[Mon Oct 17 23:35:41 2011] Detection parameters:
  Position = (903.3, 616.4) = 2 36 25.23 -52 31 54.0
  Extent = 0.6" x 0.5", rotation angle = 144 degrees
  Source counts = 10.8 +/- 3.3
  Background counts = 0.2
  Rate = 0.0005 +/- 0.0002

[Mon Oct 17 23:35:42 2011] Off-axis axis estimate = 3.58'
[Mon Oct 17 23:36:19 2011] Using EEF radius (= 0.71 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 23:36:19 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Mon Oct 17 23:36:19 2011] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.056
[Mon Oct 17 23:36:19 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.71"
[Mon Oct 17 23:36:19 2011] fullrun_ccd2_acisf12096_pi14-548_cl_pass0_src10.ximg exists
[Mon Oct 17 23:36:19 2011] fullrun_ccd2_acisf12096_pi14-548_cl_pass0_src10_1.ximg exists
[Mon Oct 17 23:36:19 2011] Fit fullrun_ccd2_acisf12096_pi14-548_cl_pass0_src10 appears to have run properly
[Mon Oct 17 23:36:19 2011] fullrun_ccd2_acisf12096_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Mon Oct 17 23:36:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12096_pi14-548_cl_pass0_tfrozen_src10.csv
[Mon Oct 17 23:36:19 2011] fullrun_ccd2_acisf12096_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Mon Oct 17 23:36:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12096_pi14-548_cl_pass0_tfrozen_src10.csv
[Mon Oct 17 23:36:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12096_pi14-548_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12096_pi14-548_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 23:36:26 2011] Spatial fit model total counts = 11.335700, observed total counts = 13.000000
[Mon Oct 17 23:36:26 2011] Offset between fit and detection position for source 5 = 1.123808 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 1.123808 pixels
  Position = (904.4, 616.7) = 2 36 25.20 -52 31 54.1
  Extent = 0.5 (0.3-0.7)", rotation angle = 0
  Source counts = 11.1 +/- 3.3
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0002
[Mon Oct 17 23:36:26 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 23:36:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 23:36:26 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 23:36:26 2011] Source does appear to be extended
[Mon Oct 17 23:36:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 23:36:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 23:36:41 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Mon Oct 17 23:36:41 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.109
[Mon Oct 17 23:36:41 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.45"
[Mon Oct 17 23:36:43 2011] fullrun_ccd2_acisf12096_pi14-548_cl_pass1_src10.ximg exists
[Mon Oct 17 23:36:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12096_pi14-548_cl_pass1_src10.csv
[Mon Oct 17 23:36:43 2011] fullrun_ccd2_acisf12096_pi14-548_cl_pass1_src10_1.ximg exists
[Mon Oct 17 23:36:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12096_pi14-548_cl_pass1_src10.csv
[Mon Oct 17 23:36:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12096_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12096_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 23:36:43 2011] fullrun_ccd2_acisf12096_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Mon Oct 17 23:36:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12096_pi14-548_cl_pass1_tfrozen_src10.csv
[Mon Oct 17 23:36:43 2011] fullrun_ccd2_acisf12096_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Mon Oct 17 23:36:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12096_pi14-548_cl_pass1_tfrozen_src10.csv
[Mon Oct 17 23:36:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12096_pi14-548_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12096_pi14-548_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 23:36:49 2011] Spatial fit model total counts = 11.470900, observed total counts = 13.000000
[Mon Oct 17 23:36:49 2011] Offset between fit and detection position for source 5 = 0.106329 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.106329 pixels
  Position = (904.3, 616.7) = 2 36 25.21 -52 31 54.0
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 11.2 +/- 3.3
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0002
[Mon Oct 17 23:36:49 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 23:36:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 23:36:49 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 23:36:49 2011] Source does appear to be extended
[Mon Oct 17 23:36:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 23:37:52 2011] Not overwriting source region fullrun_ccd2_acisf12096_pi14-548_pass1_cl_src5_src.reg
[Mon Oct 17 23:37:52 2011] Extracting stamp from image fullrun_ccd2_acisf12096_pi14-548_cl_sm2.00.img.gz, (884, 596) - (925, 637)
[Mon Oct 17 23:37:52 2011] Writing fullrun_ccd2_acisf12096_pi14-548_pass1_cl_src5.gif
[Mon Oct 17 23:38:17 2011] ../../acisf12096/products/events/fullrun_ccd2_acisf12096_pi14-548_pass1_cl_src5_src.evt and ../../acisf12096/products/events/fullrun_ccd2_acisf12096_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Mon Oct 17 23:38:17 2011] Size of ../../acisf12096/products/events/fullrun_ccd2_acisf12096_pi14-548_pass1_cl_src5_src.evt.gz[events] = 11 counts
[Mon Oct 17 23:38:17 2011] Mean chipx,y = (139.91, 613.55)
[Mon Oct 17 23:38:17 2011] Mean tdetx,y = (3674.55, 3946.09)
[Mon Oct 17 23:38:17 2011] chipx,y range = (121.00-154.00, 594.00-627.00)
[Mon Oct 17 23:38:17 2011] Size of ../../acisf12096/products/events/fullrun_ccd2_acisf12096_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 3 counts
[Mon Oct 17 23:38:17 2011] ../../acisf12096/products/images/fullrun_ccd2_acisf12096_pi14-548_pass1_cl_src5_src.img and ../../acisf12096/products/images/fullrun_ccd2_acisf12096_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Mon Oct 17 23:38:17 2011] ../../acisf12096/products/spectra/fullrun_ccd2_acisf12096_pi14-548_pass1_cl_src5_src.pi and ../../acisf12096/products/spectra/fullrun_ccd2_acisf12096_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Mon Oct 17 23:38:17 2011] Not generating rmf since there are only 11 counts
[Mon Oct 17 23:38:20 2011] ../../acisf12096/products/lightcurves/fullrun_ccd2_acisf12096_pi14-548_pass1_cl_src5_src.lc and ../../acisf12096/products/lightcurves/fullrun_ccd2_acisf12096_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Mon Oct 17 23:38:32 2011] 174.954
[Mon Oct 17 23:39:05 2011] Updating aperture counts using extracted products
[Mon Oct 17 23:39:05 2011] Error reading totcts from fullrun_ccd2_acisf12096_pi14-548_pass1_cl_src5_src.pi.gz
[Mon Oct 17 23:39:05 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 23:39:05 2011] Using photon index=1.80, rate=0.000511, arf fullrun_ccd2_acisf12096_pi14-548_pass1_cl_src5.arf
[Mon Oct 17 23:39:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 23:39:05 2011] Updating source flux to 6.7e-15
[Mon Oct 17 23:39:11 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct 17 23:39:12 2011] acisf12096/analysis//spectral/fullrun_ccd2_acisf12096_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete