi14-548_cl_pass1_src5.csv
[Wed Jan 18 08:21:50 2012] fullrun_ccd2_acisf12137_pi14-548_cl_pass1_src5_1.ximg exists
[Wed Jan 18 08:21:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12137_pi14-548_cl_pass1_src5.csv
[Wed Jan 18 08:21:50 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12137_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12137_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 08:21:50 2012] fullrun_ccd2_acisf12137_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Wed Jan 18 08:21:50 2012] fullrun_ccd2_acisf12137_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Jan 18 08:21:50 2012] Fit fullrun_ccd2_acisf12137_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Jan 18 09:02:05 2012] Spatial fit model total counts = 33.999800, observed total counts = 34.000000
[Wed Jan 18 09:02:05 2012] Offset between fit and detection position for source 4 = 0.021799 pixels
[Wed Jan 18 09:02:05 2012] 34.121300 total counts/ 11.737000 bgd. counts: snr = 6.533787
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.021799 pixels
  Position = (447.7, 1013.5) = 3 32 32.76 -27 51 51.5
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 22.4 +/- 5.8
  Background counts = 11.7
  Rate = 0.0002 +/- 6e-05
[Wed Jan 18 09:02:05 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 09:02:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 09:02:05 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 09:02:05 2012] Source does appear to be extended
[Wed Jan 18 09:02:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 09:30:30 2012] Writing source region out to fullrun_ccd2_acisf12137_pi14-548_pass1_cl_src4_src.reg
[Wed Jan 18 09:30:30 2012] Extracting stamp from image fullrun_ccd2_acisf12137_pi14-548_cl_sm2.00.img.gz, (426, 991) - (470, 1036)
[Wed Jan 18 09:30:30 2012] Writing fullrun_ccd2_acisf12137_pi14-548_pass1_cl_src4.gif
[Wed Jan 18 09:33:10 2012] Size of ../../acisf12137/products/events/fullrun_ccd2_acisf12137_pi14-548_pass1_cl_src4_src.evt.gz[events] = 24 counts
[Wed Jan 18 09:33:10 2012] Mean chipx,y = (455.83, 913.21)
[Wed Jan 18 09:33:10 2012] Mean tdetx,y = (3974.21, 3630.17)
[Wed Jan 18 09:33:10 2012] chipx,y range = (440.00-473.00, 900.00-936.00)
[Wed Jan 18 09:33:10 2012] Size of ../../acisf12137/products/events/fullrun_ccd2_acisf12137_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 16 counts
[Wed Jan 18 09:33:11 2012] Not generating rmf since there are only 22 counts
[Wed Jan 18 09:33:11 2012] arf not found, will run specextract
[Wed Jan 18 09:33:41 2012] ../../acisf12137/products/spectra/fullrun_ccd2_acisf12137_pi14-548_pass1_cl_src4.warf not found
[Wed Jan 18 09:33:41 2012] ../../acisf12137/products/spectra/fullrun_ccd2_acisf12137_pi14-548_pass1_cl_src4.wrmf not found
[Wed Jan 18 09:33:41 2012] Removal of ../../acisf12137/products/spectra/fullrun_ccd2_acisf12137_pi14-548_pass1_cl_src4.soff failed
[Wed Jan 18 09:51:56 2012] Spectrum 4 has only 22 counts, deleting rmf
[Wed Jan 18 09:51:56 2012] 187.814
[Wed Jan 18 10:07:30 2012] Updating aperture counts using extracted products
[Wed Jan 18 10:07:30 2012] Error reading totcts from fullrun_ccd2_acisf12137_pi14-548_pass1_cl_src4_src.pi.gz
[Wed Jan 18 10:07:31 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 10:07:31 2012] Using photon index=1.80, rate=0.000241, arf fullrun_ccd2_acisf12137_pi14-548_pass1_cl_src4.arf
[Wed Jan 18 10:07:31 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Jan 18 10:07:31 2012] Updating source flux to 3e-15
[Wed Jan 18 10:07:59 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jan 18 10:08:00 2012] acisf12137/analysis//spectral/fullrun_ccd2_acisf12137_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete