[Wed Oct 19 08:59:41 2011] Detection parameters:
  Position = (806.4, 1176.5) = 5 27 56.41 -52 57 11.3
  Extent = 0.5" x 0.5", rotation angle = 62 degrees
  Source counts = 15.6 +/- 4.0
  Background counts = 0.4
  Rate = 0.0008 +/- 0.0002

[Wed Oct 19 08:59:41 2011] Off-axis axis estimate = 0.93'
[Wed Oct 19 09:44:22 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 09:44:22 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Wed Oct 19 09:44:22 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.389
[Wed Oct 19 09:44:22 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.38"
[Wed Oct 19 10:02:58 2011] fullrun_ccd3_acisf12092_pi14-548_cl_pass0_src10.ximg exists
[Wed Oct 19 10:02:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12092_pi14-548_cl_pass0_src10.csv
[Wed Oct 19 10:02:58 2011] fullrun_ccd3_acisf12092_pi14-548_cl_pass0_src10_1.ximg exists
[Wed Oct 19 10:02:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12092_pi14-548_cl_pass0_src10.csv
[Wed Oct 19 10:02:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12092_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12092_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 10:02:58 2011] fullrun_ccd3_acisf12092_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Wed Oct 19 10:02:58 2011] fullrun_ccd3_acisf12092_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Oct 19 10:02:58 2011] Fit fullrun_ccd3_acisf12092_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Wed Oct 19 11:01:46 2011] Spatial fit model total counts = 19.000000, observed total counts = 19.000000
[Wed Oct 19 11:01:46 2011] Offset between fit and detection position for source 8 = 0.988691 pixels
[Wed Oct 19 11:01:46 2011] 18.994810 total counts/ 4.286910 bgd. counts: snr = 7.103600
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.988691 pixels
  Position = (807.0, 1177.3) = 5 27 56.40 -52 57 11.1
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 14.7 +/- 4.4
  Background counts = 4.3
  Rate = 0.0007 +/- 0.0002
[Wed Oct 19 11:01:46 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 11:01:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 11:01:46 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 11:01:46 2011] Source does appear to be extended
[Wed Oct 19 11:01:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 11:35:03 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 11:35:03 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Wed Oct 19 11:35:03 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.781
[Wed Oct 19 11:35:03 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.44"
[Wed Oct 19 11:51:52 2011] fullrun_ccd3_acisf12092_pi14-548_cl_pass1_src10.ximg exists
[Wed Oct 19 11:51:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12092_pi14-548_cl_pass1_src10.csv
[Wed Oct 19 11:51:52 2011] fullrun_ccd3_acisf12092_pi14-548_cl_pass1_src10_1.ximg exists
[Wed Oct 19 11:51:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12092_pi14-548_cl_pass1_src10.csv
[Wed Oct 19 11:51:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12092_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12092_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 11:51:52 2011] fullrun_ccd3_acisf12092_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Wed Oct 19 11:51:52 2011] fullrun_ccd3_acisf12092_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Oct 19 11:51:52 2011] Fit fullrun_ccd3_acisf12092_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Wed Oct 19 12:42:23 2011] Spatial fit model total counts = 18.993100, observed total counts = 19.000000
[Wed Oct 19 12:42:23 2011] Offset between fit and detection position for source 8 = 0.003638 pixels
[Wed Oct 19 12:42:23 2011] 18.897720 total counts/ 4.193720 bgd. counts: snr = 7.180187
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.003638 pixels
  Position = (807.0, 1177.3) = 5 27 56.40 -52 57 11.1
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 14.7 +/- 4.3
  Background counts = 4.2
  Rate = 0.0007 +/- 0.0002
[Wed Oct 19 12:42:23 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 12:42:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 12:42:23 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 12:42:23 2011] Source does appear to be extended
[Wed Oct 19 12:42:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 13:03:41 2011] Writing source region out to fullrun_ccd3_acisf12092_pi14-548_pass1_cl_src8_src.reg
[Wed Oct 19 13:03:41 2011] Extracting stamp from image fullrun_ccd3_acisf12092_pi14-548_cl_sm2.00.img.gz, (787, 1157) - (827, 1197)
[Wed Oct 19 13:03:41 2011] Writing fullrun_ccd3_acisf12092_pi14-548_pass1_cl_src8.gif
[Wed Oct 19 13:08:51 2011] Size of ../../acisf12092/products/events/fullrun_ccd3_acisf12092_pi14-548_pass1_cl_src8_src.evt.gz[events] = 15 counts
[Wed Oct 19 13:08:51 2011] Mean chipx,y = (722.53, 958.67)
[Wed Oct 19 13:08:51 2011] Mean tdetx,y = (4173.33, 3783.53)
[Wed Oct 19 13:08:51 2011] chipx,y range = (702.00-737.00, 940.00-974.00)
[Wed Oct 19 13:08:51 2011] Size of ../../acisf12092/products/events/fullrun_ccd3_acisf12092_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 7 counts
[Wed Oct 19 13:08:52 2011] Not generating rmf since there are only 14 counts
[Wed Oct 19 13:08:52 2011] arf not found, will run specextract
[Wed Oct 19 13:09:20 2011] ../../acisf12092/products/spectra/fullrun_ccd3_acisf12092_pi14-548_pass1_cl_src8.warf not found
[Wed Oct 19 13:09:20 2011] ../../acisf12092/products/spectra/fullrun_ccd3_acisf12092_pi14-548_pass1_cl_src8.wrmf not found
[Wed Oct 19 13:09:20 2011] Removal of ../../acisf12092/products/spectra/fullrun_ccd3_acisf12092_pi14-548_pass1_cl_src8.soff failed
[Wed Oct 19 13:18:22 2011] Spectrum 8 has only 15 counts, deleting rmf
[Wed Oct 19 13:18:22 2011] 202.366
[Wed Oct 19 13:19:44 2011] Updating aperture counts using extracted products
[Wed Oct 19 13:19:44 2011] Error reading totcts from fullrun_ccd3_acisf12092_pi14-548_pass1_cl_src8_src.pi.gz
[Wed Oct 19 13:19:44 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 13:19:44 2011] Using photon index=1.80, rate=0.000744, arf fullrun_ccd3_acisf12092_pi14-548_pass1_cl_src8.arf
[Wed Oct 19 13:19:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 13:19:44 2011] Updating source flux to 8.6e-15
[Wed Oct 19 13:19:50 2011] Source 8 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct 19 13:19:51 2011] acisf12092/analysis//spectral/fullrun_ccd3_acisf12092_pi14-548_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete