[Wed Sep 28 05:57:15 2011] Detection parameters:
  Position = (492.9, 653.3) = 1 30 26.61 -73 34 34.3
  Extent = 1.0" x 0.9", rotation angle = 72 degrees
  Source counts = 38.9 +/- 6.5
  Background counts = 3.1
  Rate = 0.002 +/- 0.0003

[Wed Sep 28 05:57:17 2011] Off-axis axis estimate = 6.14'
[Wed Sep 28 05:58:07 2011] Using EEF radius (= 1.70 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 05:58:07 2011] Initial guess for spatial extent in simple fitting = 1.70"
[Wed Sep 28 05:58:07 2011] source mask rpix=3.5, npix_max = 62, mask sum = 64, frac = 1.023
[Wed Sep 28 05:58:07 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.70"
[Wed Sep 28 05:58:09 2011] fullrun_ccd3_acisf12130_pi14-548_cl_pass0_src3.ximg exists
[Wed Sep 28 05:58:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12130_pi14-548_cl_pass0_src3.csv
[Wed Sep 28 05:58:09 2011] fullrun_ccd3_acisf12130_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Sep 28 05:58:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12130_pi14-548_cl_pass0_src3.csv
[Wed Sep 28 05:58:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12130_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12130_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 05:58:09 2011] fullrun_ccd3_acisf12130_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Sep 28 05:58:09 2011] fullrun_ccd3_acisf12130_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Sep 28 05:58:09 2011] Fit fullrun_ccd3_acisf12130_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Sep 28 05:58:17 2011] Spatial fit model total counts = 44.342600, observed total counts = 44.000000
[Wed Sep 28 05:58:17 2011] Offset between fit and detection position for source 4 = 0.674497 pixels
[Wed Sep 28 05:58:17 2011] 44.391460 total counts/ 6.517560 bgd. counts: snr = 14.835340
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.674497 pixels
  Position = (493.3, 653.8) = 1 30 26.61 -73 34 34.3
  Extent = 1.1 (0.7-1.5)", rotation angle = 0
  Source counts = 37.9 +/- 6.7
  Background counts = 6.5
  Rate = 0.001 +/- 0.0003
[Wed Sep 28 05:58:17 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 05:58:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 05:58:17 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 05:58:17 2011] Source does appear to be extended
[Wed Sep 28 05:58:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 05:58:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 05:58:38 2011] Initial guess for spatial extent in simple fitting = 1.11"
[Wed Sep 28 05:58:38 2011] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.990
[Wed Sep 28 05:58:38 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.11"
[Wed Sep 28 05:58:39 2011] fullrun_ccd3_acisf12130_pi14-548_cl_pass1_src3.ximg exists
[Wed Sep 28 05:58:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12130_pi14-548_cl_pass1_src3.csv
[Wed Sep 28 05:58:39 2011] fullrun_ccd3_acisf12130_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Sep 28 05:58:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12130_pi14-548_cl_pass1_src3.csv
[Wed Sep 28 05:58:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12130_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12130_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 05:58:39 2011] fullrun_ccd3_acisf12130_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Sep 28 05:58:39 2011] fullrun_ccd3_acisf12130_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Sep 28 05:58:39 2011] Fit fullrun_ccd3_acisf12130_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Sep 28 05:58:46 2011] Spatial fit model total counts = 41.931200, observed total counts = 42.000000
[Wed Sep 28 05:58:46 2011] Offset between fit and detection position for source 4 = 0.193020 pixels
[Wed Sep 28 05:58:46 2011] 42.162600 total counts/ 12.899500 bgd. counts: snr = 8.147679
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.193020 pixels
  Position = (493.2, 653.9) = 1 30 26.62 -73 34 34.2
  Extent = 0.8 (0.5-1.4)", rotation angle = 0
  Source counts = 29.3 +/- 6.5
  Background counts = 12.9
  Rate = 0.001 +/- 0.0003
[Wed Sep 28 05:58:46 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 05:58:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 05:58:46 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 05:58:46 2011] Source does appear to be extended
[Wed Sep 28 05:58:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 06:14:06 2011] Not overwriting source region fullrun_ccd3_acisf12130_pi14-548_pass1_cl_src4_src.reg
[Wed Sep 28 06:14:06 2011] Extracting stamp from image fullrun_ccd3_acisf12130_pi14-548_cl_sm2.00.img.gz, (456, 616) - (531, 692)
[Wed Sep 28 06:14:06 2011] Writing fullrun_ccd3_acisf12130_pi14-548_pass1_cl_src4.gif
[Wed Sep 28 06:15:14 2011] ../../acisf12130/products/events/fullrun_ccd3_acisf12130_pi14-548_pass1_cl_src4_src.evt and ../../acisf12130/products/events/fullrun_ccd3_acisf12130_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Wed Sep 28 06:15:14 2011] Size of ../../acisf12130/products/events/fullrun_ccd3_acisf12130_pi14-548_pass1_cl_src4_src.evt.gz[events] = 39 counts
[Wed Sep 28 06:15:14 2011] Mean chipx,y = (545.08, 397.67)
[Wed Sep 28 06:15:14 2011] Mean tdetx,y = (4734.33, 3606.08)
[Wed Sep 28 06:15:14 2011] chipx,y range = (522.00-563.00, 379.00-416.00)
[Wed Sep 28 06:15:14 2011] Size of ../../acisf12130/products/events/fullrun_ccd3_acisf12130_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 10 counts
[Wed Sep 28 06:15:14 2011] ../../acisf12130/products/images/fullrun_ccd3_acisf12130_pi14-548_pass1_cl_src4_src.img and ../../acisf12130/products/images/fullrun_ccd3_acisf12130_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Wed Sep 28 06:15:14 2011] Not generating rmf since there are only 29 counts
[Wed Sep 28 06:15:14 2011] arf not found, will run specextract
[Wed Sep 28 06:15:38 2011] ../../acisf12130/products/spectra/fullrun_ccd3_acisf12130_pi14-548_pass1_cl_src4.warf not found
[Wed Sep 28 06:15:38 2011] ../../acisf12130/products/spectra/fullrun_ccd3_acisf12130_pi14-548_pass1_cl_src4.wrmf not found
[Wed Sep 28 06:15:38 2011] Removal of ../../acisf12130/products/spectra/fullrun_ccd3_acisf12130_pi14-548_pass1_cl_src4.soff failed
[Wed Sep 28 06:15:46 2011] ../../acisf12130/products/lightcurves/fullrun_ccd3_acisf12130_pi14-548_pass1_cl_src4_src.lc and ../../acisf12130/products/lightcurves/fullrun_ccd3_acisf12130_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Wed Sep 28 06:23:55 2011] Spectrum 4 has only 29 counts, deleting rmf
[Wed Sep 28 06:23:55 2011] 175.319
[Wed Sep 28 06:23:59 2011] Updating aperture counts using extracted products
[Wed Sep 28 06:23:59 2011] Error reading totcts from fullrun_ccd3_acisf12130_pi14-548_pass1_cl_src4_src.pi.gz
[Wed Sep 28 06:23:59 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 06:23:59 2011] Using photon index=1.80, rate=0.00115, arf fullrun_ccd3_acisf12130_pi14-548_pass1_cl_src4.arf
[Wed Sep 28 06:23:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 06:23:59 2011] Updating source flux to 1.5e-14
[Wed Sep 28 06:24:09 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting