[Wed Oct 19 08:59:41 2011] Detection parameters:
  Position = (693.2, 475.1) = 5 28 2.59 -53 2 56.3
  Extent = 1.3" x 0.7", rotation angle = 21 degrees
  Source counts = 24.1 +/- 5.1
  Background counts = 1.9
  Rate = 0.001 +/- 0.0003

[Wed Oct 19 08:59:41 2011] Off-axis axis estimate = 6.04'
[Wed Oct 19 09:44:22 2011] Using EEF radius (= 1.65 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 09:44:22 2011] Initial guess for spatial extent in simple fitting = 1.65"
[Wed Oct 19 09:44:22 2011] source mask rpix=3.4, npix_max = 59, mask sum = 64, frac = 1.077
[Wed Oct 19 09:44:22 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 1.65"
[Wed Oct 19 10:02:58 2011] fullrun_ccd3_acisf12092_pi14-548_cl_pass0_src5.ximg exists
[Wed Oct 19 10:02:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12092_pi14-548_cl_pass0_src5.csv
[Wed Oct 19 10:02:58 2011] fullrun_ccd3_acisf12092_pi14-548_cl_pass0_src5_1.ximg exists
[Wed Oct 19 10:02:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12092_pi14-548_cl_pass0_src5.csv
[Wed Oct 19 10:02:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12092_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12092_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 10:02:58 2011] fullrun_ccd3_acisf12092_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Wed Oct 19 10:02:58 2011] fullrun_ccd3_acisf12092_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Oct 19 10:02:58 2011] Fit fullrun_ccd3_acisf12092_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Oct 19 11:01:46 2011] Spatial fit model total counts = 25.957400, observed total counts = 27.000000
[Wed Oct 19 11:01:46 2011] Offset between fit and detection position for source 17 = 1.870148 pixels
[Wed Oct 19 11:01:46 2011] 25.156833 total counts/ 0.993733 bgd. counts: snr = 24.239173
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.870148 pixels
  Position = (694.9, 476.0) = 5 28 2.53 -53 2 56.1
  Extent = 1.1 (0.8-1.4)", rotation angle = 0
  Source counts = 24.2 +/- 5.0
  Background counts = 1.0
  Rate = 0.001 +/- 0.0003
[Wed Oct 19 11:01:46 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 11:01:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 11:01:46 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 11:01:46 2011] Source does appear to be extended
[Wed Oct 19 11:01:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 11:35:03 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 11:35:03 2011] Initial guess for spatial extent in simple fitting = 1.07"
[Wed Oct 19 11:35:03 2011] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.260
[Wed Oct 19 11:35:03 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 1.07"
[Wed Oct 19 11:51:52 2011] fullrun_ccd3_acisf12092_pi14-548_cl_pass1_src5.ximg exists
[Wed Oct 19 11:51:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12092_pi14-548_cl_pass1_src5.csv
[Wed Oct 19 11:51:52 2011] fullrun_ccd3_acisf12092_pi14-548_cl_pass1_src5_1.ximg exists
[Wed Oct 19 11:51:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12092_pi14-548_cl_pass1_src5.csv
[Wed Oct 19 11:51:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12092_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12092_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 11:51:52 2011] fullrun_ccd3_acisf12092_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Wed Oct 19 11:51:52 2011] fullrun_ccd3_acisf12092_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Oct 19 11:51:52 2011] Fit fullrun_ccd3_acisf12092_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Oct 19 12:42:23 2011] Spatial fit model total counts = 25.081600, observed total counts = 25.000000
[Wed Oct 19 12:42:23 2011] Offset between fit and detection position for source 17 = 0.370628 pixels
[Wed Oct 19 12:42:23 2011] 24.661750 total counts/ 4.854750 bgd. counts: snr = 8.989494
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.370628 pixels
  Position = (694.5, 476.0) = 5 28 2.55 -53 2 56.1
  Extent = 0.9 (0.6-1.2)", rotation angle = 0
  Source counts = 19.8 +/- 5.0
  Background counts = 4.9
  Rate = 0.001 +/- 0.0003
[Wed Oct 19 12:42:23 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 12:42:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 12:42:23 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 12:42:23 2011] Source does appear to be extended
[Wed Oct 19 12:42:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 13:03:41 2011] Writing source region out to fullrun_ccd3_acisf12092_pi14-548_pass1_cl_src17_src.reg
[Wed Oct 19 13:03:41 2011] Extracting stamp from image fullrun_ccd3_acisf12092_pi14-548_cl_sm2.00.img.gz, (654, 435) - (735, 516)
[Wed Oct 19 13:03:41 2011] Writing fullrun_ccd3_acisf12092_pi14-548_pass1_cl_src17.gif
[Wed Oct 19 13:05:50 2011] Size of ../../acisf12092/products/events/fullrun_ccd3_acisf12092_pi14-548_pass1_cl_src17_src.evt.gz[events] = 23 counts
[Wed Oct 19 13:05:50 2011] Mean chipx,y = (392.22, 322.83)
[Wed Oct 19 13:05:50 2011] Mean tdetx,y = (4809.17, 3453.22)
[Wed Oct 19 13:05:50 2011] chipx,y range = (371.00-407.00, 307.00-338.00)
[Wed Oct 19 13:05:50 2011] Size of ../../acisf12092/products/events/fullrun_ccd3_acisf12092_pi14-548_pass1_cl_src17_bgd.evt.gz[events] = 14 counts
[Wed Oct 19 13:05:51 2011] Not generating rmf since there are only 19 counts
[Wed Oct 19 13:05:51 2011] arf not found, will run specextract
[Wed Oct 19 13:06:18 2011] ../../acisf12092/products/spectra/fullrun_ccd3_acisf12092_pi14-548_pass1_cl_src17.warf not found
[Wed Oct 19 13:06:18 2011] ../../acisf12092/products/spectra/fullrun_ccd3_acisf12092_pi14-548_pass1_cl_src17.wrmf not found
[Wed Oct 19 13:06:18 2011] Removal of ../../acisf12092/products/spectra/fullrun_ccd3_acisf12092_pi14-548_pass1_cl_src17.soff failed
[Wed Oct 19 13:18:22 2011] Spectrum 17 has only 20 counts, deleting rmf
[Wed Oct 19 13:18:22 2011] 181.323
[Wed Oct 19 13:19:44 2011] Updating aperture counts using extracted products
[Wed Oct 19 13:19:44 2011] Error reading totcts from fullrun_ccd3_acisf12092_pi14-548_pass1_cl_src17_src.pi.gz
[Wed Oct 19 13:19:44 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 13:19:44 2011] Using photon index=1.80, rate=0.001, arf fullrun_ccd3_acisf12092_pi14-548_pass1_cl_src17.arf
[Wed Oct 19 13:19:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 13:19:44 2011] Updating source flux to 1.3e-14
[Wed Oct 19 13:19:50 2011] Source 17 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct 19 13:19:51 2011] acisf12092/analysis//spectral/fullrun_ccd3_acisf12092_pi14-548_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete