[Mon Oct 10 13:18:33 2011] Detection parameters:
  Position = (759.0, 864.5) = 20 32 26.14 40 57 28.9
  Extent = 0.7" x 0.7", rotation angle = 51 degrees
  Source counts = 1437.2 +/- 43.6
  Background counts = 462.8
  Rate = 0.2 +/- 0.007

[Mon Oct 10 13:18:39 2011] Off-axis axis estimate = 3.80'
[Mon Oct 10 13:19:32 2011] Using EEF radius (= 0.77 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 13:19:32 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 10 13:19:32 2011] Initial guess for spatial extent in simple fitting = 0.77"
[Mon Oct 10 13:19:32 2011] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.171
[Mon Oct 10 13:19:32 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.77"
[Mon Oct 10 13:19:33 2011] fullrun_ccd0_acisf12099_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 10 13:19:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12099_pi14-548_cl_pass0_src1.csv
[Mon Oct 10 13:19:33 2011] fullrun_ccd0_acisf12099_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 10 13:19:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12099_pi14-548_cl_pass0_src1.csv
[Mon Oct 10 13:19:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12099_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12099_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 13:19:34 2011] fullrun_ccd0_acisf12099_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 10 13:19:34 2011] fullrun_ccd0_acisf12099_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 10 13:19:34 2011] Fit fullrun_ccd0_acisf12099_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 10 13:19:50 2011] Spatial fit model total counts = 2944.940000, observed total counts = 2938.000000
[Mon Oct 10 13:19:50 2011] Offset between fit and detection position for source 1 = 3.313598 pixels
[Mon Oct 10 13:19:50 2011] 2918.577000 total counts/ 2013.300000 bgd. counts: snr = 20.175636
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 3.313598 pixels
  Position = (760.9, 867.1) = 20 32 26.08 40 57 30.0
  Extent = 1.5 (1.5-3.1)", rotation angle = 0
  Source counts = 905.3 +/- 54.0
  Background counts = 2013.3
  Rate = 0.2 +/- 0.009
[Mon Oct 10 13:19:50 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 13:19:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 13:19:50 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 13:19:50 2011] Source does appear to be extended
[Mon Oct 10 13:19:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 13:19:50 2011] Source is confused with source 2
[Mon Oct 10 13:20:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 10 13:20:10 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 10 13:20:10 2011] Initial guess for spatial extent in simple fitting = 1.54"
[Mon Oct 10 13:20:10 2011] source mask rpix=3.1, npix_max = 52, mask sum = 64, frac = 1.212
[Mon Oct 10 13:20:10 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.54"
[Mon Oct 10 13:20:11 2011] fullrun_ccd0_acisf12099_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 10 13:20:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12099_pi14-548_cl_pass1_src1.csv
[Mon Oct 10 13:20:11 2011] fullrun_ccd0_acisf12099_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 10 13:20:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12099_pi14-548_cl_pass1_src1.csv
[Mon Oct 10 13:20:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12099_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12099_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 13:20:12 2011] fullrun_ccd0_acisf12099_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 10 13:20:12 2011] fullrun_ccd0_acisf12099_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 10 13:20:12 2011] Fit fullrun_ccd0_acisf12099_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 10 13:20:28 2011] Spatial fit model total counts = 5542.810000, observed total counts = 5536.000000
[Mon Oct 10 13:20:28 2011] Offset between fit and detection position for source 1 = 0.378063 pixels
[Mon Oct 10 13:20:28 2011] 5490.750000 total counts/ 4379.610000 bgd. counts: snr = 16.790014
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.378063 pixels
  Position = (760.6, 866.9) = 20 32 26.09 40 57 29.9
  Extent = 1.6 (1.5-1.8)", rotation angle = 0
  Source counts = 1111.1 +/- 74.1
  Background counts = 4379.6
  Rate = 0.2 +/- 0.01
[Mon Oct 10 13:20:28 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 13:20:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 13:20:28 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 13:20:28 2011] Source does appear to be extended
[Mon Oct 10 13:20:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 13:20:48 2011] Not overwriting source region fullrun_ccd0_acisf12099_pi14-548_pass1_cl_src1_src.reg
[Mon Oct 10 13:20:48 2011] Extracting stamp from image fullrun_ccd0_acisf12099_pi14-548_cl_sm2.00.img.gz, (686, 792) - (835, 941)
[Mon Oct 10 13:20:48 2011] Writing fullrun_ccd0_acisf12099_pi14-548_pass1_cl_src1.gif
[Mon Oct 10 13:20:53 2011] ../../acisf12099/products/events/fullrun_ccd0_acisf12099_pi14-548_pass1_cl_src1_src.evt and ../../acisf12099/products/events/fullrun_ccd0_acisf12099_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Oct 10 13:20:53 2011] Size of ../../acisf12099/products/events/fullrun_ccd0_acisf12099_pi14-548_pass1_cl_src1_src.evt.gz[events] = 5071 counts
[Mon Oct 10 13:20:53 2011] Mean chipx,y = (842.27, 679.33)
[Mon Oct 10 13:20:53 2011] Mean tdetx,y = (3740.33, 4289.73)
[Mon Oct 10 13:20:53 2011] chipx,y range = (813.00-872.00, 651.00-709.00)
[Mon Oct 10 13:20:53 2011] Size of ../../acisf12099/products/events/fullrun_ccd0_acisf12099_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 12303 counts
[Mon Oct 10 13:20:53 2011] ../../acisf12099/products/images/fullrun_ccd0_acisf12099_pi14-548_pass1_cl_src1_src.img and ../../acisf12099/products/images/fullrun_ccd0_acisf12099_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Oct 10 13:20:53 2011] ../../acisf12099/products/spectra/fullrun_ccd0_acisf12099_pi14-548_pass1_cl_src1_src.pi and ../../acisf12099/products/spectra/fullrun_ccd0_acisf12099_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Oct 10 13:20:55 2011] ../../acisf12099/products/lightcurves/fullrun_ccd0_acisf12099_pi14-548_pass1_cl_src1_src.lc and ../../acisf12099/products/lightcurves/fullrun_ccd0_acisf12099_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Oct 10 13:24:04 2011] Keeping rmf generated by specextract
[Mon Oct 10 13:24:04 2011] 192.748
[Mon Oct 10 13:25:19 2011] Updating aperture counts using extracted products
[Mon Oct 10 13:25:19 2011] Error reading totcts from fullrun_ccd0_acisf12099_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Oct 10 13:25:20 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 13:25:20 2011] Using photon index=1.80, rate=0.186, arf fullrun_ccd0_acisf12099_pi14-548_pass1_cl_src1.arf
[Mon Oct 10 13:25:20 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 13:25:20 2011] Updating source flux to 2.9e-12
[Mon Oct 10 13:25:30 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Mon Oct 10 13:28:18 2011] Reading fit data from acisf12099/analysis//spectral/fullrun_ccd0_acisf12099_pi14-548_pass1_cl_src1_pl.csv
[Mon Oct 10 13:28:18 2011] Spectral fit parameter nH value = 2.76288e+22
[Mon Oct 10 13:28:18 2011] Spectral fit parameter PhoIndex value = -0.131897
[Mon Oct 10 13:28:18 2011] Failed to get F(0.3-8.0) from acisf12099/analysis//spectral/fullrun_ccd0_acisf12099_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Oct 10 13:28:18 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 13:28:18 2011] Using Nh = 2.8e+22, photon index=-0.13, rate=0.186, arf fullrun_ccd0_acisf12099_pi14-548_pass1_cl_src1.arf
[Mon Oct 10 13:28:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 13:28:18 2011] Updating source flux to 6.6e-12