[Mon Oct 10 02:39:59 2011] Detection parameters:
  Position = (1117.6, 947.5) = 10 5 20.71 -7 37 30.4
  Extent = 0.8" x 0.7", rotation angle = 119 degrees
  Source counts = 14.9 +/- 4.1
  Background counts = 2.1
  Rate = 0.0002 +/- 5e-05

[Mon Oct 10 02:39:59 2011] Off-axis axis estimate = 5.56'
[Mon Oct 10 02:41:27 2011] Using EEF radius (= 1.42 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 02:41:27 2011] Initial guess for spatial extent in simple fitting = 1.42"
[Mon Oct 10 02:41:27 2011] source mask rpix=2.9, npix_max = 45, mask sum = 45, frac = 0.979
[Mon Oct 10 02:41:27 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 1.42"
[Mon Oct 10 02:41:29 2011] fullrun_ccd6_acisf12095_pi14-548_cl_pass0_src13.ximg exists
[Mon Oct 10 02:41:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12095_pi14-548_cl_pass0_src13.csv
[Mon Oct 10 02:41:29 2011] fullrun_ccd6_acisf12095_pi14-548_cl_pass0_src13_1.ximg exists
[Mon Oct 10 02:41:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12095_pi14-548_cl_pass0_src13.csv
[Mon Oct 10 02:41:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12095_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12095_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 02:41:29 2011] fullrun_ccd6_acisf12095_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Mon Oct 10 02:41:29 2011] fullrun_ccd6_acisf12095_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Oct 10 02:41:29 2011] Fit fullrun_ccd6_acisf12095_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Mon Oct 10 02:41:44 2011] Spatial fit model total counts = 26.030400, observed total counts = 26.000000
[Mon Oct 10 02:41:44 2011] Offset between fit and detection position for source 17 = 0.619007 pixels
[Mon Oct 10 02:41:44 2011] 25.326000 total counts/ 0.876900 bgd. counts: snr = 26.108856
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.619007 pixels
  Position = (1117.4, 948.1) = 10 5 20.74 -7 37 30.3
  Extent = 1.3 (0.6-1.7)", rotation angle = 0
  Source counts = 24.4 +/- 5.0
  Background counts = 0.9
  Rate = 0.0003 +/- 7e-05
[Mon Oct 10 02:41:44 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 02:41:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 02:41:44 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 02:41:44 2011] Source does appear to be extended
[Mon Oct 10 02:41:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 02:42:20 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 10 02:42:20 2011] Initial guess for spatial extent in simple fitting = 1.32"
[Mon Oct 10 02:42:20 2011] source mask rpix=2.7, npix_max = 40, mask sum = 38, frac = 0.933
[Mon Oct 10 02:42:20 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 1.32"
[Mon Oct 10 02:42:20 2011] fullrun_ccd6_acisf12095_pi14-548_cl_pass1_src13.ximg exists
[Mon Oct 10 02:42:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12095_pi14-548_cl_pass1_src13.csv
[Mon Oct 10 02:42:20 2011] fullrun_ccd6_acisf12095_pi14-548_cl_pass1_src13_1.ximg exists
[Mon Oct 10 02:42:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12095_pi14-548_cl_pass1_src13.csv
[Mon Oct 10 02:42:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12095_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12095_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 02:42:21 2011] fullrun_ccd6_acisf12095_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Mon Oct 10 02:42:21 2011] fullrun_ccd6_acisf12095_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Mon Oct 10 02:42:21 2011] Fit fullrun_ccd6_acisf12095_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Mon Oct 10 02:42:37 2011] Spatial fit model total counts = 26.419300, observed total counts = 24.000000
[Mon Oct 10 02:42:37 2011] Offset between fit and detection position for source 17 = 0.833828 pixels
[Mon Oct 10 02:42:37 2011] 26.394000 total counts/ 0.000000 bgd. counts: snr = 347366460932703.187500
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.833828 pixels
  Position = (1116.6, 948.2) = 10 5 20.77 -7 37 30.3
  Extent = 1.4 (1.2-1.6)", rotation angle = 0
  Source counts = 26.4 +/- 5.1
  Background counts = 0.0
  Rate = 0.0003 +/- 7e-05
[Mon Oct 10 02:42:37 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 02:42:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 02:42:37 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 02:42:37 2011] Source does appear to be extended
[Mon Oct 10 02:42:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 02:44:12 2011] Not overwriting source region fullrun_ccd6_acisf12095_pi14-548_pass1_cl_src17_src.reg
[Mon Oct 10 02:44:12 2011] Extracting stamp from image fullrun_ccd6_acisf12095_pi14-548_cl_sm2.00.img.gz, (1052, 884) - (1181, 1012)
[Mon Oct 10 02:44:12 2011] Writing fullrun_ccd6_acisf12095_pi14-548_pass1_cl_src17.gif
[Mon Oct 10 02:44:52 2011] ../../acisf12095/products/events/fullrun_ccd6_acisf12095_pi14-548_pass1_cl_src17_src.evt and ../../acisf12095/products/events/fullrun_ccd6_acisf12095_pi14-548_pass1_cl_src17_bgd.evt exist, delete to re-create
[Mon Oct 10 02:44:52 2011] Size of ../../acisf12095/products/events/fullrun_ccd6_acisf12095_pi14-548_pass1_cl_src17_src.evt.gz[events] = 29 counts
[Mon Oct 10 02:44:52 2011] Mean chipx,y = (685.90, 92.55)
[Mon Oct 10 02:44:52 2011] Mean tdetx,y = (3560.90, 1794.55)
[Mon Oct 10 02:44:52 2011] chipx,y range = (665.00-702.00, 72.00-108.00)
[Mon Oct 10 02:44:52 2011] Size of ../../acisf12095/products/events/fullrun_ccd6_acisf12095_pi14-548_pass1_cl_src17_bgd.evt.gz[events] = 105 counts
[Mon Oct 10 02:44:52 2011] ../../acisf12095/products/images/fullrun_ccd6_acisf12095_pi14-548_pass1_cl_src17_src.img and ../../acisf12095/products/images/fullrun_ccd6_acisf12095_pi14-548_pass1_cl_src17_bgd.img exist, delete to re-create
[Mon Oct 10 02:44:52 2011] ../../acisf12095/products/spectra/fullrun_ccd6_acisf12095_pi14-548_pass1_cl_src17_src.pi and ../../acisf12095/products/spectra/fullrun_ccd6_acisf12095_pi14-548_pass1_cl_src17_bgd.pi exist, delete to re-create
[Mon Oct 10 02:44:52 2011] Not generating rmf since there are only 26 counts
[Mon Oct 10 02:44:55 2011] ../../acisf12095/products/lightcurves/fullrun_ccd6_acisf12095_pi14-548_pass1_cl_src17_src.lc and ../../acisf12095/products/lightcurves/fullrun_ccd6_acisf12095_pi14-548_pass1_cl_src17_bgd.lc exist, delete to re-create
[Mon Oct 10 02:45:06 2011] 183.374
[Mon Oct 10 02:49:38 2011] Updating aperture counts using extracted products
[Mon Oct 10 02:49:38 2011] Error reading totcts from fullrun_ccd6_acisf12095_pi14-548_pass1_cl_src17_src.pi.gz
[Mon Oct 10 02:49:38 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 02:49:38 2011] Using photon index=1.80, rate=0.000349, arf fullrun_ccd6_acisf12095_pi14-548_pass1_cl_src17.arf
[Mon Oct 10 02:49:38 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 02:49:38 2011] Updating source flux to 4.3e-15
[Mon Oct 10 02:49:56 2011] Source 17 has fewer than 100.000000 counts, skipping spectral fitting