[Mon Jan 16 22:16:24 2012] Detection parameters:
  Position = (253.5, 855.8) = 3 33 9.87 -27 46 36.8
  Extent = 1.4" x 1.2", rotation angle = 22 degrees
  Source counts = 10.3 +/- 4.2
  Background counts = 7.7
  Rate = 0.0002 +/- 7e-05

[Mon Jan 16 22:16:25 2012] Off-axis axis estimate = 9.52'
[Mon Jan 16 23:22:55 2012] Using EEF radius (= 4.01 ")to estimate initial spatial extent for simple fitting
[Mon Jan 16 23:22:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jan 16 23:22:55 2012] Initial guess for spatial extent in simple fitting = 4.01"
[Mon Jan 16 23:22:55 2012] source mask rpix=8.2, npix_max = 299, mask sum = 289, frac = 0.965
[Mon Jan 16 23:22:55 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 4.01"
[Mon Jan 16 23:46:50 2012] fullrun_ccd3_acisf12135_pi14-548_cl_pass0_src14.ximg exists
[Mon Jan 16 23:46:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12135_pi14-548_cl_pass0_src14.csv
[Mon Jan 16 23:46:50 2012] fullrun_ccd3_acisf12135_pi14-548_cl_pass0_src14_1.ximg exists
[Mon Jan 16 23:46:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12135_pi14-548_cl_pass0_src14.csv
[Mon Jan 16 23:46:50 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12135_pi14-548_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12135_pi14-548_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 16 23:46:50 2012] fullrun_ccd3_acisf12135_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Mon Jan 16 23:46:50 2012] fullrun_ccd3_acisf12135_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Mon Jan 16 23:46:50 2012] Fit fullrun_ccd3_acisf12135_pi14-548_cl_pass0_tfrozen_src14 appears to have run properly
[Mon Jan 16 23:54:29 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 46.637216 pixels away
[Mon Jan 16 23:54:29 2012] Vigneting correction estimate = 1.000000
[Mon Jan 16 23:54:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 16 23:54:29 2012] Assessing source extent using major
[Mon Jan 16 23:54:29 2012] Source does appear to be extended
[Mon Jan 16 23:54:29 2012] Computing asymmetry using major and minor axis, asym = 1.12
[Tue Jan 17 00:53:16 2012] Using EEF radius (= 4.01 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 00:53:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 00:53:16 2012] Initial guess for spatial extent in simple fitting = 4.01"
[Tue Jan 17 00:53:16 2012] source mask rpix=8.2, npix_max = 299, mask sum = 289, frac = 0.965
[Tue Jan 17 00:53:16 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 4.01"
[Tue Jan 17 01:14:18 2012] fullrun_ccd3_acisf12135_pi14-548_cl_pass1_src14.ximg exists
[Tue Jan 17 01:14:18 2012] fullrun_ccd3_acisf12135_pi14-548_cl_pass1_src14_1.ximg exists
[Tue Jan 17 01:14:18 2012] Fit fullrun_ccd3_acisf12135_pi14-548_cl_pass1_src14 appears to have run properly
[Tue Jan 17 01:14:18 2012] fullrun_ccd3_acisf12135_pi14-548_cl_pass1_tfrozen_src14.ximg exists
[Tue Jan 17 01:14:18 2012] fullrun_ccd3_acisf12135_pi14-548_cl_pass1_tfrozen_src14_1.ximg exists
[Tue Jan 17 01:14:18 2012] Fit fullrun_ccd3_acisf12135_pi14-548_cl_pass1_tfrozen_src14 appears to have run properly
[Tue Jan 17 01:25:53 2012] Source 6 is offset by -0.924718 and 0.057727 pixels which is larger than
2 X fitted extent = 0.871474 x 2.239214, not incorporating fit results
[Tue Jan 17 01:25:53 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 01:25:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 01:25:53 2012] Assessing source extent using major
[Tue Jan 17 01:25:53 2012] Source does appear to be extended
[Tue Jan 17 01:25:53 2012] Computing asymmetry using major and minor axis, asym = 1.12
[Tue Jan 17 02:06:41 2012] Writing source region out to fullrun_ccd3_acisf12135_pi14-548_pass1_cl_src6_src.reg
[Tue Jan 17 02:06:41 2012] Extracting stamp from image fullrun_ccd3_acisf12135_pi14-548_cl_sm2.00.img.gz, (190, 792) - (317, 919)
[Tue Jan 17 02:06:41 2012] Writing fullrun_ccd3_acisf12135_pi14-548_pass1_cl_src6.gif
[Tue Jan 17 02:13:49 2012] Size of ../../acisf12135/products/events/fullrun_ccd3_acisf12135_pi14-548_pass1_cl_src6_src.evt.gz[events] = 18 counts
[Tue Jan 17 02:13:49 2012] Mean chipx,y = (219.83, 105.39)
[Tue Jan 17 02:13:49 2012] Mean tdetx,y = (5026.61, 3280.83)
[Tue Jan 17 02:13:49 2012] chipx,y range = (208.00-246.00, 89.00-133.00)
[Tue Jan 17 02:13:49 2012] Size of ../../acisf12135/products/events/fullrun_ccd3_acisf12135_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 80 counts
[Tue Jan 17 02:13:50 2012] Not generating rmf since there are only 10 counts
[Tue Jan 17 02:13:50 2012] arf not found, will run specextract
[Tue Jan 17 02:14:04 2012] ../../acisf12135/products/spectra/fullrun_ccd3_acisf12135_pi14-548_pass1_cl_src6.warf not found
[Tue Jan 17 02:14:04 2012] ../../acisf12135/products/spectra/fullrun_ccd3_acisf12135_pi14-548_pass1_cl_src6.wrmf not found
[Tue Jan 17 02:14:04 2012] Removal of ../../acisf12135/products/spectra/fullrun_ccd3_acisf12135_pi14-548_pass1_cl_src6.soff failed
[Tue Jan 17 02:23:52 2012] Spectrum 6 has only 10 counts, deleting rmf
[Tue Jan 17 02:23:52 2012] 159.902
[Tue Jan 17 02:24:37 2012] Updating aperture counts using extracted products
[Tue Jan 17 02:24:37 2012] Error reading totcts from fullrun_ccd3_acisf12135_pi14-548_pass1_cl_src6_src.pi.gz
[Tue Jan 17 02:24:37 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 02:24:37 2012] Using photon index=1.80, rate=0.000165, arf fullrun_ccd3_acisf12135_pi14-548_pass1_cl_src6.arf
[Tue Jan 17 02:24:37 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 17 02:24:37 2012] Updating source flux to 2.6e-15
[Tue Jan 17 02:25:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting