[Mon Oct 10 02:40:00 2011] Detection parameters:
  Position = (466.5, 880.8) = 10 5 14.69 -7 43 13.6
  Extent = 0.5" x 0.5", rotation angle = 41 degrees
  Source counts = 64.0 +/- 8.5
  Background counts = 9.0
  Rate = 0.0008 +/- 0.0001

[Mon Oct 10 02:40:06 2011] Off-axis axis estimate = 0.40'
[Mon Oct 10 02:41:29 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 02:41:29 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Mon Oct 10 02:41:29 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.875
[Mon Oct 10 02:41:29 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 0.40"
[Mon Oct 10 02:41:32 2011] fullrun_ccd7_acisf12095_pi14-548_cl_pass0_src21.ximg exists
[Mon Oct 10 02:41:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12095_pi14-548_cl_pass0_src21.csv
[Mon Oct 10 02:41:32 2011] fullrun_ccd7_acisf12095_pi14-548_cl_pass0_src21_1.ximg exists
[Mon Oct 10 02:41:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12095_pi14-548_cl_pass0_src21.csv
[Mon Oct 10 02:41:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12095_pi14-548_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12095_pi14-548_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 02:41:34 2011] fullrun_ccd7_acisf12095_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Mon Oct 10 02:41:34 2011] fullrun_ccd7_acisf12095_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Mon Oct 10 02:41:34 2011] Fit fullrun_ccd7_acisf12095_pi14-548_cl_pass0_tfrozen_src21 appears to have run properly
[Mon Oct 10 02:41:56 2011] Spatial fit model total counts = 85.996500, observed total counts = 86.000000
[Mon Oct 10 02:41:56 2011] Offset between fit and detection position for source 19 = 0.702911 pixels
[Mon Oct 10 02:41:56 2011] 86.484100 total counts/ 21.007700 bgd. counts: snr = 14.285503
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.702911 pixels
  Position = (467.0, 881.3) = 10 5 14.69 -7 43 13.6
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 65.5 +/- 9.3
  Background counts = 21.0
  Rate = 0.0009 +/- 0.0001
[Mon Oct 10 02:41:56 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 02:41:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 02:41:56 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 02:41:56 2011] Source does appear to be extended
[Mon Oct 10 02:41:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 02:42:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 10 02:42:21 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Mon Oct 10 02:42:21 2011] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.828
[Mon Oct 10 02:42:21 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 0.42"
[Mon Oct 10 02:42:22 2011] fullrun_ccd7_acisf12095_pi14-548_cl_pass1_src21.ximg exists
[Mon Oct 10 02:42:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12095_pi14-548_cl_pass1_src21.csv
[Mon Oct 10 02:42:22 2011] fullrun_ccd7_acisf12095_pi14-548_cl_pass1_src21_1.ximg exists
[Mon Oct 10 02:42:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12095_pi14-548_cl_pass1_src21.csv
[Mon Oct 10 02:42:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12095_pi14-548_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12095_pi14-548_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 02:42:26 2011] fullrun_ccd7_acisf12095_pi14-548_cl_pass1_tfrozen_src21.ximg exists
[Mon Oct 10 02:42:26 2011] fullrun_ccd7_acisf12095_pi14-548_cl_pass1_tfrozen_src21_1.ximg exists
[Mon Oct 10 02:42:26 2011] Fit fullrun_ccd7_acisf12095_pi14-548_cl_pass1_tfrozen_src21 appears to have run properly
[Mon Oct 10 02:42:47 2011] Spatial fit model total counts = 86.341500, observed total counts = 87.000000
[Mon Oct 10 02:42:47 2011] Offset between fit and detection position for source 19 = 0.019167 pixels
[Mon Oct 10 02:42:47 2011] 87.024500 total counts/ 23.084900 bgd. counts: snr = 13.307789
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.019167 pixels
  Position = (467.0, 881.3) = 10 5 14.69 -7 43 13.6
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 63.9 +/- 9.3
  Background counts = 23.1
  Rate = 0.0008 +/- 0.0001
[Mon Oct 10 02:42:48 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 02:42:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 02:42:48 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 02:42:48 2011] Source does appear to be extended
[Mon Oct 10 02:42:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 02:45:07 2011] Not overwriting source region fullrun_ccd7_acisf12095_pi14-548_pass1_cl_src19_src.reg
[Mon Oct 10 02:45:07 2011] Extracting stamp from image fullrun_ccd7_acisf12095_pi14-548_cl_sm2.00.img.gz, (448, 862) - (486, 900)
[Mon Oct 10 02:45:07 2011] Writing fullrun_ccd7_acisf12095_pi14-548_pass1_cl_src19.gif
[Mon Oct 10 02:46:17 2011] ../../acisf12095/products/events/fullrun_ccd7_acisf12095_pi14-548_pass1_cl_src19_src.evt and ../../acisf12095/products/events/fullrun_ccd7_acisf12095_pi14-548_pass1_cl_src19_bgd.evt exist, delete to re-create
[Mon Oct 10 02:46:17 2011] Size of ../../acisf12095/products/events/fullrun_ccd7_acisf12095_pi14-548_pass1_cl_src19_src.evt.gz[events] = 67 counts
[Mon Oct 10 02:46:17 2011] Mean chipx,y = (208.00, 544.16)
[Mon Oct 10 02:46:17 2011] Mean tdetx,y = (4125.00, 2246.16)
[Mon Oct 10 02:46:17 2011] chipx,y range = (190.00-224.00, 524.00-562.00)
[Mon Oct 10 02:46:17 2011] Size of ../../acisf12095/products/events/fullrun_ccd7_acisf12095_pi14-548_pass1_cl_src19_bgd.evt.gz[events] = 66 counts
[Mon Oct 10 02:46:17 2011] ../../acisf12095/products/images/fullrun_ccd7_acisf12095_pi14-548_pass1_cl_src19_src.img and ../../acisf12095/products/images/fullrun_ccd7_acisf12095_pi14-548_pass1_cl_src19_bgd.img exist, delete to re-create
[Mon Oct 10 02:46:17 2011] ../../acisf12095/products/spectra/fullrun_ccd7_acisf12095_pi14-548_pass1_cl_src19_src.pi and ../../acisf12095/products/spectra/fullrun_ccd7_acisf12095_pi14-548_pass1_cl_src19_bgd.pi exist, delete to re-create
[Mon Oct 10 02:46:17 2011] Not generating rmf since there are only 63 counts
[Mon Oct 10 02:46:19 2011] ../../acisf12095/products/lightcurves/fullrun_ccd7_acisf12095_pi14-548_pass1_cl_src19_src.lc and ../../acisf12095/products/lightcurves/fullrun_ccd7_acisf12095_pi14-548_pass1_cl_src19_bgd.lc exist, delete to re-create
[Mon Oct 10 02:49:32 2011] 235.302
[Mon Oct 10 02:49:38 2011] Updating aperture counts using extracted products
[Mon Oct 10 02:49:38 2011] Error reading totcts from fullrun_ccd7_acisf12095_pi14-548_pass1_cl_src19_src.pi.gz
[Mon Oct 10 02:49:39 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 02:49:39 2011] Using photon index=1.80, rate=0.000845, arf fullrun_ccd7_acisf12095_pi14-548_pass1_cl_src19.arf
[Mon Oct 10 02:49:39 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 02:49:39 2011] Updating source flux to 6.3e-15
[Mon Oct 10 02:50:06 2011] Source 19 has fewer than 100.000000 counts, skipping spectral fitting