[Wed Oct 19 08:57:54 2011] Detection parameters:
  Position = (713.1, 114.2) = 5 28 12.35 -52 54 2.9
  Extent = 1.1" x 0.6", rotation angle = 106 degrees
  Source counts = 25.2 +/- 5.1
  Background counts = 0.8
  Rate = 0.001 +/- 0.0003

[Wed Oct 19 08:57:54 2011] Off-axis axis estimate = 4.58'
[Wed Oct 19 09:02:16 2011] Using EEF radius (= 1.02 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 09:02:16 2011] Initial guess for spatial extent in simple fitting = 1.02"
[Wed Oct 19 09:02:16 2011] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.129
[Wed Oct 19 09:02:16 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 1.02"
[Wed Oct 19 09:20:21 2011] fullrun_ccd0_acisf12092_pi14-548_cl_pass0_src6.ximg exists
[Wed Oct 19 09:20:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12092_pi14-548_cl_pass0_src6.csv
[Wed Oct 19 09:20:22 2011] fullrun_ccd0_acisf12092_pi14-548_cl_pass0_src6_1.ximg exists
[Wed Oct 19 09:20:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12092_pi14-548_cl_pass0_src6.csv
[Wed Oct 19 09:20:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12092_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12092_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 09:20:22 2011] fullrun_ccd0_acisf12092_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Wed Oct 19 09:20:22 2011] fullrun_ccd0_acisf12092_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Oct 19 09:20:22 2011] Fit fullrun_ccd0_acisf12092_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Wed Oct 19 11:01:41 2011] Spatial fit model total counts = 25.342900, observed total counts = 26.000000
[Wed Oct 19 11:01:41 2011] Offset between fit and detection position for source 6 = 1.137358 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 1.137358 pixels
  Position = (713.3, 115.3) = 5 28 12.36 -52 54 2.6
  Extent = 1.1 (0.9-1.4)", rotation angle = 0
  Source counts = 25.2 +/- 5.0
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Wed Oct 19 11:01:41 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 11:01:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 11:01:41 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 11:01:41 2011] Source does appear to be extended
[Wed Oct 19 11:01:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 11:02:03 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 11:02:03 2011] Initial guess for spatial extent in simple fitting = 1.08"
[Wed Oct 19 11:02:03 2011] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.855
[Wed Oct 19 11:02:03 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 1.08"
[Wed Oct 19 11:15:21 2011] fullrun_ccd0_acisf12092_pi14-548_cl_pass1_src6.ximg exists
[Wed Oct 19 11:15:21 2011] fullrun_ccd0_acisf12092_pi14-548_cl_pass1_src6_1.ximg exists
[Wed Oct 19 11:15:21 2011] Fit fullrun_ccd0_acisf12092_pi14-548_cl_pass1_src6 appears to have run properly
[Wed Oct 19 11:15:21 2011] fullrun_ccd0_acisf12092_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Wed Oct 19 11:15:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12092_pi14-548_cl_pass1_tfrozen_src6.csv
[Wed Oct 19 11:15:21 2011] fullrun_ccd0_acisf12092_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Oct 19 11:15:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12092_pi14-548_cl_pass1_tfrozen_src6.csv
[Wed Oct 19 11:15:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12092_pi14-548_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12092_pi14-548_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 12:42:19 2011] Spatial fit model total counts = 23.684900, observed total counts = 26.000000
[Wed Oct 19 12:42:19 2011] Offset between fit and detection position for source 6 = 0.311797 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.311797 pixels
  Position = (713.2, 115.5) = 5 28 12.37 -52 54 2.4
  Extent = 1.0 (0.8-1.3)", rotation angle = 0
  Source counts = 23.6 +/- 4.9
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Wed Oct 19 12:42:19 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 12:42:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 12:42:19 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 12:42:19 2011] Source does appear to be extended
[Wed Oct 19 12:42:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 12:42:39 2011] Writing source region out to fullrun_ccd0_acisf12092_pi14-548_pass1_cl_src6_src.reg
[Wed Oct 19 12:42:39 2011] Extracting stamp from image fullrun_ccd0_acisf12092_pi14-548_cl_sm2.00.img.gz, (667, 70) - (759, 162)
[Wed Oct 19 12:42:39 2011] Writing fullrun_ccd0_acisf12092_pi14-548_pass1_cl_src6.gif
[Wed Oct 19 12:45:30 2011] Size of ../../acisf12092/products/events/fullrun_ccd0_acisf12092_pi14-548_pass1_cl_src6_src.evt.gz[events] = 26 counts
[Wed Oct 19 12:45:30 2011] Mean chipx,y = (888.69, 983.15)
[Wed Oct 19 12:45:30 2011] Mean tdetx,y = (4044.15, 4243.31)
[Wed Oct 19 12:45:30 2011] chipx,y range = (870.00-909.00, 968.00-1003.00)
[Wed Oct 19 12:45:30 2011] Size of ../../acisf12092/products/events/fullrun_ccd0_acisf12092_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 12 counts
[Wed Oct 19 12:45:31 2011] Not generating rmf since there are only 23 counts
[Wed Oct 19 12:45:31 2011] arf not found, will run specextract
[Wed Oct 19 12:45:58 2011] ../../acisf12092/products/spectra/fullrun_ccd0_acisf12092_pi14-548_pass1_cl_src6.warf not found
[Wed Oct 19 12:45:58 2011] ../../acisf12092/products/spectra/fullrun_ccd0_acisf12092_pi14-548_pass1_cl_src6.wrmf not found
[Wed Oct 19 12:45:58 2011] Removal of ../../acisf12092/products/spectra/fullrun_ccd0_acisf12092_pi14-548_pass1_cl_src6.soff failed
[Wed Oct 19 12:48:26 2011] Spectrum 6 has only 24 counts, deleting rmf
[Wed Oct 19 12:48:26 2011] 191.576
[Wed Oct 19 13:19:43 2011] Updating aperture counts using extracted products
[Wed Oct 19 13:19:43 2011] Error reading totcts from fullrun_ccd0_acisf12092_pi14-548_pass1_cl_src6_src.pi.gz
[Wed Oct 19 13:19:43 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 13:19:43 2011] Using photon index=1.80, rate=0.00119, arf fullrun_ccd0_acisf12092_pi14-548_pass1_cl_src6.arf
[Wed Oct 19 13:19:43 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 13:19:43 2011] Updating source flux to 1.4e-14
[Wed Oct 19 13:19:47 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct 19 13:19:48 2011] acisf12092/analysis//spectral/fullrun_ccd0_acisf12092_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete