[Mon Oct 10 02:40:01 2011] Detection parameters:
  Position = (409.9, 1015.1) = 10 5 16.57 -7 42 7.6
  Extent = 0.5" x 0.5", rotation angle = 59 degrees
  Source counts = 51.1 +/- 7.5
  Background counts = 4.9
  Rate = 0.0007 +/- 0.0001

[Mon Oct 10 02:40:06 2011] Off-axis axis estimate = 0.91'
[Mon Oct 10 02:41:29 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 02:41:29 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Oct 10 02:41:29 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.617
[Mon Oct 10 02:41:29 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 0.38"
[Mon Oct 10 02:41:32 2011] fullrun_ccd7_acisf12095_pi14-548_cl_pass0_src29.ximg exists
[Mon Oct 10 02:41:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12095_pi14-548_cl_pass0_src29.csv
[Mon Oct 10 02:41:32 2011] fullrun_ccd7_acisf12095_pi14-548_cl_pass0_src29_1.ximg exists
[Mon Oct 10 02:41:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12095_pi14-548_cl_pass0_src29.csv
[Mon Oct 10 02:41:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12095_pi14-548_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12095_pi14-548_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 02:41:34 2011] fullrun_ccd7_acisf12095_pi14-548_cl_pass0_tfrozen_src29.ximg exists
[Mon Oct 10 02:41:34 2011] fullrun_ccd7_acisf12095_pi14-548_cl_pass0_tfrozen_src29_1.ximg exists
[Mon Oct 10 02:41:34 2011] Fit fullrun_ccd7_acisf12095_pi14-548_cl_pass0_tfrozen_src29 appears to have run properly
[Mon Oct 10 02:41:56 2011] Spatial fit model total counts = 61.329900, observed total counts = 62.000000
[Mon Oct 10 02:41:56 2011] Offset between fit and detection position for source 28 = 0.659801 pixels
[Mon Oct 10 02:41:56 2011] 61.429200 total counts/ 15.205000 bgd. counts: snr = 11.854308
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.659801 pixels
  Position = (410.4, 1015.5) = 10 5 16.57 -7 42 7.6
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 46.2 +/- 7.8
  Background counts = 15.2
  Rate = 0.0006 +/- 0.0001
[Mon Oct 10 02:41:56 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 02:41:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 02:41:56 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 02:41:56 2011] Source does appear to be extended
[Mon Oct 10 02:41:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 02:42:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 10 02:42:21 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Mon Oct 10 02:42:21 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.253
[Mon Oct 10 02:42:21 2011] Giving source the simple spatial ID 29 for pass 1, mean size = 0.41"
[Mon Oct 10 02:42:23 2011] fullrun_ccd7_acisf12095_pi14-548_cl_pass1_src29.ximg exists
[Mon Oct 10 02:42:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12095_pi14-548_cl_pass1_src29.csv
[Mon Oct 10 02:42:23 2011] fullrun_ccd7_acisf12095_pi14-548_cl_pass1_src29_1.ximg exists
[Mon Oct 10 02:42:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12095_pi14-548_cl_pass1_src29.csv
[Mon Oct 10 02:42:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12095_pi14-548_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12095_pi14-548_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 02:42:26 2011] fullrun_ccd7_acisf12095_pi14-548_cl_pass1_tfrozen_src29.ximg exists
[Mon Oct 10 02:42:26 2011] fullrun_ccd7_acisf12095_pi14-548_cl_pass1_tfrozen_src29_1.ximg exists
[Mon Oct 10 02:42:26 2011] Fit fullrun_ccd7_acisf12095_pi14-548_cl_pass1_tfrozen_src29 appears to have run properly
[Mon Oct 10 02:42:47 2011] Spatial fit model total counts = 62.574100, observed total counts = 62.000000
[Mon Oct 10 02:42:47 2011] Offset between fit and detection position for source 28 = 0.007739 pixels
[Mon Oct 10 02:42:47 2011] 62.666200 total counts/ 15.312000 bgd. counts: snr = 12.101593
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.007739 pixels
  Position = (410.4, 1015.5) = 10 5 16.57 -7 42 7.6
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 47.4 +/- 7.9
  Background counts = 15.3
  Rate = 0.0006 +/- 0.0001
[Mon Oct 10 02:42:48 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 02:42:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 02:42:48 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 02:42:48 2011] Source does appear to be extended
[Mon Oct 10 02:42:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 02:45:07 2011] Not overwriting source region fullrun_ccd7_acisf12095_pi14-548_pass1_cl_src28_src.reg
[Mon Oct 10 02:45:07 2011] Extracting stamp from image fullrun_ccd7_acisf12095_pi14-548_cl_sm2.00.img.gz, (392, 997) - (429, 1034)
[Mon Oct 10 02:45:07 2011] Writing fullrun_ccd7_acisf12095_pi14-548_pass1_cl_src28.gif
[Mon Oct 10 02:46:37 2011] ../../acisf12095/products/events/fullrun_ccd7_acisf12095_pi14-548_pass1_cl_src28_src.evt and ../../acisf12095/products/events/fullrun_ccd7_acisf12095_pi14-548_pass1_cl_src28_bgd.evt exist, delete to re-create
[Mon Oct 10 02:46:37 2011] Size of ../../acisf12095/products/events/fullrun_ccd7_acisf12095_pi14-548_pass1_cl_src28_src.evt.gz[events] = 49 counts
[Mon Oct 10 02:46:37 2011] Mean chipx,y = (82.06, 468.29)
[Mon Oct 10 02:46:37 2011] Mean tdetx,y = (3999.06, 2170.29)
[Mon Oct 10 02:46:37 2011] chipx,y range = (64.00-98.00, 450.00-487.00)
[Mon Oct 10 02:46:37 2011] Size of ../../acisf12095/products/events/fullrun_ccd7_acisf12095_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 18 counts
[Mon Oct 10 02:46:37 2011] ../../acisf12095/products/images/fullrun_ccd7_acisf12095_pi14-548_pass1_cl_src28_src.img and ../../acisf12095/products/images/fullrun_ccd7_acisf12095_pi14-548_pass1_cl_src28_bgd.img exist, delete to re-create
[Mon Oct 10 02:46:37 2011] ../../acisf12095/products/spectra/fullrun_ccd7_acisf12095_pi14-548_pass1_cl_src28_src.pi and ../../acisf12095/products/spectra/fullrun_ccd7_acisf12095_pi14-548_pass1_cl_src28_bgd.pi exist, delete to re-create
[Mon Oct 10 02:46:37 2011] Not generating rmf since there are only 47 counts
[Mon Oct 10 02:46:40 2011] ../../acisf12095/products/lightcurves/fullrun_ccd7_acisf12095_pi14-548_pass1_cl_src28_src.lc and ../../acisf12095/products/lightcurves/fullrun_ccd7_acisf12095_pi14-548_pass1_cl_src28_bgd.lc exist, delete to re-create
[Mon Oct 10 02:49:32 2011] 230.656
[Mon Oct 10 02:49:38 2011] Updating aperture counts using extracted products
[Mon Oct 10 02:49:38 2011] Error reading totcts from fullrun_ccd7_acisf12095_pi14-548_pass1_cl_src28_src.pi.gz
[Mon Oct 10 02:49:39 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 02:49:39 2011] Using photon index=1.80, rate=0.000626, arf fullrun_ccd7_acisf12095_pi14-548_pass1_cl_src28.arf
[Mon Oct 10 02:49:39 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 02:49:40 2011] Updating source flux to 4.7e-15
[Mon Oct 10 02:50:06 2011] Source 28 has fewer than 100.000000 counts, skipping spectral fitting