[Mon Oct 17 23:35:43 2011] Detection parameters:
  Position = (794.3, 172.3) = 2 36 30.23 -52 27 1.7
  Extent = 0.5" x 0.5", rotation angle = 177 degrees
  Source counts = 319.2 +/- 17.9
  Background counts = 1.8
  Rate = 0.01 +/- 0.0008

[Mon Oct 17 23:35:43 2011] Off-axis axis estimate = 1.93'
[Mon Oct 17 23:36:19 2011] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 23:36:19 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Mon Oct 17 23:36:19 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.218
[Mon Oct 17 23:36:19 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.42"
[Mon Oct 17 23:36:20 2011] fullrun_ccd3_acisf12096_pi14-548_cl_pass0_src2.ximg exists
[Mon Oct 17 23:36:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12096_pi14-548_cl_pass0_src2.csv
[Mon Oct 17 23:36:20 2011] fullrun_ccd3_acisf12096_pi14-548_cl_pass0_src2_1.ximg exists
[Mon Oct 17 23:36:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12096_pi14-548_cl_pass0_src2.csv
[Mon Oct 17 23:36:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12096_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12096_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 23:36:20 2011] fullrun_ccd3_acisf12096_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Mon Oct 17 23:36:20 2011] fullrun_ccd3_acisf12096_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Oct 17 23:36:20 2011] Fit fullrun_ccd3_acisf12096_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Mon Oct 17 23:36:27 2011] Spatial fit model total counts = 328.365000, observed total counts = 324.000000
[Mon Oct 17 23:36:27 2011] Offset between fit and detection position for source 12 = 0.714270 pixels
[Mon Oct 17 23:36:27 2011] 327.995800 total counts/ 16.747800 bgd. counts: snr = 76.054985
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.714270 pixels
  Position = (794.9, 172.8) = 2 36 30.23 -52 27 1.7
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 311.2 +/- 18.1
  Background counts = 16.7
  Rate = 0.01 +/- 0.0008
[Mon Oct 17 23:36:27 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 23:36:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 23:36:27 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 23:36:27 2011] Source does appear to be extended
[Mon Oct 17 23:36:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 23:36:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 23:36:43 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Mon Oct 17 23:36:43 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.067
[Mon Oct 17 23:36:43 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.47"
[Mon Oct 17 23:36:43 2011] fullrun_ccd3_acisf12096_pi14-548_cl_pass1_src2.ximg exists
[Mon Oct 17 23:36:43 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12096_pi14-548_cl_pass1_src2.csv
[Mon Oct 17 23:36:43 2011] fullrun_ccd3_acisf12096_pi14-548_cl_pass1_src2_1.ximg exists
[Mon Oct 17 23:36:43 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12096_pi14-548_cl_pass1_src2.csv
[Mon Oct 17 23:36:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12096_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12096_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 23:36:43 2011] fullrun_ccd3_acisf12096_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Mon Oct 17 23:36:43 2011] fullrun_ccd3_acisf12096_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Oct 17 23:36:43 2011] Fit fullrun_ccd3_acisf12096_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Mon Oct 17 23:36:50 2011] Spatial fit model total counts = 324.000000, observed total counts = 324.000000
[Mon Oct 17 23:36:50 2011] Offset between fit and detection position for source 12 = 0.001907 pixels
[Mon Oct 17 23:36:50 2011] 323.629300 total counts/ 16.374300 bgd. counts: snr = 75.930732
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.001907 pixels
  Position = (794.8, 172.8) = 2 36 30.23 -52 27 1.7
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 307.3 +/- 18.0
  Background counts = 16.4
  Rate = 0.01 +/- 0.0008
[Mon Oct 17 23:36:50 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 23:36:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 23:36:50 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 23:36:50 2011] Source does appear to be extended
[Mon Oct 17 23:36:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 23:38:32 2011] Not overwriting source region fullrun_ccd3_acisf12096_pi14-548_pass1_cl_src12_src.reg
[Mon Oct 17 23:38:32 2011] Extracting stamp from image fullrun_ccd3_acisf12096_pi14-548_cl_sm2.00.img.gz, (773, 151) - (816, 194)
[Mon Oct 17 23:38:32 2011] Writing fullrun_ccd3_acisf12096_pi14-548_pass1_cl_src12.gif
[Mon Oct 17 23:38:36 2011] ../../acisf12096/products/events/fullrun_ccd3_acisf12096_pi14-548_pass1_cl_src12_src.evt and ../../acisf12096/products/events/fullrun_ccd3_acisf12096_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Mon Oct 17 23:38:36 2011] Size of ../../acisf12096/products/events/fullrun_ccd3_acisf12096_pi14-548_pass1_cl_src12_src.evt.gz[events] = 311 counts
[Mon Oct 17 23:38:36 2011] Mean chipx,y = (780.61, 864.54)
[Mon Oct 17 23:38:36 2011] Mean tdetx,y = (4267.46, 3841.61)
[Mon Oct 17 23:38:36 2011] chipx,y range = (761.00-799.00, 847.00-884.00)
[Mon Oct 17 23:38:36 2011] Size of ../../acisf12096/products/events/fullrun_ccd3_acisf12096_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 10 counts
[Mon Oct 17 23:38:36 2011] ../../acisf12096/products/images/fullrun_ccd3_acisf12096_pi14-548_pass1_cl_src12_src.img and ../../acisf12096/products/images/fullrun_ccd3_acisf12096_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Mon Oct 17 23:38:36 2011] ../../acisf12096/products/spectra/fullrun_ccd3_acisf12096_pi14-548_pass1_cl_src12_src.pi and ../../acisf12096/products/spectra/fullrun_ccd3_acisf12096_pi14-548_pass1_cl_src12_bgd.pi exist, delete to re-create
[Mon Oct 17 23:38:39 2011] ../../acisf12096/products/lightcurves/fullrun_ccd3_acisf12096_pi14-548_pass1_cl_src12_src.lc and ../../acisf12096/products/lightcurves/fullrun_ccd3_acisf12096_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Mon Oct 17 23:39:02 2011] Keeping rmf generated by specextract
[Mon Oct 17 23:39:02 2011] 186.52
[Mon Oct 17 23:39:05 2011] Updating aperture counts using extracted products
[Mon Oct 17 23:39:05 2011] Error reading totcts from fullrun_ccd3_acisf12096_pi14-548_pass1_cl_src12_src.pi.gz
[Mon Oct 17 23:39:05 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 23:39:05 2011] Using photon index=1.80, rate=0.0141, arf fullrun_ccd3_acisf12096_pi14-548_pass1_cl_src12.arf
[Mon Oct 17 23:39:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 23:39:05 2011] Updating source flux to 1.8e-13
[Mon Oct 17 23:39:15 2011] Reading fit data from acisf12096/analysis//spectral/fullrun_ccd3_acisf12096_pi14-548_pass1_cl_src12_pl.csv
[Mon Oct 17 23:39:15 2011] Spectral fit parameter nH value = 2.00682e+21
[Mon Oct 17 23:39:15 2011] Spectral fit parameter PhoIndex value = 2.11585
[Mon Oct 17 23:39:15 2011] Failed to get F(0.3-8.0) from acisf12096/analysis//spectral/fullrun_ccd3_acisf12096_pi14-548_pass1_cl_src12_pl.csv, possibly due to different flux energy range selected
[Mon Oct 17 23:39:15 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 23:39:15 2011] Using Nh = 2e+21, photon index=2.12, rate=0.0141, arf fullrun_ccd3_acisf12096_pi14-548_pass1_cl_src12.arf
[Mon Oct 17 23:39:15 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 23:39:15 2011] Updating source flux to 1.5e-13