[Sun Oct 30 06:08:56 2011] Detection parameters:
  Position = (611.8, 550.9) = 1 29 52.32 -73 26 55.5
  Extent = 0.5" x 0.5", rotation angle = 134 degrees
  Source counts = 24.1 +/- 5.2
  Background counts = 2.9
  Rate = 0.0007 +/- 0.0002

[Sun Oct 30 06:08:56 2011] Off-axis axis estimate = 6.23'
[Sun Oct 30 06:09:54 2011] Using EEF radius (= 1.75 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 06:09:54 2011] Initial guess for spatial extent in simple fitting = 1.75"
[Sun Oct 30 06:09:54 2011] source mask rpix=3.5, npix_max = 65, mask sum = 50, frac = 0.763
[Sun Oct 30 06:09:54 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 1.75"
[Sun Oct 30 06:09:54 2011] fullrun_ccd1_acisf12134_pi14-548_cl_pass0_src6.ximg exists
[Sun Oct 30 06:09:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12134_pi14-548_cl_pass0_src6.csv
[Sun Oct 30 06:09:54 2011] fullrun_ccd1_acisf12134_pi14-548_cl_pass0_src6_1.ximg exists
[Sun Oct 30 06:09:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12134_pi14-548_cl_pass0_src6.csv
[Sun Oct 30 06:09:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12134_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12134_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 06:09:55 2011] fullrun_ccd1_acisf12134_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Sun Oct 30 06:09:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12134_pi14-548_cl_pass0_tfrozen_src6.csv
[Sun Oct 30 06:09:55 2011] fullrun_ccd1_acisf12134_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Oct 30 06:09:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12134_pi14-548_cl_pass0_tfrozen_src6.csv
[Sun Oct 30 06:09:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12134_pi14-548_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12134_pi14-548_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 06:10:02 2011] Spatial fit model total counts = 48.625700, observed total counts = 37.000000
[Sun Oct 30 06:10:02 2011] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Oct 30 06:10:02 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 06:10:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 06:10:02 2011] Assessing source extent using major
[Sun Oct 30 06:10:02 2011] Source does appear to be extended
[Sun Oct 30 06:10:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 06:10:23 2011] Using EEF radius (= 1.75 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 06:10:23 2011] Initial guess for spatial extent in simple fitting = 1.75"
[Sun Oct 30 06:10:23 2011] source mask rpix=3.5, npix_max = 65, mask sum = 50, frac = 0.763
[Sun Oct 30 06:10:23 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 1.75"
[Sun Oct 30 06:10:24 2011] fullrun_ccd1_acisf12134_pi14-548_cl_pass1_src6.ximg exists
[Sun Oct 30 06:10:24 2011] fullrun_ccd1_acisf12134_pi14-548_cl_pass1_src6_1.ximg exists
[Sun Oct 30 06:10:24 2011] Fit fullrun_ccd1_acisf12134_pi14-548_cl_pass1_src6 appears to have run properly
[Sun Oct 30 06:10:24 2011] fullrun_ccd1_acisf12134_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Sun Oct 30 06:10:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12134_pi14-548_cl_pass1_tfrozen_src6.csv
[Sun Oct 30 06:10:24 2011] fullrun_ccd1_acisf12134_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Oct 30 06:10:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12134_pi14-548_cl_pass1_tfrozen_src6.csv
[Sun Oct 30 06:10:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12134_pi14-548_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12134_pi14-548_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 06:10:33 2011] Spatial fit model total counts = 40.068600, observed total counts = 37.000000
