[Wed Oct  5 22:07:57 2011] Detection parameters:
  Position = (949.8, 527.0) = 23 42 29.96 -54 12 17.1
  Extent = 0.5" x 0.5", rotation angle = 122 degrees
  Source counts = 10.6 +/- 3.3
  Background counts = 0.4
  Rate = 0.0003 +/- 9e-05

[Wed Oct  5 22:07:58 2011] Off-axis axis estimate = 1.33'
[Wed Oct  5 22:08:51 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 22:08:51 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Wed Oct  5 22:08:51 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.911
[Wed Oct  5 22:08:51 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 0.39"
[Wed Oct  5 22:08:53 2011] fullrun_ccd3_acisf12091_pi14-548_cl_pass0_src17.ximg exists
[Wed Oct  5 22:08:54 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12091_pi14-548_cl_pass0_src17.csv
[Wed Oct  5 22:08:54 2011] fullrun_ccd3_acisf12091_pi14-548_cl_pass0_src17_1.ximg exists
[Wed Oct  5 22:08:54 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12091_pi14-548_cl_pass0_src17.csv
[Wed Oct  5 22:08:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12091_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12091_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 22:08:54 2011] fullrun_ccd3_acisf12091_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Wed Oct  5 22:08:54 2011] fullrun_ccd3_acisf12091_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Wed Oct  5 22:08:54 2011] Fit fullrun_ccd3_acisf12091_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Wed Oct  5 22:09:05 2011] Spatial fit model total counts = 12.508000, observed total counts = 13.000000
[Wed Oct  5 22:09:05 2011] Offset between fit and detection position for source 5 = 0.509121 pixels
[Wed Oct  5 22:09:05 2011] 12.508100 total counts/ 0.000000 bgd. counts: snr = 72005240818.341034
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.509121 pixels
  Position = (950.2, 527.3) = 23 42 29.97 -54 12 17.2
  Extent = 0.6 (0.4-0.7)", rotation angle = 0
  Source counts = 12.5 +/- 3.5
  Background counts = 0.0
  Rate = 0.0003 +/- 9e-05
[Wed Oct  5 22:09:05 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 22:09:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 22:09:05 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 22:09:05 2011] Source does appear to be extended
[Wed Oct  5 22:09:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 22:09:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 22:09:29 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Wed Oct  5 22:09:29 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.808
[Wed Oct  5 22:09:29 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 0.57"
[Wed Oct  5 22:09:29 2011] fullrun_ccd3_acisf12091_pi14-548_cl_pass1_src17.ximg exists
[Wed Oct  5 22:09:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12091_pi14-548_cl_pass1_src17.csv
[Wed Oct  5 22:09:29 2011] fullrun_ccd3_acisf12091_pi14-548_cl_pass1_src17_1.ximg exists
[Wed Oct  5 22:09:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12091_pi14-548_cl_pass1_src17.csv
[Wed Oct  5 22:09:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12091_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12091_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 22:09:30 2011] fullrun_ccd3_acisf12091_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Wed Oct  5 22:09:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12091_pi14-548_cl_pass1_tfrozen_src17.csv
[Wed Oct  5 22:09:30 2011] fullrun_ccd3_acisf12091_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Wed Oct  5 22:09:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12091_pi14-548_cl_pass1_tfrozen_src17.csv
[Wed Oct  5 22:09:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12091_pi14-548_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12091_pi14-548_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 22:09:42 2011] Spatial fit model total counts = 10.973100, observed total counts = 13.000000
[Wed Oct  5 22:09:42 2011] Offset between fit and detection position for source 5 = 0.096303 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.096303 pixels
  Position = (950.2, 527.4) = 23 42 29.97 -54 12 17.1
  Extent = 0.6 (0.4-0.7)", rotation angle = 0
  Source counts = 11.0 +/- 3.3
  Background counts = 0.0
  Rate = 0.0003 +/- 9e-05
[Wed Oct  5 22:09:42 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 22:09:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 22:09:42 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 22:09:42 2011] Source does appear to be extended
[Wed Oct  5 22:09:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 22:13:23 2011] Not overwriting source region fullrun_ccd3_acisf12091_pi14-548_pass1_cl_src5_src.reg
[Wed Oct  5 22:13:23 2011] Extracting stamp from image fullrun_ccd3_acisf12091_pi14-548_cl_sm2.00.img.gz, (924, 501) - (976, 553)
[Wed Oct  5 22:13:23 2011] Writing fullrun_ccd3_acisf12091_pi14-548_pass1_cl_src5.gif
[Wed Oct  5 22:17:13 2011] ../../acisf12091/products/events/fullrun_ccd3_acisf12091_pi14-548_pass1_cl_src5_src.evt and ../../acisf12091/products/events/fullrun_ccd3_acisf12091_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Wed Oct  5 22:17:13 2011] Size of ../../acisf12091/products/events/fullrun_ccd3_acisf12091_pi14-548_pass1_cl_src5_src.evt.gz[events] = 11 counts
[Wed Oct  5 22:17:13 2011] Mean chipx,y = (513.73, 902.91)
[Wed Oct  5 22:17:13 2011] Mean tdetx,y = (4229.09, 3574.73)
[Wed Oct  5 22:17:13 2011] chipx,y range = (499.00-534.00, 888.00-920.00)
[Wed Oct  5 22:17:14 2011] Size of ../../acisf12091/products/events/fullrun_ccd3_acisf12091_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 7 counts
[Wed Oct  5 22:17:15 2011] ../../acisf12091/products/images/fullrun_ccd3_acisf12091_pi14-548_pass1_cl_src5_src.img and ../../acisf12091/products/images/fullrun_ccd3_acisf12091_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Wed Oct  5 22:17:15 2011] ../../acisf12091/products/spectra/fullrun_ccd3_acisf12091_pi14-548_pass1_cl_src5_src.pi and ../../acisf12091/products/spectra/fullrun_ccd3_acisf12091_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Wed Oct  5 22:17:15 2011] Not generating rmf since there are only 10 counts
[Wed Oct  5 22:17:25 2011] ../../acisf12091/products/lightcurves/fullrun_ccd3_acisf12091_pi14-548_pass1_cl_src5_src.lc and ../../acisf12091/products/lightcurves/fullrun_ccd3_acisf12091_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Wed Oct  5 22:18:22 2011] 187.125
[Wed Oct  5 22:18:43 2011] Updating aperture counts using extracted products
[Wed Oct  5 22:18:43 2011] Error reading totcts from fullrun_ccd3_acisf12091_pi14-548_pass1_cl_src5_src.pi.gz
[Wed Oct  5 22:18:43 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 22:18:43 2011] Using photon index=1.80, rate=0.000291, arf fullrun_ccd3_acisf12091_pi14-548_pass1_cl_src5.arf
[Wed Oct  5 22:18:43 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 22:18:43 2011] Updating source flux to 3.7e-15
[Wed Oct  5 22:19:04 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct  5 22:19:05 2011] acisf12091/analysis//spectral/fullrun_ccd3_acisf12091_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete