[Mon Oct 10 02:39:56 2011] Detection parameters:
  Position = (482.6, 1089.7) = 10 5 41.73 -7 36 20.4
  Extent = 3.1" x 2.8", rotation angle = 14 degrees
  Source counts = 272.9 +/- 19.3
  Background counts = 98.1
  Rate = 0.004 +/- 0.0003

[Mon Oct 10 02:39:59 2011] Off-axis axis estimate = 9.40'
[Mon Oct 10 02:41:27 2011] Using EEF radius (= 3.91 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 02:41:27 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 10 02:41:27 2011] Initial guess for spatial extent in simple fitting = 3.91"
[Mon Oct 10 02:41:27 2011] source mask rpix=7.9, npix_max = 285, mask sum = 289, frac = 1.013
[Mon Oct 10 02:41:27 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.91"
[Mon Oct 10 02:41:28 2011] fullrun_ccd6_acisf12095_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 10 02:41:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12095_pi14-548_cl_pass0_src1.csv
[Mon Oct 10 02:41:28 2011] fullrun_ccd6_acisf12095_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 10 02:41:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12095_pi14-548_cl_pass0_src1.csv
[Mon Oct 10 02:41:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12095_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12095_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 02:41:29 2011] fullrun_ccd6_acisf12095_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 10 02:41:29 2011] fullrun_ccd6_acisf12095_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 10 02:41:29 2011] Fit fullrun_ccd6_acisf12095_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 10 02:41:44 2011] Spatial fit model total counts = 403.726000, observed total counts = 402.000000
[Mon Oct 10 02:41:44 2011] Offset between fit and detection position for source 1 = 1.112973 pixels
[Mon Oct 10 02:41:44 2011] 403.235000 total counts/ 108.718000 bgd. counts: snr = 28.246175
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.112973 pixels
  Position = (483.7, 1089.6) = 10 5 41.71 -7 36 20.7
  Extent = 4.7 (4.2-5.2)", rotation angle = 0
  Source counts = 294.5 +/- 20.1
  Background counts = 108.7
  Rate = 0.004 +/- 0.0003
[Mon Oct 10 02:41:44 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 02:41:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 02:41:44 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 02:41:44 2011] Source does appear to be extended
[Mon Oct 10 02:41:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 02:42:20 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 10 02:42:20 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 10 02:42:20 2011] Initial guess for spatial extent in simple fitting = 4.71"
[Mon Oct 10 02:42:20 2011] source mask rpix=9.6, npix_max = 405, mask sum = 400, frac = 0.987
[Mon Oct 10 02:42:20 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.71"
[Mon Oct 10 02:42:20 2011] fullrun_ccd6_acisf12095_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 10 02:42:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12095_pi14-548_cl_pass1_src1.csv
[Mon Oct 10 02:42:20 2011] fullrun_ccd6_acisf12095_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 10 02:42:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12095_pi14-548_cl_pass1_src1.csv
[Mon Oct 10 02:42:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12095_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12095_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 02:42:20 2011] fullrun_ccd6_acisf12095_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 10 02:42:20 2011] fullrun_ccd6_acisf12095_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 10 02:42:20 2011] Fit fullrun_ccd6_acisf12095_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 10 02:42:36 2011] Spatial fit model total counts = 441.855000, observed total counts = 439.000000
[Mon Oct 10 02:42:36 2011] Offset between fit and detection position for source 1 = 0.106457 pixels
[Mon Oct 10 02:42:36 2011] 441.042000 total counts/ 139.749000 bgd. counts: snr = 25.486763
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.106457 pixels
  Position = (483.8, 1089.6) = 10 5 41.70 -7 36 20.7
  Extent = 4.8 (4.3-5.2)", rotation angle = 0
  Source counts = 301.3 +/- 21.0
  Background counts = 139.7
  Rate = 0.004 +/- 0.0003
[Mon Oct 10 02:42:37 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 02:42:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 02:42:37 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 02:42:37 2011] Source does appear to be extended
[Mon Oct 10 02:42:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 02:44:10 2011] Not overwriting source region fullrun_ccd6_acisf12095_pi14-548_pass1_cl_src1_src.reg
[Mon Oct 10 02:44:10 2011] Extracting stamp from image fullrun_ccd6_acisf12095_pi14-548_cl_sm2.00.img.gz, (265, 871) - (702, 1308)
[Mon Oct 10 02:44:10 2011] Writing fullrun_ccd6_acisf12095_pi14-548_pass1_cl_src1.gif
[Mon Oct 10 02:44:13 2011] ../../acisf12095/products/events/fullrun_ccd6_acisf12095_pi14-548_pass1_cl_src1_src.evt and ../../acisf12095/products/events/fullrun_ccd6_acisf12095_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Oct 10 02:44:13 2011] Size of ../../acisf12095/products/events/fullrun_ccd6_acisf12095_pi14-548_pass1_cl_src1_src.evt.gz[events] = 415 counts
[Mon Oct 10 02:44:13 2011] Mean chipx,y = (94.47, 362.30)
[Mon Oct 10 02:44:13 2011] Mean tdetx,y = (2969.47, 2064.30)
[Mon Oct 10 02:44:13 2011] chipx,y range = (48.00-141.00, 316.00-413.00)
[Mon Oct 10 02:44:13 2011] Size of ../../acisf12095/products/events/fullrun_ccd6_acisf12095_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 966 counts
[Mon Oct 10 02:44:13 2011] ../../acisf12095/products/images/fullrun_ccd6_acisf12095_pi14-548_pass1_cl_src1_src.img and ../../acisf12095/products/images/fullrun_ccd6_acisf12095_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Oct 10 02:44:13 2011] ../../acisf12095/products/spectra/fullrun_ccd6_acisf12095_pi14-548_pass1_cl_src1_src.pi and ../../acisf12095/products/spectra/fullrun_ccd6_acisf12095_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Oct 10 02:44:17 2011] ../../acisf12095/products/lightcurves/fullrun_ccd6_acisf12095_pi14-548_pass1_cl_src1_src.lc and ../../acisf12095/products/lightcurves/fullrun_ccd6_acisf12095_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Oct 10 02:45:06 2011] Keeping rmf generated by specextract
[Mon Oct 10 02:45:06 2011] 167.87
[Mon Oct 10 02:49:38 2011] Updating aperture counts using extracted products
[Mon Oct 10 02:49:38 2011] Error reading totcts from fullrun_ccd6_acisf12095_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Oct 10 02:49:38 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 02:49:38 2011] Using photon index=1.80, rate=0.00398, arf fullrun_ccd6_acisf12095_pi14-548_pass1_cl_src1.arf
[Mon Oct 10 02:49:38 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 02:49:38 2011] Updating source flux to 4.9e-14
[Mon Oct 10 02:50:06 2011] Reading fit data from acisf12095/analysis//spectral/fullrun_ccd6_acisf12095_pi14-548_pass1_cl_src1_pl.csv
[Mon Oct 10 02:50:06 2011] Spectral fit parameter nH value = 5.54191e+20
[Mon Oct 10 02:50:06 2011] Spectral fit parameter PhoIndex value = 1.99994
[Mon Oct 10 02:50:06 2011] Failed to get F(0.3-8.0) from acisf12095/analysis//spectral/fullrun_ccd6_acisf12095_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Oct 10 02:50:06 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 02:50:06 2011] Using Nh = 5.5e+20, photon index=2.00, rate=0.00398, arf fullrun_ccd6_acisf12095_pi14-548_pass1_cl_src1.arf
[Mon Oct 10 02:50:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 02:50:06 2011] Updating source flux to 4.6e-14