[Wed Sep 28 05:57:15 2011] Detection parameters:
  Position = (979.2, 824.9) = 1 29 30.16 -73 33 10.7
  Extent = 0.5" x 0.5", rotation angle = 79 degrees
  Source counts = 211.2 +/- 14.6
  Background counts = 0.8
  Rate = 0.008 +/- 0.0006

[Wed Sep 28 05:57:17 2011] Off-axis axis estimate = 1.93'
[Wed Sep 28 05:58:07 2011] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 05:58:07 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Wed Sep 28 05:58:07 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.812
[Wed Sep 28 05:58:07 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.42"
[Wed Sep 28 05:58:09 2011] fullrun_ccd3_acisf12130_pi14-548_cl_pass0_src1.ximg exists
[Wed Sep 28 05:58:09 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12130_pi14-548_cl_pass0_src1.csv
[Wed Sep 28 05:58:09 2011] fullrun_ccd3_acisf12130_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Sep 28 05:58:09 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12130_pi14-548_cl_pass0_src1.csv
[Wed Sep 28 05:58:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12130_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12130_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 05:58:09 2011] fullrun_ccd3_acisf12130_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 28 05:58:09 2011] fullrun_ccd3_acisf12130_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 28 05:58:09 2011] Fit fullrun_ccd3_acisf12130_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 28 05:58:17 2011] Spatial fit model total counts = 213.289000, observed total counts = 214.000000
[Wed Sep 28 05:58:17 2011] Offset between fit and detection position for source 2 = 0.752619 pixels
[Wed Sep 28 05:58:17 2011] 213.599840 total counts/ 6.756840 bgd. counts: snr = 79.573601
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.752619 pixels
  Position = (979.7, 825.4) = 1 29 30.16 -73 33 10.7
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 206.8 +/- 14.6
  Background counts = 6.8
  Rate = 0.008 +/- 0.0006
[Wed Sep 28 05:58:17 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 05:58:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 05:58:17 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 05:58:17 2011] Source does appear to be extended
[Wed Sep 28 05:58:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 05:58:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 05:58:38 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Wed Sep 28 05:58:38 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.179
[Wed Sep 28 05:58:38 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.43"
[Wed Sep 28 05:58:39 2011] fullrun_ccd3_acisf12130_pi14-548_cl_pass1_src1.ximg exists
[Wed Sep 28 05:58:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12130_pi14-548_cl_pass1_src1.csv
[Wed Sep 28 05:58:39 2011] fullrun_ccd3_acisf12130_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Sep 28 05:58:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12130_pi14-548_cl_pass1_src1.csv
[Wed Sep 28 05:58:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12130_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12130_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 05:58:39 2011] fullrun_ccd3_acisf12130_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 28 05:58:39 2011] fullrun_ccd3_acisf12130_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 28 05:58:39 2011] Fit fullrun_ccd3_acisf12130_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 28 05:58:46 2011] Spatial fit model total counts = 213.821000, observed total counts = 214.000000
[Wed Sep 28 05:58:46 2011] Offset between fit and detection position for source 2 = 0.001440 pixels
[Wed Sep 28 05:58:46 2011] 213.647410 total counts/ 6.457410 bgd. counts: snr = 81.534162
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.001440 pixels
  Position = (979.7, 825.4) = 1 29 30.16 -73 33 10.7
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 207.2 +/- 14.6
  Background counts = 6.5
  Rate = 0.008 +/- 0.0006
[Wed Sep 28 05:58:46 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 05:58:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 05:58:46 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 05:58:46 2011] Source does appear to be extended
[Wed Sep 28 05:58:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 06:14:06 2011] Not overwriting source region fullrun_ccd3_acisf12130_pi14-548_pass1_cl_src2_src.reg
[Wed Sep 28 06:14:06 2011] Extracting stamp from image fullrun_ccd3_acisf12130_pi14-548_cl_sm2.00.img.gz, (960, 806) - (1000, 845)
[Wed Sep 28 06:14:06 2011] Writing fullrun_ccd3_acisf12130_pi14-548_pass1_cl_src2.gif
[Wed Sep 28 06:14:08 2011] ../../acisf12130/products/events/fullrun_ccd3_acisf12130_pi14-548_pass1_cl_src2_src.evt and ../../acisf12130/products/events/fullrun_ccd3_acisf12130_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Wed Sep 28 06:14:08 2011] Size of ../../acisf12130/products/events/fullrun_ccd3_acisf12130_pi14-548_pass1_cl_src2_src.evt.gz[events] = 210 counts
[Wed Sep 28 06:14:08 2011] Mean chipx,y = (801.30, 843.35)
[Wed Sep 28 06:14:08 2011] Mean tdetx,y = (4288.65, 3862.30)
[Wed Sep 28 06:14:08 2011] chipx,y range = (782.00-821.00, 823.00-861.00)
[Wed Sep 28 06:14:08 2011] Size of ../../acisf12130/products/events/fullrun_ccd3_acisf12130_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 6 counts
[Wed Sep 28 06:14:08 2011] ../../acisf12130/products/images/fullrun_ccd3_acisf12130_pi14-548_pass1_cl_src2_src.img and ../../acisf12130/products/images/fullrun_ccd3_acisf12130_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Wed Sep 28 06:14:08 2011] rmf not found, will run specextract
[Wed Sep 28 06:14:08 2011] arf not found, will run specextract
[Wed Sep 28 06:14:37 2011] ../../acisf12130/products/spectra/fullrun_ccd3_acisf12130_pi14-548_pass1_cl_src2.warf not found
[Wed Sep 28 06:14:37 2011] ../../acisf12130/products/spectra/fullrun_ccd3_acisf12130_pi14-548_pass1_cl_src2.wrmf not found
[Wed Sep 28 06:14:37 2011] Removal of ../../acisf12130/products/spectra/fullrun_ccd3_acisf12130_pi14-548_pass1_cl_src2.soff failed
[Wed Sep 28 06:14:44 2011] ../../acisf12130/products/lightcurves/fullrun_ccd3_acisf12130_pi14-548_pass1_cl_src2_src.lc and ../../acisf12130/products/lightcurves/fullrun_ccd3_acisf12130_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Wed Sep 28 06:23:55 2011] Keeping rmf generated by specextract
[Wed Sep 28 06:23:55 2011] 199.438
[Wed Sep 28 06:23:59 2011] Updating aperture counts using extracted products
[Wed Sep 28 06:23:59 2011] Error reading totcts from fullrun_ccd3_acisf12130_pi14-548_pass1_cl_src2_src.pi.gz
[Wed Sep 28 06:23:59 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 06:23:59 2011] Using photon index=1.80, rate=0.00815, arf fullrun_ccd3_acisf12130_pi14-548_pass1_cl_src2.arf
[Wed Sep 28 06:23:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 06:23:59 2011] Updating source flux to 9.3e-14
[Wed Sep 28 06:24:12 2011] Reading fit data from acisf12130/analysis//spectral/fullrun_ccd3_acisf12130_pi14-548_pass1_cl_src2_pl.csv
[Wed Sep 28 06:24:12 2011] Spectral fit parameter nH value = 2.41786e+21
[Wed Sep 28 06:24:12 2011] Spectral fit parameter PhoIndex value = 1.78091
[Wed Sep 28 06:24:12 2011] Failed to get F(0.3-8.0) from acisf12130/analysis//spectral/fullrun_ccd3_acisf12130_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Sep 28 06:24:12 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 06:24:12 2011] Using Nh = 2.4e+21, photon index=1.78, rate=0.00815, arf fullrun_ccd3_acisf12130_pi14-548_pass1_cl_src2.arf
[Wed Sep 28 06:24:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 06:24:12 2011] Updating source flux to 9.5e-14