[Wed Oct  5 22:07:56 2011] Detection parameters:
  Position = (522.6, 347.0) = 23 41 55.63 -54 14 27.3
  Extent = 0.7" x 0.5", rotation angle = 12 degrees
  Source counts = 109.8 +/- 10.6
  Background counts = 2.2
  Rate = 0.003 +/- 0.0003

[Wed Oct  5 22:07:57 2011] Off-axis axis estimate = 4.96'
[Wed Oct  5 22:08:49 2011] Using EEF radius (= 1.17 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 22:08:49 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 22:08:49 2011] Initial guess for spatial extent in simple fitting = 1.17"
[Wed Oct  5 22:08:49 2011] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.911
[Wed Oct  5 22:08:49 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.17"
[Wed Oct  5 22:08:50 2011] fullrun_ccd2_acisf12091_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct  5 22:08:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12091_pi14-548_cl_pass0_src1.csv
[Wed Oct  5 22:08:50 2011] fullrun_ccd2_acisf12091_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct  5 22:08:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12091_pi14-548_cl_pass0_src1.csv
[Wed Oct  5 22:08:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12091_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12091_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 22:08:50 2011] fullrun_ccd2_acisf12091_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct  5 22:08:50 2011] fullrun_ccd2_acisf12091_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct  5 22:08:50 2011] Fit fullrun_ccd2_acisf12091_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct  5 22:09:02 2011] Spatial fit model total counts = 121.999000, observed total counts = 122.000000
[Wed Oct  5 22:09:02 2011] Offset between fit and detection position for source 3 = 0.765557 pixels
[Wed Oct  5 22:09:02 2011] 122.499000 total counts/ 18.907000 bgd. counts: snr = 23.824012
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.765557 pixels
  Position = (523.1, 347.5) = 23 41 55.63 -54 14 27.3
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 103.6 +/- 11.1
  Background counts = 18.9
  Rate = 0.003 +/- 0.0003
[Wed Oct  5 22:09:02 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 22:09:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 22:09:02 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 22:09:02 2011] Source does appear to be extended
[Wed Oct  5 22:09:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 22:09:28 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 22:09:28 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 22:09:28 2011] Initial guess for spatial extent in simple fitting = 0.84"
[Wed Oct  5 22:09:28 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.026
[Wed Oct  5 22:09:28 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.84"
[Wed Oct  5 22:09:28 2011] fullrun_ccd2_acisf12091_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct  5 22:09:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12091_pi14-548_cl_pass1_src1.csv
[Wed Oct  5 22:09:28 2011] fullrun_ccd2_acisf12091_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct  5 22:09:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12091_pi14-548_cl_pass1_src1.csv
[Wed Oct  5 22:09:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12091_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12091_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 22:09:28 2011] fullrun_ccd2_acisf12091_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct  5 22:09:28 2011] fullrun_ccd2_acisf12091_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct  5 22:09:28 2011] Fit fullrun_ccd2_acisf12091_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct  5 22:09:39 2011] Spatial fit model total counts = 119.126000, observed total counts = 117.000000
[Wed Oct  5 22:09:39 2011] Offset between fit and detection position for source 3 = 0.031949 pixels
[Wed Oct  5 22:09:39 2011] 118.831700 total counts/ 13.688700 bgd. counts: snr = 28.418376
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.031949 pixels
  Position = (523.1, 347.6) = 23 41 55.63 -54 14 27.3
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 105.1 +/- 10.9
  Background counts = 13.7
  Rate = 0.003 +/- 0.0003
[Wed Oct  5 22:09:39 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 22:09:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 22:09:39 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 22:09:39 2011] Source does appear to be extended
[Wed Oct  5 22:09:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 22:11:30 2011] Not overwriting source region fullrun_ccd2_acisf12091_pi14-548_pass1_cl_src3_src.reg
[Wed Oct  5 22:11:30 2011] Extracting stamp from image fullrun_ccd2_acisf12091_pi14-548_cl_sm2.00.img.gz, (485, 309) - (562, 386)
[Wed Oct  5 22:11:30 2011] Writing fullrun_ccd2_acisf12091_pi14-548_pass1_cl_src3.gif
[Wed Oct  5 22:11:32 2011] ../../acisf12091/products/events/fullrun_ccd2_acisf12091_pi14-548_pass1_cl_src3_src.evt and ../../acisf12091/products/events/fullrun_ccd2_acisf12091_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Wed Oct  5 22:11:32 2011] Size of ../../acisf12091/products/events/fullrun_ccd2_acisf12091_pi14-548_pass1_cl_src3_src.evt.gz[events] = 111 counts
[Wed Oct  5 22:11:32 2011] Mean chipx,y = (728.67, 531.20)
[Wed Oct  5 22:11:32 2011] Mean tdetx,y = (3592.20, 3357.33)
[Wed Oct  5 22:11:32 2011] chipx,y range = (708.00-748.00, 512.00-552.00)
[Wed Oct  5 22:11:32 2011] Size of ../../acisf12091/products/events/fullrun_ccd2_acisf12091_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 20 counts
[Wed Oct  5 22:11:32 2011] ../../acisf12091/products/images/fullrun_ccd2_acisf12091_pi14-548_pass1_cl_src3_src.img and ../../acisf12091/products/images/fullrun_ccd2_acisf12091_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Wed Oct  5 22:11:32 2011] ../../acisf12091/products/spectra/fullrun_ccd2_acisf12091_pi14-548_pass1_cl_src3_src.pi and ../../acisf12091/products/spectra/fullrun_ccd2_acisf12091_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Wed Oct  5 22:11:35 2011] ../../acisf12091/products/lightcurves/fullrun_ccd2_acisf12091_pi14-548_pass1_cl_src3_src.lc and ../../acisf12091/products/lightcurves/fullrun_ccd2_acisf12091_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Wed Oct  5 22:13:20 2011] Keeping rmf generated by specextract
[Wed Oct  5 22:13:21 2011] 180.602
[Wed Oct  5 22:18:42 2011] Updating aperture counts using extracted products
[Wed Oct  5 22:18:42 2011] Error reading totcts from fullrun_ccd2_acisf12091_pi14-548_pass1_cl_src3_src.pi.gz
[Wed Oct  5 22:18:42 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 22:18:42 2011] Using photon index=1.80, rate=0.00279, arf fullrun_ccd2_acisf12091_pi14-548_pass1_cl_src3.arf
[Wed Oct  5 22:18:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 22:18:42 2011] Updating source flux to 3.7e-14
[Wed Oct  5 22:19:04 2011] Reading fit data from acisf12091/analysis//spectral/fullrun_ccd2_acisf12091_pi14-548_pass1_cl_src3_pl.csv
[Wed Oct  5 22:19:04 2011] Spectral fit parameter nH value = 1.7264e+16
[Wed Oct  5 22:19:04 2011] Spectral fit parameter PhoIndex value = 1.65073
[Wed Oct  5 22:19:04 2011] Failed to get F(0.3-8.0) from acisf12091/analysis//spectral/fullrun_ccd2_acisf12091_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Wed Oct  5 22:19:04 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 22:19:04 2011] Using Nh = 1.7e+16, photon index=1.65, rate=0.00279, arf fullrun_ccd2_acisf12091_pi14-548_pass1_cl_src3.arf
[Wed Oct  5 22:19:04 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 22:19:04 2011] Updating source flux to 3.9e-14