[Sun Oct 30 06:10:33 2011] Offset between fit and detection position for source 11 = 1.768387 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.768387 pixels
  Position = (612.4, 552.6) = 1 29 52.30 -73 26 54.9
  Extent = 1.8 (1.5-2.3)" x 0.9 (0.6-1.2)", rotation angle = 270 (253-284) degrees
  Source counts = 39.4 +/- 6.3
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Sun Oct 30 06:10:33 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 06:10:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 06:10:33 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 06:10:33 2011] Source does appear to be extended
[Sun Oct 30 06:10:33 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.30
[Sun Oct 30 06:15:18 2011] Not overwriting source region fullrun_ccd1_acisf12134_pi14-548_pass1_cl_src11_src.reg
[Sun Oct 30 06:15:18 2011] Extracting stamp from image fullrun_ccd1_acisf12134_pi14-548_cl_sm2.00.img.gz, (530, 470) - (695, 635)
[Sun Oct 30 06:15:18 2011] Writing fullrun_ccd1_acisf12134_pi14-548_pass1_cl_src11.gif
[Sun Oct 30 06:17:37 2011] ../../acisf12134/products/events/fullrun_ccd1_acisf12134_pi14-548_pass1_cl_src11_src.evt and ../../acisf12134/products/events/fullrun_ccd1_acisf12134_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Sun Oct 30 06:17:37 2011] Size of ../../acisf12134/products/events/fullrun_ccd1_acisf12134_pi14-548_pass1_cl_src11_src.evt.gz[events] = 37 counts
[Sun Oct 30 06:17:37 2011] Mean chipx,y = (514.14, 567.51)
[Sun Oct 30 06:17:37 2011] Mean tdetx,y = (4564.49, 4621.14)
[Sun Oct 30 06:17:37 2011] chipx,y range = (486.00-536.00, 548.00-583.00)
[Sun Oct 30 06:17:37 2011] Size of ../../acisf12134/products/events/fullrun_ccd1_acisf12134_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 74 counts
[Sun Oct 30 06:17:37 2011] ../../acisf12134/products/images/fullrun_ccd1_acisf12134_pi14-548_pass1_cl_src11_src.img and ../../acisf12134/products/images/fullrun_ccd1_acisf12134_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Sun Oct 30 06:17:37 2011] Not generating rmf since there are only 39 counts
[Sun Oct 30 06:17:37 2011] arf not found, will run specextract
[Sun Oct 30 06:18:01 2011] ../../acisf12134/products/spectra/fullrun_ccd1_acisf12134_pi14-548_pass1_cl_src11.warf not found
[Sun Oct 30 06:18:01 2011] ../../acisf12134/products/spectra/fullrun_ccd1_acisf12134_pi14-548_pass1_cl_src11.wrmf not found
[Sun Oct 30 06:18:01 2011] Removal of ../../acisf12134/products/spectra/fullrun_ccd1_acisf12134_pi14-548_pass1_cl_src11.soff failed
[Sun Oct 30 06:18:06 2011] ../../acisf12134/products/lightcurves/fullrun_ccd1_acisf12134_pi14-548_pass1_cl_src11_src.lc and ../../acisf12134/products/lightcurves/fullrun_ccd1_acisf12134_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Sun Oct 30 06:22:08 2011] Spectrum 11 has only 39 counts, deleting rmf
[Sun Oct 30 06:22:08 2011] 172.287
[Sun Oct 30 06:34:13 2011] Updating aperture counts using extracted products
[Sun Oct 30 06:34:13 2011] Error reading totcts from fullrun_ccd1_acisf12134_pi14-548_pass1_cl_src11_src.pi.gz
[Sun Oct 30 06:34:13 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 06:34:13 2011] Using photon index=1.80, rate=0.0012, arf fullrun_ccd1_acisf12134_pi14-548_pass1_cl_src11.arf
[Sun Oct 30 06:34:13 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 06:34:13 2011] Updating source flux to 1.6e-14
[Sun Oct 30 06:34:19 2011] Flag p found in src. 11 procflags, skipping spectral fitting
[Sun Oct 30 06:34:19 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 30 06:34:20 2011] acisf12134/analysis//spectral/fullrun_ccd1_acisf12134_pi14-548_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete